You are designing a site topology for the new Active Directory environment. What should you do?（）A、Create one site for all offices. Place the subnets for the four branch offices and the Sydney main office in this site. B、Create two sites: one site for the four branch offices and one site for the Sydney main office. Place the subnets for the branch offices in one site. Place the subnet for the Sydney main office in the other site. C、Create three sites: one site for the four branch offices, one site for the Sydney main office, and one site for the Sydney satellite offices. D、Create four sites: one for the Melbourne and Perth branch offices, one site for the Berlin and Paris branch offices, one site for the Sydney main office, and one site for the Sydney satellite offices. E、Create five sites; one site for the Melbourne branch office, one site for the Perth branch office, one site for the Berlin branch office, one site for the Paris branch office, and one site for the Sydney main office. Place the subnets for each branch office and the Sydney main office in their respective sites.
You are designing a site topology for the new Active Directory environment. What should you do?（）
- A、Create one site for all offices. Place the subnets for the four branch offices and the Sydney main office in this site.
- B、Create two sites: one site for the four branch offices and one site for the Sydney main office. Place the subnets for the branch offices in one site. Place the subnet for the Sydney main office in the other site.
- C、Create three sites: one site for the four branch offices, one site for the Sydney main office, and one site for the Sydney satellite offices.
- D、Create four sites: one for the Melbourne and Perth branch offices, one site for the Berlin and Paris branch offices, one site for the Sydney main office, and one site for the Sydney satellite offices.
- E、Create five sites; one site for the Melbourne branch office, one site for the Perth branch office, one site for the Berlin branch office, one site for the Paris branch office, and one site for the Sydney main office. Place the subnets for each branch office and the Sydney main office in their respective sites.
相关考题：
Your company has a main office and 10 branch offices. Each office connects to the Internet by using a direct link. The main office connects to the branch offices by using a WAN link. You plan to deploy Exchange Server 2010 servers in each office. You need to design Active Directory to meet the following Exchange Server 2010 requirements：.Users must be able to access their mailboxes if a single domain controller fails .Users must be able to send e-mail messages to the Internet if a WAN link fails What should you include in the design？（）A、Create an Active Directory site for each office. Deploy two global catalog servers in each site.B、Create an Active Directory site for each office. Deploy a single domain controller in each site，and then enable site link bridging.C、Create an Active Directory site for all of the offices. Deploy a global catalog server and a read-only domain controller in each site.D、Create an Active Directory site for all of the offices. Deploy a global catalog server and two read- only global catalog servers in each Active Directory site.
Your company has a main office and a branch office. You discover that when you disable IPv4 on a computer in the branch office， the computer authenticates by using a domain controller in the main office. You need to ensure that IPv6-only computers authenticate to domain controllers in the same site. What should you do（）A、Configure the NTDS Site Settings object.B、Create Active Directory subnet objects.C、Create Active Directory Domain Services connection objects.D、Install an Intra-Site Automatic Tunnel Addressing Protocol （ISATAP） router.
You are designing an Active Directory site infrastructure to meet the bussiness and technical requirements. What should you do?（）A、Create one site for each office and each local bank.B、Create one site for all offices. Create one site for all local banks.C、Create one site for Amsterdam. Create one site for all branch office and all local banks.D、Create one site for Amsterdam. Create one site for the Utercht brach office. Create one site for that Hague branch office. Place half the local banks in the utercht site and half the local banks in the Hague site.E、Create one site for Amsterdam. Create one site for the Utercht brach office. Create one site for each local bank that has more than 50 users. Place all the other local banks in the Amsterdam Site.
You have an existing Active Directory site named Site1. You create a new Active Directory site and name it Site2. You need to configure Active Directory replication between Site1 and Site2. You install a new domain controller. You create the site link between Site1 and Site2. What should you do next（）A、Use the Active Directory Sites and Services console to configure a new site link bridge object.B、Use the Active Directory Sites and Services console to decrease the site link cost between Site1 and Site2.C、Use the Active Directory Sites and Services console to assign a new IP subnet to Site2. Move the new domain contD、Use the Active Directory Sites and Services console to configure the new domain controller as a preferred bridgehe
Your network contains an Active Directory forest. The forest contains one domain and three sites. Each site contains two domain controllers. All domain controllers are DNS servers. You create a new Active Directory-integrated zone. You need to ensure that the new zone is replicated to the domain controllers in only one of the sites. What should you do first（）A、Modify the NTDS Site Settings object for the site.B、Modify the replication settings of the default site link.C、Create an Active Directory connection object.D、Create an Active Directory application directory partition.
Your company has a main office and 20 branch offices.Each office contains an Exchange Server 2010 Mailbox server and an Exchange Server 2010 Hub Transport server. Each office is configured as a separate Active Directory site.Each branch office site has one IP site link that connects to the main office site.You need to ensure that e-mail sent between offices is routed through the Hub Transport servers in the main office. What should you do？（）A、From the Exchange Management Shell， modify the Exchange-specific site link costs.B、From the Exchange Management Shell， configure the main office site as a hub site.C、From Active Directory Sites and Services， modify the site link costs.D、From Active Directory Sites and Services， remove all IP site links and then create new SMTP site links.
You are designing a site topology for the new Active Directory environment. What should you do？ （）A、 Create one site for all offices. Place the subnets for the four branch offices and the Sydney main office in this site.B、 Create two sites： one site for the four branch offices and one site for the Sydney main office. Place the subnets for the branch offices in one site. Place the subnet for the Sydney main office in the other site.C、 Create three sites： one site for the four branch offices， one site for the Sydney main office， and one site for the Sydney satellite offices.D、 Create four sites： one for the Melbourne and Perth branch offices， one site for the Berlin and Paris branch offices， one site for the Sydney main office， and one site for the Sydney satellite offices.E、 Create five sites； one site for the Melbourne branch office， one site for the Perth branch office， one site for the Berlin branch office， one site for the Paris branch office， and one site for the Sydney main office. Place the subnets for each branch office and the Sydney main office in their respective sites.
Your company has a main office and a branch office. The main office contains two domain controllers. You create an Active Directory site named BranchOfficeSite. You deploy a domain controller in the branch office， and then add the domain controller to the BranchOfficeSite site. You discover that users in the branch office are randomly authenticated by either the domain controller in the branch office or the domain controllers in the main office. You need to ensure that the users in the branch office always attempt to authenticate to the domain controller in the branch office first. What should you do（）A、Create organizational units （OUs）.B、Create Active Directory subnet objects.C、Modify the slow link detection threshold.D、Modify the Location attribute of the computer objects.
Your company has a main office and 10 branch offices. Each office has a direct link to the Internet. Each branch office has a WAN link that connects to the main office. Your network consists of an Active Directory forest. Each office is configured as an Active Directory site. You plan to deploy an Exchange Server 2010 Hub Transport server in each site. You need to design a message routing solution to meet the following requirements： .Branch office connections to the Internet must be used to deliver e-mail .Branch office servers must use the WAN link to the main office to deliver e-mail to other branch offices.Branch office servers must be prevented from sending e-mail to the Internet by using the WAN link to themain office .The solution must minimize administrative overhead What should you include in the solution？（）A、one Send connector for each siteB、one SMTP site link for each siteC、two Send connectors for each siteD、10 Send connectors for each site
Your company has a main office and 50 branch offices. Each office is configured as an Active Directory site. Each branch office site contains a domain controller. The main office site contains all the global catalog servers in the forest. Each branch office contains a WAN link that connects to the main office. You need to plan the deployment of new Mailbox servers to meet the following requirements： .Ensure that users in the branch offices can access their mailboxes if their local domain controller fails .Deploy the minimum number of Exchange servers What should you include in the plan？（）A、One Mailbox server in each office and global catalog servers in each branch officeB、One Mailbox server in each office and Universal Group Membership Caching in each branch officeC、One Mailbox server in each branch office onlyD、Multiple Mailbox servers in the main office only
You have a main office and five branch offices. The offices connect to each other by using a WAN link. An Active Directory site exists for each office. Each site has a separate IP site link to all other sites. The main office site is configured as a hub site. You have an Exchange Server 2010 organization. You discover that messages sent between offices are not routed through the Hub Transport servers in themain office. You need to ensure that all messages sent between offices are routed through the Hub Transport serversin the main office. What should you do？（）A、Change all IP site links to SMTP site links.B、Modify the Exchange-specific cost for each site link.C、From the Hub Transport servers in each site， create a journal rule.D、From the Hub Transport servers in each site， create a transport rule.
Your company has offices in Toronto and Chicago. Both offices belong to an Active Directory directory service site named Site1. There is only one domain controller in Site1. Users in the Chicago office are experiencing slow logon times. You create a new Active Directory site for the Chicago office named Site2. You promote a new domain controller and create a site link between Site1 and Site2. You need to improve logon times for the Chicago users and enable Active Directory replication between the Site1 and Site2 domain controllers. Which two actions should you perform？（）A、 Designate the new domain controller as a preferred bridgehead server for Site1.B、 Create a subnet object and associate it with Site2.C、 Place the new domain controller in Site2.D、 Configure a new site link bridge object.
You have an Exchange Server 2010 organization that contains three Mailbox servers.All Mailbox servers are members of a database availability group （DAG） and have a public folder database.The Active Directory forest contains one site.You create a new site and install new Exchange Server 2010 servers in the site.You need to ensure that public folders are stored on servers in both sites.What should you do？（）A、Create a public folder database on a server in the new site. Modify the replication settings for all public foldersB、Create a public folder database on a server in the new site.Run the Set-DatabaseAvailabilityGroup cmdlet from a server in the new siteC、Configure clustered continuous replication （CCR） on two servers in the new site. Modify the replication settings for all public folder databasesD、Configure standby continuous replication （SCR） on a server in the new site. Run the Enable-StorageGroupCopy cmdlet from a server in the new site
Your company has a main office and 40 branch offices. Each branch office is configured as a separate Active Directory site that has a dedicated read-only domain controller （RODC）. An RODC server is stolen from one of the branch offices. You need to identify the user accounts that were cached on the stolen RODC server. Which utility should you use（）A、Dsmod.exeB、Ntdsutil.exeC、Active Directory Sites and ServicesD、Active Directory Users and Computers
Your company has a main office and three branch offices. The network consists of a single Active Directory domain. Each office contains an Active Directory domain controller. You need to create a DNS infrastructure for the network that meets the following requirements： èThe DNS infrastructure must allow the client computers in each office to register DNS names within their. respective offices. èThe client computers must be able to resolve names for hosts in all offices. What should you do？（）A、Create an Active Directory-integrated zone at the main office site.B、Create a standard primary zone at the main office site and at each branch office site.C、Create a standard primary zone at the main office site. Create a secondary zone at each branch office site.D、Create a standard primary zone at the main office site. Create an Active Directory-integrated stub zone at each branch office site.
You work as the enterprise exchange administrator at Company.com.The Company.com network consists of a single Active Directory domain named Company.com.Company.com has an Exchange Server 2010 organization.Company.com has headquarters in London and branch offices around the globe.the branch offices of.com are linked to the London offices with one ip site link.all offices of .com is configured as a separate active directory site.all the active directory site of Company.com contains an exchange server 2010 mailbox server and an exchange server 2010 hub transport server.you have received instructions from the cio to make sure that the e- mail sent between the active directory sites is routed through the hubtransport servers in the London offices. What should you do？（）A、The best option is to change the Exchange-specific site link costs by using the Exchange Management Shell.B、The best option is to change the site link costs by using the Active Directory Sites and Services.C、The best option is to get rid of the IP site links and create new SMTP site links by using the Active Directory Sites and Services.D、The best option is to setting up the main office site as a hub site by using the Exchange Management Shell.
Your company has a single Active Directory directory service forest with multiple domains. The company has a main office with 1，000 users and a single branch office with 500 users. Each office is aseparate Active Directory site. The main office Active Directory site has two domain controllers with Global Catalog services. Company employees must be able to work in both offices. You need to plan the placement and configuration of domain controllers. What should you do？（）A、 Deploy two additional domain controllers in the main office Active Directory site.B、 Deploy global catalog servers in the branch office Active Directory site.C、 Enable change notification on the site link between the main office Active Directory site and the branch office Active Directory site.D、 Disable change notification on the site link between the main office Active Directory site and the branch office Active Directory site.
单选题Your company has a main office and 20 branch offices.Each office contains an Exchange Server 2010 Mailbox server and an Exchange Server 2010 Hub Transport server. Each office is configured as a separate Active Directory site.Each branch office site has one IP site link that connects to the main office site.You need to ensure that e-mail sent between offices is routed through the Hub Transport servers in the main office. What should you do？（）AFrom the Exchange Management Shell， modify the Exchange-specific site link costs.BFrom the Exchange Management Shell， configure the main office site as a hub site.CFrom Active Directory Sites and Services， modify the site link costs.DFrom Active Directory Sites and Services， remove all IP site links and then create new SMTP site links.
单选题You are designing an Active Directory site infrastructure to meet the bussiness and technical requirements. What should you do?（）ACreate one site for each office and each local bank.BCreate one site for all offices. Create one site for all local banks.CCreate one site for Amsterdam. Create one site for all branch office and all local banks.DCreate one site for Amsterdam. Create one site for the Utercht brach office. Create one site for that Hague branch office. Place half the local banks in the utercht site and half the local banks in the Hague site.ECreate one site for Amsterdam. Create one site for the Utercht brach office. Create one site for each local bank that has more than 50 users. Place all the other local banks in the Amsterdam Site.
单选题You are designing a site topology for the new Active Directory environment. What should you do?（）ACreate one site for all offices. Place the subnets for the four branch offices and the Sydney main office in this site. BCreate two sites: one site for the four branch offices and one site for the Sydney main office. Place the subnets for the branch offices in one site. Place the subnet for the Sydney main office in the other site. CCreate three sites: one site for the four branch offices, one site for the Sydney main office, and one site for the Sydney satellite offices. DCreate four sites: one for the Melbourne and Perth branch offices, one site for the Berlin and Paris branch offices, one site for the Sydney main office, and one site for the Sydney satellite offices. ECreate five sites; one site for the Melbourne branch office, one site for the Perth branch office, one site for the Berlin branch office, one site for the Paris branch office, and one site for the Sydney main office. Place the subnets for each branch office and the Sydney main office in their respective sites.
单选题You have a main office and five branch offices. The offices connect to each other by using a WAN link. An Active Directory site exists for each office. Each site has a separate IP site link to all other sites. The main office site is configured as a hub site. You have an Exchange Server 2010 organization. You discover that messages sent between offices are not routed through the Hub Transport servers in themain office. You need to ensure that all messages sent between offices are routed through the Hub Transport serversin the main office. What should you do？（）AChange all IP site links to SMTP site links.BModify the Exchange-specific cost for each site link.CFrom the Hub Transport servers in each site， create a journal rule.DFrom the Hub Transport servers in each site， create a transport rule.
单选题Your company has a main office and three branch offices. The network consists of a single Active Directory domain. Each office contains an Active Directory domain controller. You need to create a DNS infrastructure for the network that meets the following requirements： èThe DNS infrastructure must allow the client computers in each office to register DNS names within their. respective offices. èThe client computers must be able to resolve names for hosts in all offices. What should you do？（）ACreate an Active Directory-integrated zone at the main office site.BCreate a standard primary zone at the main office site and at each branch office site.CCreate a standard primary zone at the main office site. Create a secondary zone at each branch office site.DCreate a standard primary zone at the main office site. Create an Active Directory-integrated stub zone at each branch office site.
单选题You work as the enterprise exchange administrator at Company.com.The Company.com network consists of a single Active Directory domain named Company.com.Company.com has an Exchange Server 2010 organization.Company.com has headquarters in London and branch offices around the globe.the branch offices of.com are linked to the London offices with one ip site link.all offices of .com is configured as a separate active directory site.all the active directory site of Company.com contains an exchange server 2010 mailbox server and an exchange server 2010 hub transport server.you have received instructions from the cio to make sure that the e- mail sent between the active directory sites is routed through the hubtransport servers in the London offices. What should you do？（）AThe best option is to change the Exchange-specific site link costs by using the Exchange Management Shell.BThe best option is to change the site link costs by using the Active Directory Sites and Services.CThe best option is to get rid of the IP site links and create new SMTP site links by using the Active Directory Sites and Services.DThe best option is to setting up the main office site as a hub site by using the Exchange Management Shell.
单选题Your network contains an Active Directory forest. The forest contains one domain and three sites. Each site contains two domain controllers. All domain controllers are DNS servers. You create a new Active Directory-integrated zone. You need to ensure that the new zone is replicated to the domain controllers in only one of the sites. What should you do first（）AModify the NTDS Site Settings object for the site.BModify the replication settings of the default site link.CCreate an Active Directory connection object.DCreate an Active Directory application directory partition.
单选题You have an existing Active Directory site named Site1. You create a new Active Directory site and name it Site2. You need to configure Active Directory replication between Site1 and Site2. You install a new domain controller. You create the site link between Site1 and Site2. What should you do next（）AUse the Active Directory Sites and Services console to configure a new site link bridge object.BUse the Active Directory Sites and Services console to decrease the site link cost between Site1 and Site2.CUse the Active Directory Sites and Services console to assign a new IP subnet to Site2. Move the new domain contDUse the Active Directory Sites and Services console to configure the new domain controller as a preferred bridgehe
单选题Your company has a main office and 10 branch offices. Each office connects to the Internet by using a direct link. The main office connects to the branch offices by using a WAN link. You plan to deploy Exchange Server 2010 servers in each office. You need to design Active Directory to meet the following Exchange Server 2010 requirements： .Users must be able to access their mailboxes if a single domain controller fails .Users must be able to send e-mail messages to the Internet if a WAN link fails What should you include in the design？（）ACreate an Active Directory site for each office. Deploy two global catalog servers in each site.BCreate an Active Directory site for each office. Deploy a single domain controller in each site，and then enable site link bridging.CCreate an Active Directory site for all of the offices. Deploy a global catalog server and a read-only domain controller in each site.DCreate an Active Directory site for all of the offices. Deploy a global catalog server and two read- only global catalog servers in each Active Directory site.
单选题You are designing an Active Directory site infrastructure to meet the bussiness and technical requirements. What should you do？ （）A Create one site for each office and each local bank.B Create one site for all offices. Create one site for all local banks.C Create one site for Amsterdam. Create one site for all branch office and all local banks.D Create one site for Amsterdam. Create one site for the Utercht brach office. Create one site for that Hague branch office. Place half the local banks in the utercht site and half the local banks in the Hague site.E Create one site for Amsterdam. Create one site for the Utercht brach office. Create one site for each local bank that has more than 50 users. Place all the other local banks in the Amsterdam Site.