In a switched LAN network, what is the Spanning-Tree algorithm used for?（）A、It is used to provide a mechanism for routing updates in switched environments.B、It is used to prevent routing loops in networks with redundant routes.C、It is used to prevent switching loops in networks with redundant switched routes.D、It is used to manage, the addition, deletion, and naming of VLANs across multiple switches.E、It is used to segment a network into multiple collision domains.F、None of the above.G、All of the above are functions of STP.
In a switched LAN network, what is the Spanning-Tree algorithm used for?（）
- A、It is used to provide a mechanism for routing updates in switched environments.
- B、It is used to prevent routing loops in networks with redundant routes.
- C、It is used to prevent switching loops in networks with redundant switched routes.
- D、It is used to manage, the addition, deletion, and naming of VLANs across multiple switches.
- E、It is used to segment a network into multiple collision domains.
- F、None of the above.
- G、All of the above are functions of STP.
相关考题：
You need to decide on which trunking method to implement in the Ezonexam network. What is a characteristic of ISL and 802.1q frame. tagging in a switched LAN environment?A．They are used to find the best path through a network.B．They allow the exchange of filtering tables.C．They specify different implementations of the Spanning-Tree Protocol.D．They allow the exchange of routing tablesE．They provide inter-switch VLAN communication.
You have a DHCP server that runs Windows Server 2008 R2. The DHCP server has two network connections named LAN1 and LAN2.You need to prevent the DHCP server from responding to DHCP client requests on LAN2. The server must continue to respond to non-DHCP client requests on LAN2.What should you do？（）A. From the DHCP snap-in, modify the bindings to associate only LAN1 with the DHCP service.B. From the DHCP snap-in, create a new multicast scope.C. From the properties of the LAN1 network connection, set the metric value to 1.D. From the properties of the LAN2 network connection, set the metric value to 1.
In the Ezonexam switched LAN environment, what does the IEEE 802.1Q standard describe?A. VLAN pruningB. A method of VLAN trunkingC. An approach to wireless LAN communicationD. The operation of VTPE. The process for root bridge selectionF. None of the above
whether to go with a shared or switched fast LAN technology once you start to max out your shared Ethernet of token-ring LAN is tough call. Users and analysts involved in(101)high-speed LANs have learned the benefits of each. However, there are trade-offs to each, and(102)which fast LAN technology to choose is critical for(103)network performance problems and(104)costly purchasing mistakes.A．avoidingB．clippingC．choosingD．decidingE．dissolving
What is a Label－Switched Path?() A. a traffic engineered pathB. another name for a Frame Relay PVCC. a bidirectional path through a networkD. a unidirectional path through a network
What does a router do?() A.Routes traffic down alternative paths and connects the local-area network (LAN) to the wide- area network (WAN)B.Reads Media Access Control (MAC) addresses to forward messages to the correct location and connects the local-area network (LAN) to the wide-area network (WAN)C.Stores data on the network and connects the local-area network (LAN) to the wide-area network (WAN)D.Broadcasts data to all devices that are connected to it across the local-area network (LAN) and wide-area network (WAN)
ABC Company has 1500 managed devices and 15,000 end users on a campus network. LAN Management Solution (LMS) is being deployed as the network management application. What is the recommended number of network management server(s)?（）A.1B.2C.3D.4
In a switched environment, what does the IEEE 802.1Q standard describe?() A.the operation of VTPB.a method of VLAN trunkingC.an approach to wireless LAN communicationD.the process for root bridge selectionE.VLAN pruning vlan
In a switched environment, what does the IEEE 802.1Q standard describe?（）A、the operation of VTPB、a method of VLAN trunkingC、an approach to wireless LAN communicationD、the process for root bridge selectionE、VLAN pruning vlan
What is the purpose of the spanning-tree algorithm in a switched LAN?（）A、To provide a monitoring mechanism for networks in switched environments.B、To manage VLANs across multiple switches.C、To prevent switching loops in networks with redundant switched paths.D、To segment a network into multiple collision domains.E、To prevent routing loops in networks.
ABC Company has 1500 managed devices and 15,000 end users on a campus network. LAN Management Solution (LMS) is being deployed as the network management application. What is the recommended number of network management server(s)?（）A、1B、2C、3D、4
What is a characteristic of ISL and 802.1q frame tagging in a switched LAN environment?（）A、They are used to find the best path through a network.B、They allow the exchange of filtering tables.C、They specify different implementations of the Spanning-Tree Protocol.D、They allow the exchange of routing tablesE、They provide inter-switch VLAN communication.
What does a router do?（）A、Routes traffic down alternative paths and connects the local-area network (LAN) to the wide- area network (WAN)B、Reads Media Access Control (MAC) addresses to forward messages to the correct location and connects the local-area network (LAN) to the wide-area network (WAN)C、Stores data on the network and connects the local-area network (LAN) to the wide-area network (WAN)D、Broadcasts data to all devices that are connected to it across the local-area network (LAN) and wide-area network (WAN)
pany uses MSTP within their switched LAN. What is the main purpose of Multiple Instance Spanning Tree Protocol （MSTP）？（）A、 To enhance Spanning Tree troubleshooting on multilayer switchesB、 To reduce the total number of spanning tree instances necessary for a particular topology C、 To provide faster convergence when topology changes occur in a switched networkD、 To provide protection for STP when a link is unidirectional and BPDUs are being sent but not receivedE、 None of the other alternatives apply
What functions do routers perform in a network?（）A、packet switchingB、access layer securityC、path selectionD、VLAN membership assignmentE、bridging between LAN segmentsF、microsegmentation of broadcast domains
In CiscoWorks LAN Management Solution， what are some of the examples of a managed device （sometimes called network elements）？ （Choose three.） （）A、 routersB、 LAN switchesC、 PBX switchesD、 TDM switchesE、 appliances
What is a Label-Switched Path?（）A、a traffic engineered pathB、another name for a Frame Relay PVCC、a bidirectional path through a networkD、a unidirectional path through a network
You have a DHCP server that runs Windows Server 2008. The DHCP server has two network connections named LAN1 and LAN2. You need to prevent the DHCP server from responding to DHCP client requests on LAN2. The server must continue to respond to non-DHCP client requests on LAN2. What should you do？ （）A、 From the DHCP snap-in， modify the bindings to associate only LAN1 with the DHCP serviceB、 From the DHCP snap-in， create a new multicast scopeC、 From the properties of the LAN1 network connection， set the metric value to 1D、 From the properties of the LAN2 network connection， set the metric value to 1
单选题What management tool could be used to provide centralized configuration， monitoring， and management in a network built on Cisco wireless LAN controllers and Lightweight APs？ （）ACiscoWorks Wireless LAN Solution Engine （WLSE）BCiscoWorks Wireless LAN Solution Engine （WLSE） ExpressCCisco Wireless Control System （WCS）DWireless Domain Services （WDS）EWLAN Controllers （WLC）
单选题You have a router running BGP for the MPLS network and OSPF for the local LAN network at the sales office. A route is being learned from the MPLS network that also exists on the OSPF local network.It is important that the router chooses the local LAN route being learned from the downstream switch running OSPF rather than the upstream BGP neighbor. Also，if the local OSPF route goes away，the BGP route needs to be used. What should be configured to make sure that the router will choose the LAN network as the preferred path？（）Astatic route needs to be addedBfloating static route needs to be addedCbgp backdoor commandDospf backdoor command
单选题pany uses MSTP within their switched LAN. What is the main purpose of Multiple Instance Spanning Tree Protocol （MSTP）？（）A To enhance Spanning Tree troubleshooting on multilayer switchesB To reduce the total number of spanning tree instances necessary for a particular topology C To provide faster convergence when topology changes occur in a switched networkD To provide protection for STP when a link is unidirectional and BPDUs are being sent but not receivedE None of the other alternatives apply
多选题What functions do routers perform in a network?（）Apacket switchingBaccess layer securityCpath selectionDVLAN membership assignmentEbridging between LAN segmentsFmicrosegmentation of broadcast domains
多选题What functions do routers perform in a network? (Choose two.)（）Apacket switchingBaccess layer securityCpath selectionDVLAN membership assignmentEbridging between LAN segmentsFmicrosegmentation of broadcast domains
单选题What is a Label-Switched Path?（）Aa traffic engineered pathBanother name for a Frame Relay PVCCa bidirectional path through a networkDa unidirectional path through a network
单选题In a switched environment, what does the IEEE 802.1Q standard describe?（）Athe operation of VTPBa method of VLAN trunkingCan approach to wireless LAN communicationDthe process for root bridge selectionEVLAN pruning vlan
单选题What is a characteristic of ISL and 802.1q frame tagging in a switched LAN environment?（）AThey are used to find the best path through a network.BThey allow the exchange of filtering tables.CThey specify different implementations of the Spanning-Tree Protocol.DThey allow the exchange of routing tablesEThey provide inter-switch VLAN communication.
单选题What is the purpose of the spanning-tree algorithm in a switched LAN?（）ATo provide a monitoring mechanism for networks in switched environments.BTo manage VLANs across multiple switches.CTo prevent switching loops in networks with redundant switched paths.DTo segment a network into multiple collision domains.ETo prevent routing loops in networks.