Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). You restore the system state on a member server. You attempt to log on to the server and receive the following error message: “The system cannot log you on to this domain because the system’s computer account in its primary domain is missing or the password on that account is incorrect.” You need to ensure that you can successfully log on to the domain from the server. What should you do on the server? （）A、Modify the password policy.B、Run the Dsrm.exe command.C、Restart the Netlogon service.D、Run the Netdom.exe reset command.
Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). You restore the system state on a member server. You attempt to log on to the server and receive the following error message: “The system cannot log you on to this domain because the system’s computer account in its primary domain is missing or the password on that account is incorrect.” You need to ensure that you can successfully log on to the domain from the server. What should you do on the server? （）
- A、Modify the password policy.
- B、Run the Dsrm.exe command.
- C、Restart the Netlogon service.
- D、Run the Netdom.exe reset command.
相关考题：
Your network consists of a single Active Directory domain. All network servers run Windows Server 2003Service Pack 2 (SP2).A server hard disk drive fails. You replace and configure the hard disk drive and use Windows Backup to start a data restore.When you start the restore, you receive the following error message.You need to restore the data on the server. The solution must create the same directory structure that existed beforethe disk failure.What should you do? （）A. Catalog the backup file.B. Restore the backup to a single folder.C. Restore the files to the original location.D. Restore the backup to an alternate location.
Your network consists of a single Active Directory domain. You have a domain controller named Server1 that runs Windows Server 2003 Service Pack 2 (SP2).You have a user account named BackupAdmin. BackupAdmin is a member of only the Backup Operators group.You log on to Server1 by using the BackupAdmin account.From Windows Backup, you attempt to restore a file from a backup file named D:\backup.bkf and receive the following message.You need to ensure that you can restore files from the backup file.What should you do? （）A. Log on to Server1 by using the Administrator account.B. Assign BackupAdmin ownership of D:\backup.bkf.C. Assign BackupAdmin the Restore files and directories user right.D. Assign BackupAdmin the Full Control NTFS permission for D:\backup.bkf.
Your network consists of a single Active Directory domain. You have a domain controller named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). The DNS service is installed on Server1. Server1 contains only Active Directory-integrated zones. Zone transfers are disabled for all zones. You need to back up the DNS zones on Server1. What should you do?（）A、From a command prompt， run Nslookup.exe.B、From Windows Backup， back up the system state.C、From Windows Backup， back up %SystemRoot%/System32/DNS.D、From the DNS snap-in， right-click Server1andthenclickExportList.
Your network consists of a single Active Directory domain. You have a DHCP server named DHCP1 that runs Windows Server 2003 Service Pack 2 (SP2).All client computers run Windows XP Service Pack 3 (SP3). All client computers are configured as DHCP clients.You change the IP address on DHCP1.Users report that they cannot connect to the network. You verify that the client computers do not receive an IP address configuration from DHCP1. You need to ensure that the client computers receive an IP address configuration from DHCP1. What should you do on DHCP1?（） A、Authorize the server. B、Reconcile the scope. C、Enable conflict resolution. D、Restore the server configuration by using the DHCP snap-in.
Your network consists of a single Active Directory domain. You have a member server that runs Windows Server 2003 Service Pack 2 (SP2). Your need to manage domain user accounts from the member server. What should you do? （）A、Install Windows Support Tools, and then run lusrmgr.msc.B、Run control userpasswords2. Use the advanced user management option.C、Run mmc.exe and then add the Active Directory Users and Computers snap-in.D、Install the Management and Monitoring Tools components, and then run compmgmt.msc.
Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 （SP2）.You need to ensure that computers can receive IP configurations from the DHCP server. What should you do？（）A、Add a scope option.B、Add a server option.C、Authorize the DHCP server.D、Reconcile the DHCP scope.
our network consists of a single Active Directory domain. The network contains two servers named Server1 and Server2 that run Windows Server 2003 Service Pack 2 (SP2). You log on to Server1 by using the Administrator account for the domain. You open Event Viewer and attempt to connect to Server2 but receive the following error message. You verify that you can connect to Server2 by using Windows Explorer and that Windows Firewall is disabled on Server2.You open the Services snap-in on Server2 as shown in the exhibit. (Click the Exhibit button.)，You need to ensure that you can connect to Server2 remotely by using Event Viewer. What should you do on Server2?（）A、 Add the Administrator account to the HelpServicesGroup. B、 Set the Startup Type for the Remote Registry service to Automatic and then start the service. C、 Set the Startup Type for the Secondary Logon service to Disabled and then stop the service. D、 Set the Startup Type for the Special Administration Console Helper service to Automatic and then start the service.
Your network consists of a single Active Directory domain named contoso.com. DNS was installed during the installation of Active Directory. All servers run Windows Server 2003 Service Pack 2 (SP2).On a member server in the domain, you run Nslookup and receive the following error message.You need to ensure that the Nslookup query completes successfully on the member server. What should you do?（） A、Enable zone transfers for the contoso.com zone. B、Configure a reverse lookup zone for the 10.10.0 subnet. C、Enable secure and nonsecure updates to the contoso.com zone. D、Add the member server to the access control list (ACL) for the contoso.com zone.
Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 （SP2）.A firewall separates the internal network from the Internet. The firewall blocks all outbound traffic except for HTTP and SMTP traffic.You install a DNS server. The DNS server is configured to use the default root hints. You need to ensure that the DNS server can resolve the host names on the Internet. Which port should you open on the firewall？（）A、53B、135C、500D、3389
Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2).You have two servers named Server1 and Server2. Both servers have Windows Server Update Services (WSUS) 3.0 installed.You need to configure WSUS so that Server2 uses Server1 as the upstream server. What should you do on Server2?（）A、From the command prompt, run wuauclt.exe. B、From the command prompt, run wsusutil.exe. C、From the Update Services console, run the WSUS Server Configuration Wizard. D、From the Local Computer Policy, specify the location on the intranet for the Microsoft update service.
Your network consists of a single Active Directory domain. The network contains two servers named Server1 and Server2 that run Windows Server 2003 Service Pack 2 （SP2）.You log on to Server1 by using the Administrator account for the domain. You open Event Viewer and attempt to connect to Server2 but receive the following error message.You verify that you can connect to Server2 by using Windows Explorer and that Windows Firewall is disabled on Server2. You open the Services snap-in on Server2 as shown in the exhibit.You need to ensure that you can connect to Server2 remotely by using Event Viewer. What should you do on Server2？（）A、Add the Administrator account to the HelpServicesGroup.B、Set the Startup Type for the Remote Registry service to Automatic and then start the service.C、Set the Startup Type for the Secondary Logon service to Disabled and then stop the service.D、Set the Startup Type for the Special Administration Console Helper service to Automatic and then start the service.
Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). You have a server named Server1. Server1 is configured as an enterprise root certification authority (CA). You perform a complete backup of Server1 that includes the system state. Server1 fails. You install a new server named Server1. You need to recover the enterprise root CA. What should you do? （）A、Restore the system state backup.B、Restore the %systemroot%/system32/certsrv folder.C、From the Certificates snap-in, import the enterprise root CA certificate.D、From the Certificates snap-in, import the enterprise root CA certificate revocation list (CRL).
You are the network administrator for your company. The network consists of a single Active Directory domain. All servers run Windows Server 2003. All client computers run Windows XP Professional.You install Windows Server Update Services （WSUS） on a network server named Server1. When you attempt to synchronize Server1 with the Windows Update servers， you receive an error message. You open Internet Explorer and verify that you can communicate with an external Web site by using the proxy server. You need to ensure that Server1 can communicate with the Windows Update servers. What should you do on Server1？（）A、Restart the IIS administration tool.B、Configure the Internet Explorer settings to bypass the proxy server.C、In the WSUS options， configure authentication to the proxy server.D、Install the ISA Firewall Client.
Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). You have a server named Server1. Server1 is configured as an enterprise root certification authority (CA). You perform a complete backup of Server1 that includes the system state. Server1 fails. You install a new server named Server1. You need to recover the enterprise root CA. What should you do? （）A、Restore the system state backup.B、Restore the %systemroot%/system32/certsrv folder.C、From the Certificates snap-in, import the enterprise root CA certificate.D、From the Certificates snap-in, import the enterprise root CA certificate revocation list (CRL)
Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). All client computers run Windows XP Professional Service Pack 3 (SP3). You deploy a server named Server1 and install Terminal Server. After four months, users report that they can connect to Server1 by using Remote Desktop Connection, but are unable to log on. You verify that the user permissions have not changed. You need to ensure that users can log on to Server1 by using Remote Desktop Connection. What should you do? （）A、Restart Server1.B、Restore the system state of Server1.C、Install and configure Terminal Server Licensing.D、Modify the Terminal Services service account on Server1.
Your network consists of a single Active Directory domain. You have a domain controller named Server1 that runs Windows Server 2003 Service Pack 2 （SP2）. The DNS service is installed on Server1. Server1 contains only Active Directory-integrated zones. Zone transfers are disabled for all zones. You need to back up the DNS zones on Server1. What should you do？（）A、From a command prompt， run Nslookup.exe.B、From Windows Backup， back up the system state.C、From Windows Backup， back up %SystemRoot%/System32/DNS.D、From the DNS snap-in， right-click Server1 and then click Export List.
Your network consists of a single Active Directory domain. The domain contains a server named Server1. Server1 runs Windows Server 2003 Service Pack 2 （SP2）. You install Windows Support Tools on Server1. You need to view the IPSec settings applied to Server1. What command should you run on Server1？（）A、Netstat–r IPB、Netdiag/test：ipsecC、Sc query policyagentD、Netsh ipsec static show all
Your network consists of a single Active Directory domain. You have a DHCP server that runs Windows Server 2003 Service Pack 2 (SP2). All client computers run Windows XP Service Pack 3 (SP3). A user named User1 reports that when she starts her computer, she receives a duplicate address error message. You confirm that her computer is configured as a DHCP client. You need to ensure that User1 receives a unique IP address from the DHCP server. What should you do on the DHCP server?（）A、Reconcile the scope. B、Create a superscope.C、Enable conflict resolution.D、Increase the number of IP addresses available in the scope.
Your network consists of a single Active Directory domain. All servers run Windows Server 2003Service Pack 2 (SP2).You restore the system state on a member server.You attempt to log on to the server and receive the following error message: “The system cannot log youon to this domain because the system’s computer account in its primary domain is missing or thepassword on that account is incorrect.”You need to ensure that you can successfully log on to the domain from the server.What should you do on the server? （）A、Modify the password policy.B、Run the Dsrm.exe command.C、Restart the Netlogon service.D、Run the Netdom.exe reset command.
Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). All client computers run Windows XP Professional Service Pack 3 (SP3). You deploy a server named Server1 and install Terminal Server. After four months, users report that they can connect to Server1 by using Remote Desktop Connection, but are unable to log on. You verify that the user permissions have not changed. You need to ensure that users can log on to Server1 by using Remote Desktop Connection. What should you do? （）A、Restart Server1.B、Restore the system state of Server1.C、Install and configure Terminal Server Licensing.D、Modify the Terminal Services service account on Server1.
Your network consists of a single Active Directory domain named nwtraders.com. All network servers run Windows Server 2003 Service Pack 2 (SP2).The relevant IP configuration for the network is configured as shown in the following table. DC1 contains an Active Directory-integrated zone for nwtraders.com.From Server2, you run the Ping 172.26.26.11 command and receive a request timed out error message. From Server2, you run the Ping 172.16.16.129 command and receive a reply. You need to ensure that you can join Server2 to the nwtraders.com domain. What should you do?（） A、Set the IP address to 172.16.16.2.B、Set the subnet mask to 255.255.255.128.C、Set the default gateway address to 172.16.16.129.D、Set the preferred DNS server address to 172.16.16.130.
单选题Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). The domain contains two domain controllers named DC1 and DC2. DC1 is located in Montreal and DC2 is located in Seattle. Each domain controller has a dedicated hard disk that contains only the Active Directory database and log files. Each night, you back up the system state on all domain controllers. On DC2, the hard disk that contains Active Directory fails. You replace the failed hard disk on DC2. You need to restore domain controller functionality on DC2. The solution must minimize replication traffic between Montreal and Seattle. What should you do on DC2? （）AUninstall Active Directory and then reinstall Active Directory.BStart by using the Last Known Good Configuration.CStart in Directory Services Restore Mode and restore the NTDS.dit file.DStart in Directory Services Restore Mode and restore the system state.
单选题Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). All client computers run Windows XP Professional Service Pack 3 (SP3). You deploy a server named Server1 and install Terminal Server. After four months, users report that they can connect to Server1 by using Remote Desktop Connection, but are unable to log on. You verify that the user permissions have not changed. You need to ensure that users can log on to Server1 by using Remote Desktop Connection. What should you do? （）ARestart Server1.BRestore the system state of Server1.CInstall and configure Terminal Server Licensing.DModify the Terminal Services service account on Server1.
单选题Your network consists of a single Active Directory domain. All servers run Windows Server 2003Service Pack 2 (SP2).You restore the system state on a member server.You attempt to log on to the server and receive the following error message: “The system cannot log youon to this domain because the system’s computer account in its primary domain is missing or thepassword on that account is incorrect.”You need to ensure that you can successfully log on to the domain from the server.What should you do on the server? （）AModify the password policy.BRun the Dsrm.exe command.CRestart the Netlogon service.DRun the Netdom.exe reset command.
单选题Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). You have a server named Server1. Server1 is configured as an enterprise root certification authority (CA). You perform a complete backup of Server1 that includes the system state. Server1 fails. You install a new server named Server1. You need to recover the enterprise root CA. What should you do? （）ARestore the system state backup.BRestore the %systemroot%/system32/certsrv folder.CFrom the Certificates snap-in, import the enterprise root CA certificate.DFrom the Certificates snap-in, import the enterprise root CA certificate revocation list (CRL)
单选题Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). All client computers run Windows XP Professional Service Pack 3 (SP3). You deploy a server named Server1 and install Terminal Server. After four months, users report that they can connect to Server1 by using Remote Desktop Connection, but are unable to log on. You verify that the user permissions have not changed. You need to ensure that users can log on to Server1 by using Remote Desktop Connection. What should you do? （）ARestart Server1.BRestore the system state of Server1.CInstall and configure Terminal Server Licensing.DModify the Terminal Services service account on Server1.
单选题Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service Pack 2 (SP2). You restore the system state on a member server. You attempt to log on to the server and receive the following error message: “The system cannot log you on to this domain because the system’s computer account in its primary domain is missing or the password on that account is incorrect.” You need to ensure that you can successfully log on to the domain from the server. What should you do on the server? （）AModify the password policy.BRun the Dsrm.exe command.CRestart the Netlogon service.DRun the Netdom.exe reset command.