You have a computer that runs Windows 7. You install a second internal hard disk drive in the computer.You attempt to create a system image and discover that the new disk is not listed as a backup destination.You need to ensure that you can use the new disk as a backup destination for system images. What should you do?（）A、Create a NTFS partition.B、Create a mirrored volume.C、Create a system repair disc.D、Log on to the computer by using a different account.
You have a computer that runs Windows 7. You install a second internal hard disk drive in the computer.You attempt to create a system image and discover that the new disk is not listed as a backup destination.You need to ensure that you can use the new disk as a backup destination for system images. What should you do?（）
- A、Create a NTFS partition.
- B、Create a mirrored volume.
- C、Create a system repair disc.
- D、Log on to the computer by using a different account.
相关考题：
Your Windows 2000 Server computer named EzonexamSrv contains a single 18-GB hard disk. The drive is configured as a basic disk and has two partitions. Partition C is 2 GB in size and contains the operating system files. Partition D is 16 GB in size and contains user data that is updated frequently.Both partitions are formatted as NTFS. Both partitions are backed up to a tape every evening at 10:00 P.M.You have a current Emergency Repair Disk (ERD) for EzonexamSrv, and the Recovery Console is installed on the computer.One day at4:00 P.M., the server fails. You attempt to restart EzonexamSrv, but you receive the following error message:"Boot disk or operating system not found".You use Recovery Console to discover that the files on partition C are corrupted.You need to recover EzonexamSrv from the failure as quickly as possible. You also must recover as much user data as possible.What should you do?A．Use the ERD to start the computer. Replace the corrupted files on partition C by copying them from a Windows 2000 Server CD-ROM.B．Boot the Recovery Console. Copy any files that have changed since 10:00 P.M. the previous evening to a second server. Use the most recent tape backup to restore the remaining user data to the second server.C．Start the computer by using a Windows 2000 Server CD-ROM. Select the Repair option in Setup.D．Install a second hard disk in the computer. Install Windows 2000 Server on the new hard disk. Re-create the shared folders on the first hard disk.
You are the network administrator for Ezonexam.The network includes a Windows 2000 Server computer that contains a single 36-GB hard disk. The drive is configured as a basic disk and has two partitions. Partition C is 4 GB in size and contains the operating system files. Partition D is 32 GB in size and contains user data that is updated frequently.Both partitions are formatted as NTFS. Both partitions are backed up to a tape every evening at 11:00 P.M.You have a current Emergency Repair Disk (ERD) for the computer, and Recovery Console is installed on the computer.One day at2:00 P.M., the server fails. You attempt to restart the computer, but you receive the following error message: "Boot disk or operating system not found." You use Recovery Console to discover that the files on partition C are corrupted.You want to recover the server from the failure as quickly as possible. You also want to recover as much user data as possible.What should you do?A．Start the computer by using a Windows 2000 Server compact disc. Select the Repair option in Setup.B．Install a second hard disk in the computer. Install Windows 2000 Server on the new hard disk. Re-create the shared folders on the first hard disk.C．Use a Windows 2000 Server boot floppy disk to start the computer. Replace the corrupted files on partition C by copying them from the Emergency Repair Disk.D．Boot to the Recovery Console. Copy any files that have changed since 11:00 P.M. the previous evening to a second server. Use the most recent tape backup to restore the remaining user data to the second server.
You plan to install Windows 7 on a computer that contains a single hard disk drive. The hard disk drive isconnected to a RAID controller. During the installation, you discover that the Windows 7 installation mediadoes not include the files required to install the RAID controller. You need ensure that you can installWindows 7 on the hard disk drive. What should you do?（）A、Insert the Windows installation media and press F8 during the computer s power-on self test (POST).B、Insert the Windows installation media and press F6 during the computer s power-on self test (POST).C、Start the computer from the Windows installation media. From the Install Windows dialog box, click Load Driver.D、Start the computer from the Windows installation media. From the Install Windows dialog box, click Drive options (advanced).
You have a print server named Server1 that runs Windows Server 2012 R2. You discover that when there are many pending print jobs， the system drive occasionally runs out of free space. You add a new hard disk to Server1. You create a new NTFS volume. You need to prevent the print jobs from consuming disk space on the system volume. What should you modify？（）A、the properties of the Print Spooler serviceB、the Print Server PropertiesC、the properties of each shared printerD、the properties on the new volume
You have a computer that runs Windows XP professional. The computer contains one partition and a floppy disk drive. You connect a new USB drive. You need to back up the computer to meet the following requirements: Enable a complete recovery if the hard disk fails. Enable an automatic restore of the operating systems. Automatically recreate the partitions during a restore process. What should you do?（）A、From System Restore, create a system restore point.B、From the System Tools menu, run the Files and Settings Transfer Wizard.C、From Windows Backup, run the Automated System Recovery (ASR) Wizard. D、From Windows Backup, run the Backup Wizard, and then select Only backup the System State data.
You have a reference computer that runs Windows 7. You plan to create an image of the computer andthen deploy the image to 100 computers. You need to prepare the reference computer for imaging. What should you do before you create the image?（）A、Run Package Manager.B、Run the System Preparation too.C、Install the User State Migration Tool.D、Install Windows Automated Installation Kit.
You have a server that runs Windows Server 2003 Service Pack 2 (SP2). You need to ensure that a defragmentation of the server’s hard disk drive runs each night. What should you do? （）A、Create a scheduled task that runs Dfrg.msc.B、Create a scheduled task that runs Defrag.exe.C、From Computer Management, run Disk Management.D、From Computer Management, run Disk Defragmenter.
You have a computer that runs Windows XP Professional. The computer has multiple FAT32- formatted partitions. You install a new disk drive. You create a new FAT32-formatted partition in the new disk drive. You need to mount the new partition as a folder in drive C. What should you do?（） A、Convert the C partition to NTFS. From Disk Management, modify the drive path of the new partition.B、Convert the new partition to NTFS. From Disk Management, modify the drive path of the C partition.C、Upgrade all disks to dynamic disks. From Diskpart, set the new partition as Active. Add an entry to the boot.ini file. D、Upgrade all disks to dynamic disks. From Diskpart, clear all configuration information for the new disk. Add an entry to the boot.ini file.
You have a computer that runs Windows 7. You need to configure system image backups to meet thefollowing requirements: Automatically create a system image every day without user intervention Retain multiple copies of the system image. Which type of backup destination should you use?（ ）A、external hard disk driveB、network locationC、USB flash driveD、writeable DVD
You are configuring 5 computers to use both Windows NT workstation 4.0 and Windows 2000 Professional. Each computer has an 8GB hard disk. You configure that hard disk on each computer to have two 4GB partitions. Windows NT workstation is installed on drive C. Windows 2000 Professional is installed on drive D. In Windows 2000 Professional you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computer and load Windows NT workstation. You notice that users can still save files to drive D. You want to prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives using either operating system. What should you do on each computer? （）A、Use Windows 2000 Professional to configure drive D as a dynamic volumeB、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive DC、Use Windows NT workstation to configure NTFS permission on drive D to deny the users write permissionD、Reinstall Windows NT workstation after configuring the disk code task
You have a netbook computer that runs Windows 7. The computer has a single 30-GB partition that has 10GB of free space. You need to create a system image of the computer by using Windows Backup. You mustachieve this goal by using the minimum amount of time. What should you do first?（）A、Attach an external hard disk.B、Attach an external DVD burner.C、Convert the local hard disk to a GPT disk.D、Create and attach a virtual hard drive （VHD）.
You are the desktop administrator for your company. You are responsible for automating the deployment of Windows XP Professional to new computers in your company. You are preparing a Windows XP Professional computer, which you will use to test disk imaging. You install Windows XP Professional on the test computer and run the Sysprep utility. You use a third-party software package to create a disk image. You apply the disk image to a new computer and then restart the computer. Instead of completing the Windows XP Professional installation, the computer starts the Windows Welcome program, requiring you to enter additional setup information. Because you will be deploying a large number of computers, you want to ensure that the disk image can be applied without additional user interaction. What should you do?（） A、Use a network-based RIS server to apply the disk image to new computers. B、On the test computer, run the Sysprep -factory command. Re-create the disk image by using the third-party software. C、Use Setup Manager to create a Sysprep answer file. Copy the answer file to a floppy disk, and insert the disk into new computers when the disk image is applied. D、Create an Unattend.txt answer file. Copy the file to the C:/Winnt/System32 folder on the testcomputer. Run the Sysprep utility and re-create the disk image by using the third-party software.
You are planning to deploy Windows 7 Enterprise to all of your company’s client computers. You have the following requirements： Create two custom partitions on each client computer’s hard disk， one for the operating system and the other for data. Automatically create the partitions during Windows Setup. You need to design an image that meets the requirements. What should you do？（）A、Use Windows PE to create the partitions. Install Windows 7 on the first partition.B、Use Windows System Image Manager （Windows SIM） to specify the partition configuration.C、Use Disk Management to create the two partitions on the hard disk.D、Use SysPrep to create the two partitions during Windows Setup.
You have a computer that runs Windows 7. Windows Backup is configured to store backups on an externaldrive. You create a new NTFS volume on the computer. You need to configure Windows Backup to includethe files on the new volume as part of regularly scheduled backups. What should you do?（）A、From Backup and Restore， select Change settings.B、From Backup and Restore， select Create a system image.C、From the System Protection tab， create a restore point.D、From the System Protection tab， enable system protection for the new volume.
You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has an 8 GB hard disk. You configure the hard disk on each computer to have two 4 GB partitions. Windows NT Workstation is installed on drive C and Windows 2000 Professional on drive D. In Windows 2000 Professional， you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart your computer and load Windows NT Workstation. You notice that users can save files to drive D. You want to prevent users from saving the files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system. What should you do？（）A、Use Windows 2000 Professional to configure drive D as a dynamic partitionB、Use Windows 2000 Professional to enable encrypting file system on drive DC、Use Windows NT workstation to configure NTFS permissions on drive D to deny the users write permissionD、Reinstall Windows NT Workstation after configuring disk quotas
You have a computer that runs Windows 7. You perform regular data backups and system image backups.The computer experiences a hard disk failure. You replace the failed hard disk. You need to recover thecomputer to the previous Windows 7 environment. You start the computer from the Windows 7 installationmedia. Which recover option should you select?（）A、Command PromptB、Startup RepairC、System Image RecoveryD、System Restore
You need to ensure that you can recover system configuration and data if your computer hard disk fails. What should you do？ （）A、Create a system restore point.B、Create a backup of all file categories.C、Create a Complete PC Backup and Restore image.D、Perform an Automated System Recovery （ASR） backup.
You have a computer that runs Windows 7. You add a new hard disk drive to the computer and create anew NTFS partition. You need to ensure that you can use the Previous Versions feature on the new drive. What should you do?（）A、From Disk Management, convert the new disk to a dynamic disk.B、From System Properties, configure the System Protection settings.C、From System and Security, enable BitLocker Drive Encryption (BitLocker).D、From the properties of the new drive, create a share and modify the caching settings.
You are deploying a custom Windows 7 system image to a new computer. You perform the following tasks:.Start the new computer by using the Windows Preinstallation Environment (Windows PE) .Connect to ashared network location that contains the Windows 7 image file You need to apply the Windows 7 image tothe computer. What should you do before you apply the image?（）A、Mount the image.B、Configure Windows Firewall.C、Configure and format the hard disk drive.D、Initialize the Boot Configuration Data （BCD） store.
You are the administrator of a Windows 2000 network. You are configuring eight computers to use both Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has a 10 GB hard disk. You configure the hard disk on each computer to have two 5 GB partitions. Windows NT Workstation is installed on drive D. Windows 2000 Professional is installed on drive C. In Windows 2000 Professional, you configure a disk quota on drive C to prevent users from saving work files on the disk. You restart the computers and load Windows NT Workstation 4.0. You notice that users can still save files to drive C. You want to prevent users from saving files to drive C in either operating system. You also want to ensure that users can access both drives while using either operating system. What should you do on each computer? （）A、Reinstall Windows NT Workstation 4.0 after configuring the disk quotasB、Use Windows 2000 Professional to configure drive C as a dynamic partitionC、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive CD、Use Windows NT Workstation 4.0 to configure NTFS permissions on drive C to deny the usersWrite permission
单选题You have a computer that runs Windows 7. You perform regular data backups and system image backups.The computer experiences a hard disk failure. You replace the failed hard disk. You need to recover thecomputer to the previous Windows 7 environment. You start the computer from the Windows 7 installationmedia. Which recover option should you select?（）ACommand PromptBStartup RepairCSystem Image RecoveryDSystem Restore
单选题You are planning to deploy Windows 7 Enterprise to all of your company’s client computers. You have the following requirements： Create two custom partitions on each client computer’s hard disk， one for the operating system and the other for data. Automatically create the partitions during Windows Setup. You need to design an image that meets the requirements. What should you do？（）AUse Windows PE to create the partitions. Install Windows 7 on the first partition.BUse Windows System Image Manager （Windows SIM） to specify the partition configuration.CUse Disk Management to create the two partitions on the hard disk.DUse SysPrep to create the two partitions during Windows Setup.
单选题You are the desktop administrator for your company. You are responsible for automating the deployment of Windows XP Professional to new computers in your company. You are preparing a Windows XP Professional computer, which you will use to test disk imaging. You install Windows XP Professional on the test computer and run the Sysprep utility. You use a third-party software package to create a disk image. You apply the disk image to a new computer and then restart the computer. Instead of completing the Windows XP Professional installation, the computer starts the Windows Welcome program, requiring you to enter additional setup information. Because you will be deploying a large number of computers, you want to ensure that the disk image can be applied without additional user interaction. What should you do?（）AUse a network-based RIS server to apply the disk image to new computers. BOn the test computer, run the Sysprep -factory command. Re-create the disk image by using the third-party software. CUse Setup Manager to create a Sysprep answer file. Copy the answer file to a floppy disk, and insert the disk into new computers when the disk image is applied. DCreate an Unattend.txt answer file. Copy the file to the C:/Winnt/System32 folder on the testcomputer. Run the Sysprep utility and re-create the disk image by using the third-party software.
单选题You have a print server named Server1 that runs Windows Server 2012 R2. You discover that when there are many pending print jobs， the system drive occasionally runs out of free space. You add a new hard disk to Server1. You create a new NTFS volume. You need to prevent the print jobs from consuming disk space on the system volume. What should you modify？（）Athe properties of the Print Spooler serviceBthe Print Server PropertiesCthe properties of each shared printerDthe properties on the new volume
单选题You have a computer that runs Windows 7. You install a second internal hard disk drive in the computer.You attempt to create a system image and discover that the new disk is not listed as a backup destination.You need to ensure that you can use the new disk as a backup destination for system images. What should you do?（）ACreate a NTFS partition.BCreate a mirrored volume.CCreate a system repair disc.DLog on to the computer by using a different account.
单选题Your network contains a server named Server1 that runs Windows Server 2008 R2. The disks on Server1 are configured as shown in the following table. Disk name Disk type Disk 0 Internal hard disk drive Disk 1 External hard disk drive Disk 2 Virtual hard disk You run the Backup Once wizard and discover that the option for Full Server backup is unavailable. You need to ensure that you can run a full server backup of Server1. What should you do？（）ATake Disk 1 offline.BTake Disk 2 offline.CRun the Set-WBPolicy cmdlet.DRun Windows Server Backup as an Administrator.
单选题You have a netbook computer that runs Windows 7. The computer has a single 30-GB partition that has 10GB of free space. You need to create a system image of the computer by using Windows Backup. You mustachieve this goal by using the minimum amount of time. What should you do first?（）AAttach an external hard disk.BAttach an external DVD burner.CConvert the local hard disk to a GPT disk.DCreate and attach a virtual hard drive （VHD）.