You are troubleshooting an issue which is causing full-sized packets entering the MPLS cloud be dropped. You have discovered that one of the switches in the MPLS core is not a Cisco switch, but otherwise the MPLS MTU size is set to 1508 bytes on the routers. Based on this information, which of these may be the reason the packets are being dropped?（）A、The switch on you MPLS core that was not produced by Cisco does not support oversized packetsB、No switches support oversized packetsC、By definition, the maximum MTU is 1500 bytesD、As MPLS VPN labeling increases the size of the packet by 8 bytes, the IP MTU should have been changed to 1508
You are troubleshooting an issue which is causing full-sized packets entering the MPLS cloud be dropped. You have discovered that one of the switches in the MPLS core is not a Cisco switch, but otherwise the MPLS MTU size is set to 1508 bytes on the routers. Based on this information, which of these may be the reason the packets are being dropped?（）
- A、The switch on you MPLS core that was not produced by Cisco does not support oversized packets
- B、No switches support oversized packets
- C、By definition, the maximum MTU is 1500 bytes
- D、As MPLS VPN labeling increases the size of the packet by 8 bytes, the IP MTU should have been changed to 1508
相关考题：
Your network contains a server named Server1 that runs Windows Server 2008 R2.You discover that the server unexpectedly shut down several times during the past week.You need to identify what caused the shutdowns and which software was recently installed.What should you click from Action Center？（）A. Maintenance, and then View reliability historyB. Troubleshooting, and then ProgramsC. Troubleshooting, and then System and SecurityD. Troubleshooting, and then View history
Without calling JTAC, which two troubleshooting tools on a MAG Series device would you use to identify the cause of an authentication failure?() A. Remote DebuggingB. System SnapshotC. User Access logsD. Policy Tracing
You are troubleshooting a WAN connection for TestKing, and on the router you execute the, debug ppp authentication command, and view the following output:What kind of handshake was used for the PPP authentication?（）A. one-wayB. two-wayC. three-wayD. No handshakes required during authenticationE. None of the above
While troubleshooting a network connectivity issue, you suspect that a router may be missing a route, or may be receiving bad routing information to a destination. What command should you issue to view the route that the router will use to reach a given destination?（）A. pingB. traceC. show ip routeD. show interfaceE. show cdp neighbors
When you are troubleshooting an ACL issue on a router,which command can help you to verify which interfaces are affected by the ACL?() A.show ip access-listB.show access-listC.list ip interfaceD.show interfaceE.show ip interface
What tasks can only be performed in the default or admin VDC？（）A、 EPLD upgrade， IOS ISSU， FCoE feature enablement， CoPP configuration， and rolling back a checkpointB、 EPLD upgrade， Cisco IOS ISSU， FCoE feature enablement， CoPP configuration， and ACL capture enablementC、 EPLD upgrade， Cisco IOS ISSU， FCoE feature enablement， CoPP configuration and SNMP configurationD、 EPLD upgrade， Cisco IOS ISSU， FCoE feature enablement， CoPP configuration， and write erase
At which stage of the Cisco Lifecycle Services approach would you recommend supporting and troubleshooting the system？ （）A、 PreparationB、 PlanningC、 DesignD、 ImplementationE、 OperationF、 Optimization
You need to uninstall a Windows update from a computer that runs Windows 7. Which Control Panel itemshould you use?（）A、Administrative ToolsB、Programs and FeaturesC、Sync CenterD、Troubleshooting
You are troubleshooting a Catalyst 5000 trunk in the network. What should you do if there’s adisagreement about the VLANs configured to use the trunk？（）A、Reload the active VLAN configurationB、Clear the affected port and bring it up againC、Explicitly set the trunk for the VLAN to be onD、Remove all the VLANs set
As an experienced Network Engineer, you are responsible for network connectivity and system configuration. Which of the following protocols will be supported by Cisco Nonstop Forwarding (NSF)?（）A、ISSU，OSPF，IS-ISB、IETF，OSPF，ISSUC、IS-IS，EIGRP，SSO，BGPD、EIGRP，BGP，OSPF，IS-IS
While troubleshooting a network， you need to verify the liveness of hosts in the subnet 192.168.1.64/26. All of the hosts are able to reply to ping requests. How would you confirm the existing nodes using one single command？（）A、ping 192.168.1.255B、ping with sweep optionC、ping 192.168.1.127D、ping 192.168.1.64E、ping with broadcast option
When you are troubleshooting an ACL issue on a router,which command can help you to verify which interfaces are affected by the ACL?（）A、show ip access-listB、show access-listC、list ip interfaceD、show interfaceE、show ip interface
You are troubleshooting a problem with a Cisco 7920 wireless IP phone that is causing the phone to drop calls. The problem appears to be a roaming bandwidth issue. In order to verify what kind ofissue it is， you decide to increase the bandwidth reserved for roaming on the WLAN controller to themaximum. What level do you set the bandwidth to？（）A、5 percentB、15 percentC、25 percentD、35 percent
While troubleshooting a network connectivity issue, you suspect that a router may be missing a route, or may be receiving bad routing information to a destination. What command should you issue to view the route that the router will use to reach a given destination?（）A、pingB、traceC、show ip routeD、show interfaceE、show cdp neighbors
Your network contains a server named Server1 that runs Windows Server 2008 R2.You discover that the server unexpectedly shut down several times during the past week.You need to identify what caused the shutdowns and which software was recently installed. What should you click from Action Center？（）A、Maintenance, and then View reliability historyB、Troubleshooting, and then ProgramsC、Troubleshooting, and then System and SecurityD、Troubleshooting, and then View history
单选题While troubleshooting a network connectivity issue, you suspect that a router may be missing a route, or may be receiving bad routing information to a destination. What command should you issue to view the route that the router will use to reach a given destination?（）ApingBtraceCshow ip routeDshow interfaceEshow cdp neighbors
单选题At which stage of the Cisco Lifecycle Services approach would you recommend supporting and troubleshooting the system？ （）A PreparationB PlanningC DesignD ImplementationE OperationF Optimization
单选题What tasks can only be performed in the default or admin VDC？（）A EPLD upgrade， IOS ISSU， FCoE feature enablement， CoPP configuration， and rolling back a checkpointB EPLD upgrade， Cisco IOS ISSU， FCoE feature enablement， CoPP configuration， and ACL capture enablementC EPLD upgrade， Cisco IOS ISSU， FCoE feature enablement， CoPP configuration and SNMP configurationD EPLD upgrade， Cisco IOS ISSU， FCoE feature enablement， CoPP configuration， and write erase
多选题When you are troubleshooting duplex mismatches， which two errors are typically seen on the full- duplexend？（）AruntsBFCS errorsCinterface resetsDlate collisions
多选题Your network is suffering from regular outages. After troubleshooting， you learn that the transmit lead of a fiber uplink was damaged. Which two features can prevent the same issues in the future？（）Aroot guardBloop guardCBPDU guardDUDLDEBPDU skew detection
多选题Without calling JTAC, which two troubleshooting tools on a MAG Series device would you use to identify the cause of an authentication failure?（）ARemote DebuggingBSystem SnapshotCUser Access logsDPolicy Tracing
单选题You are troubleshooting a problem with a Cisco 7920 wireless IP phone that is causing the phoneto drop calls. The problem appears to be roaming bandwidth issue. In order to verify what kind ofissue it is， you decide to increase the bandwidth reserve for roaming on the WLAN controller tomaximum. What level do you set the bandwidth to？（）A5 percentB15 percentC25 percentD35 percent
单选题When you are troubleshooting an ACL issue on a router,which command can help you to verify which interfaces are affected by the ACL?（）Ashow ip access-listBshow access-listClist ip interfaceDshow interfaceEshow ip interface
单选题You are troubleshooting a problem with a Cisco 7920 wireless IP phone that is causing the phoneto drop calls. The problem appears to be a roaming bandwidth issue. In order to verify what kind ofissue it is， you decide to increase the bandwidth reserved for roaming on the WLAN controller tothe maximum. What level do you set the bandwidth to？（）A25 percentB15 percentC5 percentD35 percent
单选题You are troubleshooting a frame relay connection and wish to view the LMI traffic stats. Which command should you issue?（）AShow interface lmiBShow frame-relay lmiCShow interface frame-relayDDebug frame-relay interface.
单选题You are the network administrator of a small Layer 2 network with 50 users. Lately， users have been complaining that the network is very slow. While troubleshooting， you notice that the CAM table of your switch is full， although it supports up to 12，000 MAC addresses. How can you solve this issue and prevent it from happening in the future？（）AUpgrade the switchesBConfigure BPDU guardCConfigure VLAN access listsDConfigure port securityEConfigure Dynamic ARP inspection
多选题When you are troubleshooting duplex mismatches， which two errors are typically seen on the fullduplex end？（）AruntsBFCS errorsCinterface resetsDlate collisions