The SPFILE for your database contains the following parameter settings： SGA_TARGET = 1000M DB_CACHE_SIZE = 512M SHARED_POOL_SIZE = 128M LOG_BUFFER = 10M DB_8K_CACHE_SIZE = 50M What is the total memory that can be distributed across the auto-tuned memory components？（） A、 940MB、 990MC、 690MD、 1000M
The SPFILE for your database contains the following parameter settings： SGA_TARGET = 1000M DB_CACHE_SIZE = 512M SHARED_POOL_SIZE = 128M LOG_BUFFER = 10M DB_8K_CACHE_SIZE = 50M What is the total memory that can be distributed across the auto-tuned memory components？（）
- A、 940M
- B、 990M
- C、 690M
- D、 1000M
相关考题：
Examine the parameter setting in your database:Which statement is correct about the database?() A. Automatic memory management is disabled because PGA_AGGREGATE_TARGET and SGA_TARGET are not setB. The instance is started but the database will not be opened until PGA_AGGREGATE_TARGET and SGA_TARGET are setC. The database is opened but users cannot perform transactions until PGA_AGGREGATE_TARGET and SGA_TARGET are setD. Automatic memory management is enabled and, as per policy, 60% of the memory for System Global Area (SGA) and 40% of the memory for Program Global Area (PGA) will be distributed at startup
You set the following parameters in the parameter file and restarted the database:Which two statements are true regarding these parameters after the database instance is restarted?() A. The MEMORY_MAX_TARGET parameter is automatically set to 500 MBB. The value of the MEMORY_MAX_TARGET parameter remains zero till it is changed manuallyC. The PGA_AGGREGATE_TARGET and SGA_TARGET parameters are automatically set to zeroD. The lower bounds of PGA_AGGREGATE_TARGET and SGA_TARGET parameters are set to 90 MB and 270 MB, respectively
Note the following parameters settings in your database:What would happen?() A. It will fail because DB_8K_CACHE_SIZE parameter cannot be changed dynamicallyB. It will be successful only if the memory is available from the auto tuned componentsC. It will fail because an increase in DB_8K_CACHE_SIZE cannot be accommodated within SGA_TARGETD. It will fail because an increase in the DB_8K_CACHE_SIZE cannot be accommodated within SGA_MAX_SIZE
You specify a nonzero value for the MEMORY_TARGET initialization parameter, but do not set the PGA_AGGREGATE_TARGET or the SGA_TARGET parameters. You restart your database instance.Which statement about the result is true?（）A. The database instance starts, and Oracle sets the default value of SGA_TARGET to the same value as SGA_MAX_SIZEB. The database instance starts, and Oracle automatically tunes memory and allocates 60 percent to the SGA and 40 percent to the PGAC. The database instance starts, but Automatic Memory Management is disabledD. The database instance will not start because you did not specify the PGA_AGGREGATE_TARGET or SGA_TARGET parameter
Which three statements regarding the server parameter file （SPFILE） are true（）A、An SPFILE is a binary file.B、An SPFILE cannot reside on a client.C、An SPFILE cannot contain static parameters.D、An SPFILE can store changes persistently across instance restarts.E、An SPFILE can be read by the database server， but it is not written to by the server.F、An SPFILE must be created manually， before creating a database， even if you use the DatabaseConfiguration Assistant （DBCA） to create the database.
You specify a nonzero value for the MEMORY_TARGET initialization parameter，but do not set the PGA_AGGREGATE_TARGET or the SGA_TARGET parameters. You restart your database instance. Which statement about the result is true？（）A、 The database instance starts，and Oracle sets the default value of SGA_TARGET to the same value as SGA_MAX_SIZEB、 The database instance starts，and Oracle automatically tunes memory and allocates 60 percent to the SGA and 40 percent to the PGAC、 The database instance starts，but Automatic Memory Management is disabledD、 The database instance will not start because you did not specify the PGA_AGGREGATE_TARGET or SGA_TARGET parameter
In your running instance， some of the initialization parameters are set as shown below： SGA_MAX_SIZE = 14GB DB_CACHE_SIZE = 1GB SHARED_POOL_SIZE = 3GB STATISTICS_LEVEL = BASIC PGA_AGGREGATE_TARGET = 0 You plan to enable Automatic Shared Memory Management but you are not able to set SGA_TARGET to a nonzero value. What could be the reason？（）A、The STATISTICS_LEVEL initialization parameter is set to BASICB、The PGA_AGGREGATE_TARGET initialization parameter is set to zero.C、The SGA_MAX_SIZE initialization parameter is set to less than 20 GBD、The DB_CACHE_SIZE initialization parameter is set to less than 5 GBE、The SHARED_POOL_SIZE initialization parameter is set to a nonzero value.
Your database instance is started using the server parameter file （SPFILE）. You executed acommand to change the value of the LOG_BUFFER initialization parameter： ALTER SYSTEM SET LOG_BUFFER=32M SCOPE=BOTH； What would be the outcome of this command（）A、The command succeeds only if Automatic Memory Management is not enabled.B、The command succeeds， but you need to restart the database for changes to take effect.C、The command returns an error because the size of the redo log buffer cannot be changed dynamically.D、The parameter value is changed and it comes into effect as soon as space becomes available in the System Global Area （SGA）.
You recently created a database and configured the SPFILE with the following parameter settings to ensure that Oracle automatically adjusts the memory for the Program Global Area （PGA）： SORT_AREA_SIZE = 150M HASH_AREA_SIZE = 150M BITMAP_MERGE_AREA_SIZE = 150M CREATE_BITMAP_AREA_SIZE = 150M WORKAREA_SIZE_POLICY = AUTO You have not included the PGA_AGGREGATE_TARGET initialization parameter in the SPFILE and the System Global Area （SGA） is currently sized at 4G. What is the total PGA memory allocated across all database server processes？（） A、 10MB、 400MC、 600MD、 800M
our database instance is started using the server parameter file （SPFILE）. You executed a command tochange the value of the LOG_BUFFER initialization parameter：ALTER SYSTEM SET LOG_BUFFER=32M SCOPE=BOTH； What would be the outcome of this command（）A、The command succeeds only if Automatic Memory Management is not enabled.B、The command succeeds， but you need to restart the database for changes to take effect.C、The command returns an error because the size of the redo log buffer cannot be changed dynamically.D、The parameter value is changed and it comes into effect as soon as space becomes available in theSystem Global Area （SGA）
You create an Oracle 10g database and configure the SPFILE as follows： SGA_TARGET=2G DB_CACHE_SIZE=512M LOG_BUFFER=50M DB_KEEP_CACHE_SIZE=128M You modify the SGA_TARGET initialization parameter using the following statement： SQLALTER SYSTEM SET SGA_TARGET = 1G SCOPE = BOTH； Which entity does this statement affect？（） A、 only the auto-tuned memory componentsB、 only the memory components that are not auto-tunedC、 both the auto-tuned memory components and the non-auto-tuned memory componentsD、 neither the auto-tuned memory components nor the non-auto-tuned memory components
Your database is started by using the server parameter file （SPFILE）. You issued this command to change the value of the LOG_BUFFER initialization parameter： ALTER SYSTEM SET LOG_BUFFER=24M SCOPE=BOTH； What would be the outcome of this command？ （）A、The command would return an error because LOG_BUFFER is a static parameter.B、The parameter value would be changed and it would come into effect immediately.C、You need to restart the database so that parameter changes can come into effect.D、The command would succeed only if initialization parameter LOG_ARCHIVE_MAX_PROCESS is set to value 2.
Your SPFILE contains the following parameter settings： SGA_TARGET = 8G DB_CACHE_SIZE = 4G SHARED_POOL_SIZE = 2G LARGE_POOL_SIZE = 512M JAVA_POOL_SIZE = 512M LOG_BUFFER = 100M SGA_MAX_SIZE = 10G You query the V$SGA_DYNAMIC_COMPONENTS dynamic performance view and discover that the large pool component is currently sized at 1G. You want the value of the SGA_TARGET initialization parameter to 10G， but instead of specifying a value of 10G for the SGA_TARGET initialization parameter， you erroneously execute the following statement： SQLALTER SYSTEM SET SGA_TARGET = 0 SCOPE = BOTH； What is the result of this statement？（） A、 The database crashes.B、 The large pool releases 512M of memory.C、 The large pool retains 1G of allocated memory.D、 The large pool increases to 1，512M of memory.
The database has the data block size set to 8 KB. You need to import a tablespace with a 4 KB block size into the database. Which additional memory parameter（s） should be configured to perform a transportable tablespace import？（）A、 DB_4K_CACHE_SIZE onlyB、 DB_8K_CACHE_SIZE onlyC、 DB_BLOCK_SIZE and DB_4K_CACHE_SIZED、 DB_BLOCK_SIZE and DB_8K_CACHE_SIZEE、 SGA_TARGET and DB_4K_CACHE_SIZEF、 DB_CACHE_SIZE only
You are configuring the PROD database to use an internal tuning algorithm to monitor the performance of the workload. To achieve this configuration， you specify the following parameter settings in the SPFILE:// SGA_TARGET = 512M SHARED_POOL_SIZE = 256M Which two statements are true when modifying the SHARED_POOL_SIZE initialization parameter in the SPFILE？ （）A、 Modifying the SHARED_POOL_SIZE initialization parameter cannot be accomplished if the SGA_TARGET initialization parameter is set to a non-zero value.B、 Modifying the value of the SHARED_POOL_SIZE initialization parameter to zero is not allowed if the SGA_TARGET initialization parameter is set to a nonzero value.C、 Increasing the value of the SHARED_POOL_SIZE initialization parameter does not increase the shared pool component size. It sets the lower limit for the size of this component.D、 Decreasing the value of the SHARED_POOL_SIZE initialization parameter does not reduce the size of the shared pool component immediately. It sets the lower limit for the size of this component.E、 Increasing the value of the SHARED_POOL_SIZE initialization parameter immediately increases the shared pool component to the desired size by reallocating the additional memory from the auto-tuned memory components.F、 Decreasing the value of the SHARED_POOL_SIZE initialization parameter immediately shrinks the shared pool component to the desired size while reallocating the released memory to the memory components that are not auto-tuned.
Your database block size is 4 KB. In this database， you are required to create a tablespace with a block size of 8 KB. Which is the prerequisite for creating this tablespace？（）A、 The parameter DB_CACHE_SIZE must be a multiple of 8.B、 The value of the parameter SGA_MAX_SIZE must be increased.C、 The tablespace must be created with a uniform extent size of 8 KBD、 The parameter DB_8K_CACHE_SIZE must be defined in the parameter file.
Note the following parameters settings in your database: SGA_MAX_SIZE = 1024M SGA_TARGET = 700M DB_8K_CACHE_SIZE = 124M LOG_BUFFER = 200M You issued the following command to increase the value of DB_8K_CACHE_SIZE: SQL ALTER SYSTEM SET DB_8K_CACHE_SIZE=140M; What would happen?（）A、It will fail because DB_8K_CACHE_SIZE parameter cannot be changed dynamicallyB、It will be successful only if the memory is available from the auto tuned componentsC、It will fail because an increase in DB_8K_CACHE_SIZE cannot be accommodated within SGA_TARGETD、It will fail because an increase in the DB_8K_CACHE_SIZE cannot be accommodated within SGA_MAX_SIZE
多选题Which statements regarding the server parameter file （SPFILE） are true（）AAn SPFILE is a binary file.BAn SPFILE cannot reside on a client.CAn SPFILE cannot contain static parameters.DAn SPFILE can store changes persistently across instance restarts.EAn SPFILE can be read by the database server， but it is not written to by the server.FAn SPFILE must be created manually， before creating a database， even if you use the DatabaseConfiguration Assistant （DBCA） to create the database
单选题Your database instance is started using the server parameter file （SPFILE）. You executed acommand to change the value of the LOG_BUFFER initialization parameter： ALTER SYSTEM SET LOG_BUFFER=32M SCOPE=BOTH； What would be the outcome of this command（）AThe command succeeds only if Automatic Memory Management is not enabled.BThe command succeeds， but you need to restart the database for changes to take effect.CThe command returns an error because the size of the redo log buffer cannot be changed dynamically.DThe parameter value is changed and it comes into effect as soon as space becomes available in the System Global Area （SGA）.
多选题You set the value of the SGA_TARGET initialization parameter to 1G to enable Oracle to automatically resize most of the memory components according to the current workload in the database. You issue the following statement： SQL SELECT name， value， isdefault 2 FROM v$parameter 3 WHERE name LIKE ’%size%’； The output of this statement displays that the DB_CACHE_SIZE， SHARED_POOL_SIZE， LARGE_POOL_SIZE， and JAVA_POOL_SIZE initialization parameters contain a zero value. What does this imply？（）AThe SGA_TARGET initialization parameter cannot be set to a value less than 1GBThe SGA_TARGET initialization parameter cannot be set to a value greater than 1GCThe Memory Advisor of the Oracle Enterprise Manager 10g cannot be used to obtain advice on the important memory components of the SGADThe values of the DB_CACHE_SIZE， SHARED_POOL_SIZE， LARGE_POOL_SIZE， and JAVA_POOL_SIZE initialization parameters cannot be set manually.ENo minimum limits are imposed on the DB_CACHE_SIZE， SHARED_POOL_SIZE， LARGE_POOL_SIZE， and JAVA_POOL_SIZE initialization parameters.FThe Automatic Shared Memory Management feature cannot be disabled unless you specify values for the DB_CACHE_SIZE， SHARED_POOL_SIZE， LARGE_POOL_SIZE， and JAVA_POOL_SIZE initialization parameters in the initialization parameter file.
单选题Your database is started by using the server parameter file （SPFILE）. You issued this command to change the value of the LOG_BUFFER initialization parameter： ALTER SYSTEM SET LOG_BUFFER=24M SCOPE=BOTH; What would be the outcome of this command？（）AThe command would return an error because LOG_BUFFER is a static parameter.BThe parameter value would be changed and it would come into effect immediately.CYou need to restart the database so that parameter changes can come into effect.DThe command would succeed only if initialization parameter LOG_ARCHIVE_MAX_PROCESS is set to value 2.
单选题The SPFILE for your database contains the following parameter settings： SGA_TARGET = 1000M DB_CACHE_SIZE = 512M SHARED_POOL_SIZE = 128M LOG_BUFFER = 10M DB_8K_CACHE_SIZE = 50M What is the total memory that can be distributed across the auto-tuned memory components？（）A 940MB 990MC 690MD 1000M
单选题You have included the following parameter settings in your SPFILE:// SGA_MAX_SIZE=8G SGA_TARGET=6G DB_CACHE_SIZE=2G SHARED_POOL_SIZE=1G LOG_BUFFER=64M DB_KEEP_CACHE_SIZE=960M Which statement is true if you modify the SGA_TARGET initialization parameter？（）AThe SGA_TARGET initialization parameter cannot be set to a value greater than 8GB The DB_CACHE_SIZE initialization parameter cannot be set to a value less than 2GC The DB_CACHE_SIZE initialization parameter cannot be set to a value greater than 2GD The DB_KEEP_CACHE_SIZE initialization parameter cannot be set to a value greater than 960M E The DB_KEEP_CACHE_SIZE initialization parameter cannot be set to a value less than 960M
单选题The SPFILE for the PROD database specifies the following initialization parameter values： SGA_TARGET = 2G DB_8K_CACHE_SIZE = 128M You create a tablespace named HR with the non-standard block size of 8K. Four database users are running queries on a table in the HR tablespace. These users complain that the queries are taking longer than usual to complete. While investigating the reasons for this delay， you discover that the database encounters extensive cache misses on the database buffer cache with the block size of 8K. You issue the following statement to increase the value of the DB_8K_CACHE_SIZE initialization parameter to 256M： SQLALTER SYSTEM SET DB_8K_CACHE_SIZE=256M SCOPE = BOTH； What is the result of this statement？（）A The statement fails because you cannot set the memory components manually if the SGA_TARGET initialization parameter is set to a nonzero value.B The statement fails because the DB_8K_CACHE_SIZE initialization parameter is not a dynamic parameter.C The statement increases the value of the DB_8K_CACHE_SIZE initialization parameter to 256M and extracts an additional 128M of memory from the automatically sized memory components.D The statement increases the value of the DB_8K_CACHE_SIZE initialization parameter to 256M and reallocates an additional 128M memory from the memory components that are not auto-tuned.
单选题our database instance is started using the server parameter file （SPFILE）. You executed a command tochange the value of the LOG_BUFFER initialization parameter：ALTER SYSTEM SET LOG_BUFFER=32M SCOPE=BOTH； What would be the outcome of this command（）AThe command succeeds only if Automatic Memory Management is not enabled.BThe command succeeds， but you need to restart the database for changes to take effect.CThe command returns an error because the size of the redo log buffer cannot be changed dynamically.DThe parameter value is changed and it comes into effect as soon as space becomes available in theSystem Global Area （SGA）
单选题Your SPFILE contains the following parameter settings： SGA_TARGET = 8G DB_CACHE_SIZE = 4G SHARED_POOL_SIZE = 2G LARGE_POOL_SIZE = 512M JAVA_POOL_SIZE = 512M LOG_BUFFER = 100M SGA_MAX_SIZE = 10G You query the V$SGA_DYNAMIC_COMPONENTS dynamic performance view and discover that the large pool component is currently sized at 1G. You want the value of the SGA_TARGET initialization parameter to 10G， but instead of specifying a value of 10G for the SGA_TARGET initialization parameter， you erroneously execute the following statement： SQLALTER SYSTEM SET SGA_TARGET = 0 SCOPE = BOTH； What is the result of this statement？（）A The database crashes.B The large pool releases 512M of memory.C The large pool retains 1G of allocated memory.D The large pool increases to 1，512M of memory.
单选题You recently created a database and configured the SPFILE with the following parameter settings to ensure that Oracle automatically adjusts the memory for the Program Global Area （PGA）： SORT_AREA_SIZE = 150M HASH_AREA_SIZE = 150M BITMAP_MERGE_AREA_SIZE = 150M CREATE_BITMAP_AREA_SIZE = 150M WORKAREA_SIZE_POLICY = AUTO You have not included the PGA_AGGREGATE_TARGET initialization parameter in the SPFILE and the System Global Area （SGA） is currently sized at 4G. What is the total PGA memory allocated across all database server processes？（）A 10MB 400MC 600MD 800M