All of the routers in the network are configured with the ip subnet-zero command. Which network addresses should be used for Link A and Network A (Choose two.)（）。A、Network A - 172.16.3.48/26B、Network A - 172.16.3.128/25C、Network A - 172.16.3.192/26D、Link A - 172.16.3.0/30E、Link A - 172.16.3.40/30F、Link A - 172.16.3.112/30
All of the routers in the network are configured with the ip subnet-zero command. Which network addresses should be used for Link A and Network A (Choose two.)（）。
- A、Network A - 172.16.3.48/26
- B、Network A - 172.16.3.128/25
- C、Network A - 172.16.3.192/26
- D、Link A - 172.16.3.0/30
- E、Link A - 172.16.3.40/30
- F、Link A - 172.16.3.112/30
相关考题：
Which routers must be configured with the same authentication string when configuring OSPFauthentication?() A. all routers on a linkB. all routers in an areaC. all external OSPF peersD. all routers in an OSPF domain
There are three IS-IS routers on a Gigabit Ethernet segment: Router A, Router B, and Router C. Each router is configured in the same area and each routers Gigabit Ethernet interface is configured for Level 1-only. Router A is the Designated Intermediate System (DIS). Each routers IP address on that segment is:Router A: 10.1.1.1/24Router B: 10.1.1.2/24Router C: 10.2.2.1/26Which statement is true about all the adjacencies that exist on that LAN?（）A. No routers are adjacent with each other.B. Only Router A and Router B are adjacent at Level 1.C. Only Router A and Router B are adjacent at Level 2.D. All three routers are adjacent with each other at Level 1.
Refer to the exhibit. The Route.com company is running EIGRP between all the r outers. Currently, if one of the LAN links (LAN1 or LAN2) at the headquarters flaps (goes up and down), the HQRTR1 and HQ - RTR2 routers will experience high CPU usage and have a long EIGRP convergence time. As the new network administrator, you are asked to investigate this situation and determine if there is a quick way to resolve this issue. Which is the most important thing that you can quickly verify first to resolve this issue?（）A. Verify that the bandwidth setting on all WAN links is correct.B. Verify that the HQ - RTR1 and HQ - RTR2 routers are configured to send only a default route to all the spoke routers.C. Verify that the HQ - RTR1 and HQ - RTR2 routers are configured for EIGRP Nonstop Forwarding.D. Verify that all the spoke routers are co nfigured for autosummarization.E. Verify that all the spoke routers are configured as EIGRP stub.
Refer to the exhibit. All routers have Protocol Independent Multicast (PIM) enabled interfaces. On the basis of the configuration provided on routers R1 and R2, which router will take on the func tion of rendezvous point (RP) for the multicast network? （）A. both routers R1 and R2B. router R1C. router R2D. none of the routers since they are not configured with static RP
What is the IPv6 address FF02::2 used for?() A. all routers in a local segmentB. all routers in an autonomous systemC. all hosts in a local segmentD. all hosts in a particular multicast group
Which statement describes the rule of split horizon?（）A、Only routers can split boundaries (horizons) between concentric networks.B、All distance vector protocols require fall back routers that may cause momentary loops as the topology changes.C、Networks can only remain fully converged if all information about routers is sent out all active interfaces.D、Information about a route should not be sent back in the direction from which the original update come.E、Each AS must keep routing tables converged to prevent dead routes from being advertised across the AS boundary.
Which description regarding OSPF Network LSAs is correct?（）A、They are originated by Area Border Router and are sent into a single area to advertise an Autonomous System Border Router.B、They are originat ed by Area Border Routers and are sent into a single area to advertise destinations outside that area.C、They are originated by the DR on every multi - access network. They include all attached routers including the DR itself.D、They are originated by every router in the OPSF network. They include all routers on the link, interfaces, the cost of the link, and any known neighbor on the link.
A company has a Frame Relay WAN with one central - site router and 100 branch office routers. A partial mesh of PVCs exists: one PVC between the central site and each of t he 100 branch routers. All routers use point - to - point subinterfaces and one subnet per PVC. Which of the following is true about OSPF in this design?（）A、The central site router has 100 fully adjacent neighborships with the 100 branchesB、The central site router has neighborships with all branch routers, but fully adjacent neighbors with only two branchesC、The central site router has a neighborship with the Frame Relay switcHD、None of the other answers is correct
When verifying the OSPF link state database, which type of LSAs should you expect to see within the different OS PF area types?（）A、All OSPF routers in stubby areas can have type 3 LSAs in their database.B、All OSPF routers in stubby areas can have type 7 LSAs in their database.C、All OSPF routers in totally stubby areas can have type 3 LSAs in their database.D、All OSPF routers in totally stubby areas can have type 7 LSAs in their database.E、All OSPF routers in NSSA areas can have type 3 LSAs in their database.F、All OSPF routers in NSSA areas can have type 7 LSAs in their database.
Which of the following is true concerning Frame Relay multipoint subinterfaces?（）A、An IP address is required on the physical interface of the central router.B、All routers are required to be fully meshed.C、All routers must be in the same subnet to forward routing updates and broadcasts.D、Multipoint is the default configuration for Frame Relay subinterfaces.
Which two are characteristics of link-state routing protocols?（） (Choose two.)A、Routers choose a best path for a destination based on the SPF algorithm.B、All routers in a given area or level build a consistent database describing the network's topology.C、Routers choose the best path for a destination based on the interface on which they received the link stateadvertisement with the lowest cost.D、All routers in a given area or level forward link state advertisements between interfaces in the same area or level, adding their metric to the link state advertisement's cost information when they forward it.
With MPLS Fast Reroute, what is the "point of local repair"?（）A、egress routerB、ingress routerC、start of the bypass tunnelD、all routers in the bypass tunnel
Routers R1, R2, R3, and R4 connect to the same 10.10.10.0/24 LAN- based subnet. OSPF is fully working in the subnet. Later, R5, whose OSPF priority is higher than the other four routers, joins the subnet. Which of the following are true about the OSPF database exchange process over this subnet at this point?（）A、R5 will send its DD, LSR, and LSU packets to the 224.0.0.5 all - DR - routers multicast address.B、R5 will send its DD, LSR, and LSU pack ets to the 224.0.0.6 all - DR - routers multicast address.C、The DR will inform R5 about LSAs by sending its DD, LSR, and LSU packets to the 224.0.0.6 all- SPF - routers multicast address.D、The DR will inform R5 about LSAs by sending its DD, LSR, and LSU pa ckets to the 224.0.0.5 all- SPF - routers multicast address.
A medium-sized company has a Class C IP address. It has two Cisco routers and one non-Cisco router. All three routers are using RIP version 1. The company network is using the block of 198.133.219.0/24. The company has decided it would be a good idea to split the network into three smaller subnets and create the option of conserving addresses with VLSM. What is the best course of action if the company wants to have 40 hosts in each of the three subnets?（）A、Convert all the routers to EIGRP and use 198.133.219.32/27, 198.133.219.64/27, and 198.133.219.92/27 as the new subnetworks.B、Maintain the use of RIP version 1 and use 198.133.219.32/27, 198.133.219.64/27, and 133.219.92/27 as the new subnetworks.C、Convert all the routers to EIGRP and use 198.133.219.64/26, 198.133.219.128/26, and 133.219.192/26 as the new subnetworks.D、Convert all the routers to RIP version 2 and use 198.133.219.64/26, 198.133.219.128/26, and 133.219.192/26 as the new subnetworks.E、Convert all the routers to OSPF and use 198.133.219.16/28, 198.133.219.32/28, and 198.133.219.48/28 as the new subnetworks.F、Convert all the routers to static routes and use 198.133.219.16/28, 198.133.219.32/28, and
An etwork administrator has enabled OSPF across an NBMA network and has issued the command ip ospf network nonbroadcast. Given those facts, which two statements are true?（）A、Interfaces will automatically detect and build adjacencies with neighbor routersB、DR and BDR elections will not occurC、DR and BDR elections will occurD、The neighbor command is required to build adjacenciesE、All routers must be configured in a fully meshed topology with all other routers
The network consists of a series of routers that are all configured for IBGP. Which one of thefollowing IBGP characteristics is true？（）A、The IBGP routers must always be fully meshedB、The IBGP routers can be in a different ASC、The IBGP routers must be directly connectedD、The IBGP routers do not need to be directly connectedE、None of the other alternatives apply are true
What does a router do if it has no EIGRP feasible successor route to a destination network and the successor route to that destination network is inactive status?（）A、It routes all traffic that is addresses to the destination network to the interface indicates in the routing table.B、It sends a copy of its neighbor table to all adjacent routers.C、It sends a multicast query packet to all adjacent neighbors requesting available routing paths to the destination network.D、It broadcasts Hello packets to all routers in the network to re-establish neighbor adjacencies.
What is the IPv6 address FF02::2 used for?（）A、all routers in a local segmentB、all routers in an autonomous systemC、all hosts in a local segmentD、all hosts in a particular multicast group
Which of the following routing protocols involves all routers knowing the connections status ofother routers within the network?（）A、RIPv2B、OSPFC、IGRPD、BGP
Which routers must be configured with the same authentication string when configuring OSPFauthentication?（）A、all routers on a linkB、all routers in an areaC、all external OSPF peersD、all routers in an OSPF domain
Which routers must be configured with the same authentication string when configuring OSPF authentication？（）A、all routers on a linkB、all routers in an areaC、all external OSPF peersD、all routers in an OSPF domain
单选题A medium-sized company has a Class C IP address. It has two Cisco routers and one non-Cisco router. All three routers are using RIP version 1. The company network is using the block of 198.133.219.0/24. The company has decided it would be a good idea to split the network into three smaller subnets and create the option of conserving addresses with VLSM. What is the best course of action if the company wants to have 40 hosts in each of the three subnets?（）AConvert all the routers to EIGRP and use 198.133.219.32/27, 198.133.219.64/27, and 198.133.219.92/27 as the new subnetworks.BMaintain the use of RIP version 1 and use 198.133.219.32/27, 198.133.219.64/27, and 133.219.92/27 as the new subnetworks.CConvert all the routers to EIGRP and use 198.133.219.64/26, 198.133.219.128/26, and 133.219.192/26 as the new subnetworks.DConvert all the routers to RIP version 2 and use 198.133.219.64/26, 198.133.219.128/26, and 133.219.192/26 as the new subnetworks.EConvert all the routers to OSPF and use 198.133.219.16/28, 198.133.219.32/28, and 198.133.219.48/28 as the new subnetworks.FConvert all the routers to static routes and use 198.133.219.16/28, 198.133.219.32/28, and
单选题The network consists of a series of routers that are all configured for IBGP. Which one of thefollowing IBGP characteristics is true？（）AThe IBGP routers must always be fully meshedBThe IBGP routers can be in a different ASCThe IBGP routers must be directly connectedDThe IBGP routers do not need to be directly connectedENone of the other alternatives apply are true
单选题What does a router do if it has no EIGRP feasible successor route to a destination network and the successor route to that destination network is inactive status?（）AIt routes all traffic that is addresses to the destination network to the interface indicates in the routing table.BIt sends a copy of its neighbor table to all adjacent routers.CIt sends a multicast query packet to all adjacent neighbors requesting available routing paths to the destination network.DIt broadcasts Hello packets to all routers in the network to re-establish neighbor adjacencies.
单选题Which description regarding OSPF Network LSAs is correct?（）AThey are originated by Area Border Router and are sent into a single area to advertise an Autonomous System Border Router.BThey are originat ed by Area Border Routers and are sent into a single area to advertise destinations outside that area.CThey are originated by the DR on every multi - access network. They include all attached routers including the DR itself.DThey are originated by every router in the OPSF network. They include all routers on the link, interfaces, the cost of the link, and any known neighbor on the link.
多选题Ten routers, R1 through R10, connect in a partial mesh over Frame Relay. For the mesh, R1 and R2 have PVCs connected to all other routers, but Routers R3 through R10 act as branch routers, with only two PVCs - one to R1 and one to R2. The routers u se IP subnet 10.1.1.0/24, with addresses 10.1.1.1, 10.1.1.2, and so on, through 10.1.1.10, respectively. The routers all use Inverse ARP to learn Frame Relay mapping information. All routers use a multipoint subinterface with network type point - tomultip oint nonbroadcast. A co - worker's implementation plan lists lots of configuration commands related to this design. The design states that all hosts should be able to ping all other hosts. Which commands are required for proper functioning of OSPF in this case?（）Aframe - relay map commands on R3 - R10 referencing the other routers in this groupBNine OSPF neighbor commands on each routerCNine OSPF neighbor commands on R1 and R2, with only two such commands on R3 - R10DR1 and R2 with ip ospf prio rity 1 commands to ensure they become DR and BDRER3 - R10 with ip ospf priority 0 commands to ensure they do not become DR or BDR
多选题Which two statements are correct about Layer 2 broadcast frames?（）ALayer 2 broadcast frames are processed by all devices on the same VLANBLayer 2 broadcast frames are discarded by routers that connect to multiple VLANsCLayer 2 broadcast frames are relayed by routers to all connected VLANsDLayer 2 broadcast frames are relayed by switches to devices on the same VLAN
单选题A company has a Frame Relay WAN with one central - site router and 100 branch office routers. A partial mesh of PVCs exists: one PVC between the central site and each of t he 100 branch routers. All routers use point - to - point subinterfaces and one subnet per PVC. Which of the following is true about OSPF in this design?（）AThe central site router has 100 fully adjacent neighborships with the 100 branchesBThe central site router has neighborships with all branch routers, but fully adjacent neighbors with only two branchesCThe central site router has a neighborship with the Frame Relay switcHDNone of the other answers is correct