You are the network administrator for TestKing. The network contains a WindowsServer 2003 computer named testking1, which hosts a critical business applicationnamed Salesapp. Testking1 has one disk that contains a single NTFS volume.Five days ago, the System State of testking1 was backed up, and an AutomatedSystem Recovery (ASR) backup was created. No additional backups wereperformed. Subsequently, many changes were made to the Salesapp data files.You apply an update to the application, which requires you to restart testking1.Windows startup terminates with a Stop error. You restart the computer and bootto a floppy disk. A utility on this disk gives you read-only access to the NTFS filesystem. You discover that one of the .dll files for the Salesapp application iscorrupted. The corrupted file is stored in the C.\Windows\System32 folder.You need to restore the corrupted file. You need to avoid losing any changes madeto the data files on testking1.What should you do onTestKing1?（）
You are the network administrator for TestKing. The network contains a Windows
Server 2003 computer named testking1, which hosts a critical business application
named Salesapp. Testking1 has one disk that contains a single NTFS volume.
Five days ago, the System State of testking1 was backed up, and an Automated
System Recovery (ASR) backup was created. No additional backups were
performed. Subsequently, many changes were made to the Salesapp data files.
You apply an update to the application, which requires you to restart testking1.
Windows startup terminates with a Stop error. You restart the computer and boot
to a floppy disk. A utility on this disk gives you read-only access to the NTFS file
system. You discover that one of the .dll files for the Salesapp application is
corrupted. The corrupted file is stored in the C.\Windows\System32 folder.
You need to restore the corrupted file. You need to avoid losing any changes made
to the data files on testking1.
What should you do onTestKing1?（）
相关考题：
Your network contains a server named Server1 that runs Windows Server 2008 R2. The network contains multiple subnets.An administrator reports that Server1 fails to communicate with computers on remote subnets.You run route.exe print on Server1 as shown in the exhibit. (Click the Exhibit button.)You need to ensure that Server1 can communicate with all computers on the network.What should you do？（）A. Disable IPv6.B. Change the subnet mask.C. Add a default gateway address.D. Change the default metric to 100.
You are a network administrator for Ezonexam.com's Windows 2000 network.Your network has 200 Windows 2000 Professional computers and 15 Windows 2000 Server computers.Users on the network save their work files in home folders on a network server. The NTFS partition that contains the home folders has Encrypting File System (EFS) enabled. A user named Jack Bauer leaves the company. You grant her manager the Full Control NTFS permission to Jack's home folder. When the manager attempts to open any of the files, she receives the following error message: "Access is denied."What should you do?A．Use System File Checker (SFC) to decrypt the file.B．Log on the network as the Recovery Agent. Decrypt the files for the manager.C．Log on the network as the administrator. Use the cipher command to decrypt the files.D．Log on the network as a member of the Backup Operators group. Decrypt the files for the manager.
You are the network administrator for TestKing. All network servers run Windows Server 2003.A server named TestKing18 functions as a domain controller. You back up TestKing18 and generate a detailed backup log.You need to view the full backup log.What should you do?（）A. Run the ntbackup command with the /L option.B. Run the ntbackup command with the /F option.C. Open the Backup utility. On the Tools menu, click Report.D. Open Event Viewer. In the application log, view Ntbackup events
You are the network administrator at TestKing. You need to perform password recovery on Router TK1. What must you modify in the password recovery process?() A. Configuration registerB. NVRAMC. Boot flashD. CMOSE. Flash
You are the network administrator at TestKing. TestKing has been assigned the class C IP address 189.66.1.0 by its Internet Service Provider. If you divide the network range by using the 255.255.255.224 subnet mask, how many hosts can be supported on each network?（）A.14B.16C.30D.32E.62F.64
You are an administrator of a switched network and your goal is to reduce some of the administrative overhead on your network. You plan on achieving this by configuring a new VLAN for each department in your network. However, you need to share the VLAN information across numerous switches throughout your network. Which of the following would allow you accomplish this?（）A、STPB、GVRPC、SNMPD、VTPE、DHCP
You are the network administrator at TestKing. TestKing has been assigned the class C IP address 189.66.1.0 by its Internet Service Provider. If you divide the network range by using the 255.255.255.224 subnet mask, how many hosts can be supported on each network?（）A、14B、16C、30D、32E、62F、64
You are the network administrator at TestKing. You need to perform password recovery on Router TK1. What must you modify in the password recovery process?（）A、Configuration registerB、NVRAMC、Boot flashD、CMOSE、Flash
You are the network administrator for passguide.com. Which device will you install in your computer to make wireless connections you and a network?（）A、RepeaterB、Wireless routerC、HubD、Wireless network adapter
Your network contains an internal network and a perimeter network that are separated by a firewall. The perimeter network contains an Exchange Server 2010 Edge Transport server. You plan to deploy an internal Exchange Server 2010 organization that meets the following requirements：.Support EdgeSync synchronization .Support encrypted delivery of outbound e-mail messages to the Edge Transport server .Minimize the attack surface of the internal network Which TCP ports should you allow from the internal network to the perimeter network？（）A、3389 and 25B、3389 and 636C、50636 and 25D、50636 and 135
You are the network administrator for your company. The network consists of a single Active Directory domain. All computers on the network are members of the domain. You administer a Network Load Balancing cluster that consists of three nodes. Each node runs Windows Server 2003 and contains a single network adapter. The Network Load Balancing cluster can run only in unicast mode. The Network Load Balancing cluster has converged successfully. To increase the utilization of the cluster， you decide to move a particular application to each node of the cluster. For this application to run， you must add a Network Load Balancing port rule to the nodes of the cluster. You start Network Load Balancing Manager on the second node of the cluster. However， Network Load Balancing Manager displays a message that it cannot communicate with the other two nodes of the cluster. You want to add the port rule to the nodes of the cluster. What should you do？ （）A、 Use Network Load Balancing Manager on the Network Load Balancing default host to add the port rule.B、 Change the host priority of the second node to be the highest in the cluster， and then use Network Load Balancing Manager to add the port rule.C、 Run the nlb.exe drain command on each node， and then use Network Load Balancing Manager to add the port rule.D、 Add the port rule through Network Connections Properties on each node.
You are a network administrator for your company. The network contains a perimeter network. The perimeter network contains four Windows Server 2003， Web Edition computers that are configured as a Network Load Balancing cluster. The cluster hosts an e-commerce Web site that must be available 24 hours per day. The cluster is located in a physically secure data center and uses an Internet-addressable virtual IP address. All servers in the cluster are configured with the Hisecws.inf template. You need to implement protective measures against the cluster’s most significant security vulnerability. What should you do？ （）A、 Use Encrypting File System （EFS） for all files that contain confidential data stored on the cluster.B、 Use packet filtering on all inbound traffic to the cluster.C、 Use Security Configuration and Analysis regularly to compare the security settings on all servers in the cluster with the baseline settings.D、 Use intrusion detection on the perimeter network.
You are the desktop administrator for one of your company's branch offices. The network in the branch office consists of a single network segment, which contains a domain controller, a DHCP server, 10 Windows 2000 Server computers, and 50 Windows 2000 Professional computers. All servers and client computers are members of the company's Active Directory domain. You purchase 50 new client computers for the branch office. Each new client computer contains a built-in PXE-compliant network adapter. You install and configure RIS on one of the Windows 2000 Server computers that is on the network in the branch office. You create a Windows XP Professional RIS image on the Windows 2000 Server computer. You connect the new client computers to the network in the office, and you turn on each computer. Each computer displays a message stating that it cannot contact a PXE boot server. You verify that the RIS server is connected to the network. You need to ensure that the new client computers can connect to the RIS server and can begin installing Windows XP Professional. What should you do?（）A、Ask a domain administrator to authorize the RIS server. B、Grant the Everyone group Allow - Read NTFS permission on the RIS image.C、Install RIS on the domain controller. Copy the RIS image to the domain controller.D、Add a reservation for the RIS server to the DHCP server.
You are the network administrator for ExamSheet.net. You install Windows 2000 Professional on your portable computer. You use a docking station for your portable computer when you are in the office. You install a ISA-based network adapter in your docking station. You insert your computer into the docking station and start the computer. The network adapter is not detected during the startup process. You obtain a disk that contains the supported driver from the network adapter manufacturer. You want to allow Windows 2000 Professional to use the network adapter. What should you do?（）A、Restart the computer in the docking station.B、Run the Add/Remove Hardware wizard.C、Use Device Manager to scan for hardware changes.D、Copy the network adapter driver to the Winnt/Driver Cache/i386 folder.E、Install the new network adapter driver.
You are the network administrator for The network consists of a single Active Directory domain named All network servers run Windows Server 2003. The domain contains three domain controllers: DC1, DC2, and DC3. Each one hosts user data. DC1 experiences hard disk failure. You need to temporary restore the user data to DC2. Which type of restoration should you perform?（）A、Automated System Recovery (ASR)B、NormalC、PrimaryD、Authoritative
You work as a network administrator at ABC.com. The ABC.com network consists of a single domain named ABC.com. All servers on the ABC.com network have Windows Server 2012 R2 installed.The ABC.com network contains a network attached printer named HPNet01.You share HPNet01 from a server named ABC_SR02 and publish the printer in Active Directory. How would you ensure that members of a group named PrinterAdmin can manage HPNet01？（）A、You should enable Branch Office Direct Printing.B、You should configure the Printer defaults.C、You should share HPNet01 from a domain controller.D、You should configure the Security settings.
You are the network administrator for your company. The network consists of a single Active Directory domain. The network contains an application server running Windows Server 2003. Users report intermittent slow performance when they access the application server throughout the day. You find out that the network interface on the application server is being heavily used during the periods of slow performance. You suspect that a single computer is causing the problem.You need to create a plan to identify the problem computer. What should you do？（）A、 Monitor the performance monitor counters on the application server by using System Monitor. B、 Monitor the network traffic on the application server by using Network Monitor.C、 Monitor network statistics on the application server by using Task Manager.D、 Run network diagnostics on the application server by using Network Diagnostics.
单选题You are the network administrator for your company. The network consists of a single Active Directory domain. All network servers run Windows Server 2003. The domain contains three domain controllers: DC1, DC2, and DC3. Each one hosts user data. DC1 experiences hard disk failure. You need to temporarily restore the user data to DC2. Which type of restoration should you perform? （）AAutomated System Recovery (ASR)BnormalCprimaryDauthoritative
多选题You are the network administrator at TestKing. You need to perform password recovery on Router TK1. What must you modify in the password recovery process?（）AConfiguration registerBNVRAMCBoot flashDCMOSEFlash
单选题You are the network administrator for your company. The network consists of a single Active Directory domain. The domain contains Windows Server 2003 computers and Windows XP Professional computers. You configure a server named Server1 to be a file server. The written company security policy states that you must analyze network traffic that is sent to and from all file servers.You need to capture file-transfer network traffic that is being sent to and from Server1. You install Network Monitor Tools from a Windows Server 2003 product CD-ROM on a server named Server2， which is on the same network segment as Server1.You run Network Monitor on Server2. However， Network Monitor captures only network traffic that is sent to and from Server2. You need to capture all network traffic that is sent to and from Server1. What should you do？（）AInstall the Network Monitor driver on Server1. Run Network Monitor on Server2 to capture network traffic.BOpen Network Monitor on Server2 and create a capture filter to enable the capture of all protocols. Run Network Monitor to capture network traffic.CInstall Network Monitor Tools on Server1. Run Network Monitor to capture network traffic.DOpen Network Monitor on Server2 and increase the capture buffer from 1 MB to 20 MB in size. Run Network Monitor to capture network traffic.
单选题You are an administrator of a switched network and your goal is to reduce some of the administrative overhead on your network. You plan on achieving this by configuring a new VLAN for each department in your network. However, you need to share the VLAN information across numerous switches throughout your network. Which of the following would allow you accomplish this?（）ASTPBGVRPCSNMPDVTPEDHCP
单选题You are the network administrator at TestKing. TestKing has been assigned the class C IP address 189.66.1.0 by its Internet Service Provider. If you divide the network range by using the 255.255.255.224 subnet mask, how many hosts can be supported on each network?（）A14B16C30D32E62F64
单选题You are the network administrator for . The network consists of a single Active Directory domain. All domain controllers run Windows Server 2003, and all client computers run Windows XP Professional. TestKing acquires a subsidiary. You receive a comma delimited file that contains the names of all user accounts at the subsidiary. You need to import these accounts into your domain. Which command should you use?（）AldifdeBcsvdeCntdsutil with the authoritative restore optionDdsadd user
单选题You are using Windows 2000 Professional on your desktop computer. You are working on the company’s financial report and you want other users on the network to able to modify your documents for the report. You want users to share the financial report folder on the network. Because the network contains confidential information you want to prevent users from the enabling off line access for the network share that contains the financial report. What should you do？（）AUse Windows Explorer to receive the offline filesBUsing the Windows Explorer, disable the cache for the reports on the network shareCUse the Windows NT explorer to grant the special access for the reports on the network shareDUse the synchronization manager to configure synchronization not to occur when users are connected to the LAN connection.
单选题You are the network administrator for TestKing. The network contains a Windows Server 2003 computer named testking1, which hosts a critical business application named Salesapp. Testking1 has one disk that contains a single NTFS volume. Five days ago, the System State of testking1 was backed up, and an Automated System Recovery (ASR) backup was created. No additional backups were performed. Subsequently, many changes were made to the Salesapp data files. You apply an update to the application, which requires you to restart testking1. Windows startup terminates with a Stop error. You restart the computer and boot to a floppy disk. A utility on this disk gives you read-only access to the NTFS file system. You discover that one of the .dll files for the Salesapp application is corrupted. The corrupted file is stored in the C./Windows/System32 folder. You need to restore the corrupted file. You need to avoid losing any changes made to the data files on testking1. What should you do onTestKing1?（）APerform the ASR restore procedure.BRestart Windows by using the Last Known Good configuration option.CStart the Recovery Console and replace the corrupted .dll file with a copy from the Salesapp CD-ROM.DReinstall Windows Server 2003. Do not format any volumes.
单选题You are the network administrator for your company. The network consists of a single Active Directory domain. The network contains Windows Server 2003 file servers. The network also contains a Windows Server 2003 computer named Server1 that runs Routing and Remote Access and Internet Authentication Service （IAS）. Server1 provides VPN access to the network for users’ home computers. You suspect that an external unauthorized user is attempting to access the network through Server1. You want to log the details of access attempts by VPN users when they attempt to access the network. You want to compare the IP addresses of users’ home computers with the IP addresses used in the access attempts to verify that the users are authorized. You need to configure Server1 to log the details of access attempts by VPN users. What should you do？ （）A Configure the system event log to Do not overwrite.B In IAS， in Remote Access Logging， enable the Authentication requests setting.C Configure the Remote Access server to Log all events.D Create a custom remote access policy and configure it for Authentication-Type.
单选题You are the network administrator at TestKing. TestKing has been provided withthe network address 165.100.27.0/24. The TestKing CEO wants to know how many subnetworks this address provides, and how many hosts can be supported on each subnet. What would your reply be?（）AOne network with 254 hosts.B254 networks with 254 hosts per network.C65,534 networks with 255 hosts per network.D30 networks with 64 hosts per network.E254 networks with 65,534 per network.