To increase the availability of an Advanced Replication environment， you can add a new master to a replication group without quiescing the group. This is achieved（）.A、Only when the new master site already has existing replication groups. B、By issuing a single command to create, populate, and activate the new master. C、When the master definition site is not the same for all of the master groups. D、Without impacting end users who are executing data manipulation language (DML) commands on the replicated tables.
To increase the availability of an Advanced Replication environment， you can add a new master to a replication group without quiescing the group. This is achieved（）.
- A、Only when the new master site already has existing replication groups.
- B、By issuing a single command to create, populate, and activate the new master.
- C、When the master definition site is not the same for all of the master groups.
- D、Without impacting end users who are executing data manipulation language (DML) commands on the replicated tables.
相关考题：
If there is an existing 802.11g WLAN at a site， which service can be provided without conducting anew site survey？（）A、Add a new 802.11a WLANB、Increase the Layer 2 and Layer 3 security of the WLANC、Increase the throughput for the wireless clientsD、Add new services （such as voice） over the WLAN
You are the network administrator for TestKing.com. The network consists of a single Active Directory domain named testking.com. The functional level of the domain is Windows 2000 native. A global group named Travelling contains 7,000 users. All of these users are assigned portable computers, which they will use to run new POSIX-compliant application. You create a global group named POSIX. For all 7,000 users in Travelling, you change the primary group to POSIX. Members of Travelling now report that they cannot access necessary domain resources. How should you solve this problem?（）A、Ensure that each site on your network is connected to at least one other site by a replication link that uses the SMTP protocol.B、Create two new global groups, Travelling1 and Travelling2. Place one half of the members of Travelling in each new group. Then place both new groups in Travelling.C、Remove all domain users from the Users group, and then add all domain users to the group again.D、Remove all users from Travelling. Change Travelling to a universal group. Add the same users to the new Travelling group.
A new router is added to an existing HSRP standby group. One of the existing routers is in anactive state， the other is in a standby state. Under what circumstance will the new router becomethe active router？（）A、The new router will become active immediately because it’s the newest router introduced intothe groupB、The new router can become active only when the existing active router and the existing standbyrouter become unavailableC、The new router has a lower priority valueD、The new router will never become active unless the existing active router becomes unavailableE、The new router has preempt configured and a higher priorityF、The new router has a higher priority value
Certkiller .com has a main office and branch office in another city. You are assigned to deploy and implement a Read-only Domain Controller （RODC） at the branch office. You deploy a RODC that runs Windows Server 2008. What should you do to ensure that the users at the branch office can log on to the domain using RODC（）A、Use Password Replication Policy on the RODCB、Add RODC to the main officeC、Deploy and configure a new bridgehead server in the branch officeD、Deploy and configure a Password Replication Policy on the RODC in the main office
You work as a network Exchange administrator at Company.com.The Company.com network currently consists of a single Active Directory forest containing a single site named KingSite1.The Company.com organization makes use of Microsoft Exchange Server 2010 as their messaging solution.Company.com has recently configured the mailbox server as members of a database availability group （DAG） with a public folder database. During the course of the business week you receive instruction from Company.com to create a new Active Directory site and install Exchange server in the site whilst ensuring the public folders are stored on servers in both sites. What should you do？（）A、You should consider having clustered continuous replication （CCR） configured on two servers in the new site.You should then have the replication settings for all public folder databases modified.B、You should consider having the standby continuous replication （SCR） configured on a server in the new site.You should then have the Enable-StorageGroupCopy cmdlet run from a server in the new site.C、You should consider having a public folder database created on a server in the new site.You should then have the replication settings for all public folders modified.D、You should consider having a public folder database created on a server in the new site.You should then have the set-DatabaseAvailabilityGroup cmdlet run from a server in the new site.
Certkiller .com boosts a main office and 20 branch offices. Configured as a separate site， each branch office has a Read-Only Domain Controller （RODC） server installed. Users in remote offices complain that they are unable to log on to their accounts. What should you do to make sure that the cached credentials for user accounts are only stored in their local branch office RODC server（）A、Open the RODC computer account security tab and set Allow on the Receive as permission only for the users that are unable to log on to their accountsB、Add a password replication policy to the main Domain RODC and add user accounts in the security groupC、Configure a unique security group for each branch office and add user accounts to the respective security group. Add the security groups to the password replication allowed group on the main RODC serverD、Configure and add a separate password replication policy on each RODC computer account
You are designing a site topology to meet the business and technical requirements. What should you do?（）A、Increase the replication interval between sites.B、Use SMTP as the transport protocol for replication.C、Create site links to represent the physical topology. D、Disable the Knowledge Consistency Checker (KCC) and manually configure site replication.
Your network contains an Active Directory domain. The domain contains two sites named Site1 and Site2. Site1 contains four domain controllers. Site2 contains a read-only domain controller （RODC）. You add a user named User1 to the Allowed RODC Password Replication Group. The WAN link between Site1 and Site2 fails. User1 restarts his computer and reports that he is unable to log on to the domain. The WAN link is restored and User1 reports that he is able to log on to the domain. You need to prevent the problem from reoccurring if the WAN link fails. What should you do（）A、Create a Password Settings object （PSO） and link the PSO to User1’s user account.B、Create a Password Settings object （PSO） and link the PSO to the Domain Users group.C、Add the computer account of the RODC to the Allowed RODC Password Replication Group.D、Add the computer account of User1’s computer to the Allowed RODC Password Replication Group.
You are designing a name resolution strategy for the retail outlets to ensure that the existing bandwidth is used efficiently. Which three actions should you perform？（）A、 Configure the DNS server service on the terminal servers as caching-only servers.B、 Configure multiple sites to have site links and set up a specific replication schedule.C、 Configure the default site to have the subnets of Atlanta and the branch offices.D、 Create a new DNS zone and configure zone transfers to name servers only.E、 Create an application partition to be used for DNSF、 Specify the scope of replication to be used for DNS
Your company has a main office and a branch office You deploy a read-only domain controller （RODC） that runs Microsoft Windows Server 2008 to the branch office You need to ensure that users at the branch office are able to log on to the domain by using the RODC What should you do（）A、Add another RODC to the branch officeB、Configure a new bridgehead server in the main officeC、Configure the Password Replication Policy on the RODCD、Decrease the replication interval for all connection objects by using the Actrve Directory Sites and Services console
Your network contains an Active Directory forest. The forest contains an Acitve Directory site for a remote office. The remote site contains a read-only domain controller （RODC）. You need to configure the RODC to store only the password of users in the remote site. What should you do（）A、Create a Paasword Settings object （PSO）.B、Modify the Partial-Attribute-Set attribute of the forest.C、Add the users accounts of the remote site users to the Allowed RODC Password Replication Group.D、Add the users accounts of users who are not in the remote site to the Denied RODC Password Replication Group.
Your company has three Active Directory domains in a single forest. You install a new Active Directory enabled application. The application ads new user attributes to the Active Directory schema. You discover that the Active Directory replication traffic to the Global Catalogs has increased. You need to prevent the new attributes from being replicated to the Global Catalog. You must achieve this goal without affecting application functionality. What should you do（）A、Change the replication interval for the DEFAULTIPSITELINK object to 9990.B、Change the cost for the DEFAULTIPSITELINK object to 9990.C、Make the new attributes in the Active Directory as defunct.D、Modify the properties in the Active Directory schema for the new attributes.
You have an Exchange Server 2010 organization that contains three Mailbox servers.All Mailbox servers are members of a database availability group （DAG） and have a public folder database.The Active Directory forest contains one site.You create a new site and install new Exchange Server 2010 servers in the site.You need to ensure that public folders are stored on servers in both sites.What should you do？（）A、Create a public folder database on a server in the new site. Modify the replication settings for all public foldersB、Create a public folder database on a server in the new site.Run the Set-DatabaseAvailabilityGroup cmdlet from a server in the new siteC、Configure clustered continuous replication （CCR） on two servers in the new site. Modify the replication settings for all public folder databasesD、Configure standby continuous replication （SCR） on a server in the new site. Run the Enable-StorageGroupCopy cmdlet from a server in the new site
Your network contains an Active Directory domain. The domain contains two sites named Site1 and Site2. Site1 contains four domain controllers. Site2 contains a read-only domain controller （RODC）. You add a user named User1 to the Allowed RODC Password Replication Group. The WAN link between Site1 and Site2 fails. User1 restarts his computer and reports that he is unable to log on to the domain. The WAN link is restored and User1 reports that he is able to log on to the domain. You need to prevent the problem from reoccurring if the WAN link fails. What should you do（）A、Create a Password Settings object （PSO） and link the PSO to User1’s user account.B、Create a Password Settings object （PSO） and link the PSO to the Domain Users group.C、Add the computer account of the RODC to the Allowed RODC Password Replication Group.D、Add the computer account of User1’s computer to the Allowed RODC Password Replication Group.
单选题Your network contains an Active Directory forest. The forest contains an Acitve Directory site for a remote office. The remote site contains a read-only domain controller （RODC）. You need to configure the RODC to store only the password of users in the remote site. What should you do（）ACreate a Paasword Settings object （PSO）.BModify the Partial-Attribute-Set attribute of the forest.CAdd the users accounts of the remote site users to the Allowed RODC Password Replication Group.DAdd the users accounts of users who are not in the remote site to the Denied RODC Password Replication Group.
单选题You are the network administrator for TestKing.com. The network consists of a single Active Directory domain named testking.com. The functional level of the domain is Windows 2000 native. A global group named Travelling contains 7,000 users. All of these users are assigned portable computers, which they will use to run new POSIX-compliant application. You create a global group named POSIX. For all 7,000 users in Travelling, you change the primary group to POSIX. Members of Travelling now report that they cannot access necessary domain resources. How should you solve this problem?（）AEnsure that each site on your network is connected to at least one other site by a replication link that uses the SMTP protocol.BCreate two new global groups, Travelling1 and Travelling2. Place one half of the members of Travelling in each new group. Then place both new groups in Travelling.CRemove all domain users from the Users group, and then add all domain users to the group again.DRemove all users from Travelling. Change Travelling to a universal group. Add the same users to the new Travelling group.
单选题Your company has three Active Directory domains in a single forest. You install a new Active Directory enabled application. The application ads new user attributes to the Active Directory schema. You discover that the Active Directory replication traffic to the Global Catalogs has increased. You need to prevent the new attributes from being replicated to the Global Catalog. You must achieve this goal without affecting application functionality. What should you do（）AChange the replication interval for the DEFAULTIPSITELINK object to 9990.BChange the cost for the DEFAULTIPSITELINK object to 9990.CMake the new attributes in the Active Directory as defunct.DModify the properties in the Active Directory schema for the new attributes.
单选题A new router is added to an existing HSRP standby group. One of the existing routers is in anactive state， the other is in a standby state. Under what circumstance will the new router becomethe active router？（）AThe new router will become active immediately because it’s the newest router introduced intothe groupBThe new router can become active only when the existing active router and the existing standbyrouter become unavailableCThe new router has a lower priority valueDThe new router will never become active unless the existing active router becomes unavailableEThe new router has preempt configured and a higher priorityFThe new router has a higher priority value
单选题You work as a network Exchange administrator at Company.com.The Company.com network currently consists of a single Active Directory forest containing a single site named KingSite1.The Company.com organization makes use of Microsoft Exchange Server 2010 as their messaging solution.Company.com has recently configured the mailbox server as members of a database availability group （DAG） with a public folder database. During the course of the business week you receive instruction from Company.com to create a new Active Directory site and install Exchange server in the site whilst ensuring the public folders are stored on servers in both sites. What should you do？（）AYou should consider having clustered continuous replication （CCR） configured on two servers in the new site.You should then have the replication settings for all public folder databases modified.BYou should consider having the standby continuous replication （SCR） configured on a server in the new site.You should then have the Enable-StorageGroupCopy cmdlet run from a server in the new site.CYou should consider having a public folder database created on a server in the new site.You should then have the replication settings for all public folders modified.DYou should consider having a public folder database created on a server in the new site.You should then have the set-DatabaseAvailabilityGroup cmdlet run from a server in the new site.
单选题Your network contains an Active Directory domain. The domain contains two sites named Site1 and Site2. Site1 contains four domain controllers. Site2 contains a read-only domain controller （RODC）. You add a user named User1 to the Allowed RODC Password Replication Group. The WAN link between Site1 and Site2 fails. User1 restarts his computer and reports that he is unable to log on to the domain. The WAN link is restored and User1 reports that he is able to log on to the domain. You need to prevent the problem from reoccurring if the WAN link fails. What should you do（）ACreate a Password Settings object （PSO） and link the PSO to User1’s user account.BCreate a Password Settings object （PSO） and link the PSO to the Domain Users group.CAdd the computer account of the RODC to the Allowed RODC Password Replication Group.DAdd the computer account of User1’s computer to the Allowed RODC Password Replication Group.
单选题Which statement correctly describes the function of Oracle9i Cache Fusion feature？（）AIt provides each session with its own view of the database at a different point in the past. BIt enables you to execute scalable applications on a clustered database without having to partition the users or the database tables. CIt lets you dynamically reassign memory in your database buffer cache to different block buffer sizes. DIt allows you to add new sites to multimaster replication environment without quiescing the master definition site.
单选题To increase the availability of an Advanced Replication environment， you can add a new master to a replication group without quiescing the group. This is achieved（）.AOnly when the new master site already has existing replication groups. BBy issuing a single command to create, populate, and activate the new master. CWhen the master definition site is not the same for all of the master groups. DWithout impacting end users who are executing data manipulation language (DML) commands on the replicated tables.
单选题Your network contains an Active Directory domain. The domain contains two sites named Site1 and Site2. Site1 contains four domain controllers. Site2 contains a read-only domain controller （RODC）. You add a user named User1 to the Allowed RODC Password Replication Group. The WAN link between Site1 and Site2 fails. User1 restarts his computer and reports that he is unable to log on to the domain. The WAN link is restored and User1 reports that he is able to log on to the domain. You need to prevent the problem from reoccurring if the WAN link fails. What should you do（）ACreate a Password Settings object （PSO） and link the PSO to User1’s user account.BCreate a Password Settings object （PSO） and link the PSO to the Domain Users group.CAdd the computer account of the RODC to the Allowed RODC Password Replication Group.DAdd the computer account of User1’s computer to the Allowed RODC Password Replication Group.
单选题Certkiller .com boosts a main office and 20 branch offices. Configured as a separate site， each branch office has a Read-Only Domain Controller （RODC） server installed. Users in remote offices complain that they are unable to log on to their accounts. What should you do to make sure that the cached credentials for user accounts are only stored in their local branch office RODC server（）AOpen the RODC computer account security tab and set Allow on the Receive as permission only for the users that are unable to log on to their accountsBAdd a password replication policy to the main Domain RODC and add user accounts in the security groupCConfigure a unique security group for each branch office and add user accounts to the respective security group. Add the security groups to the password replication allowed group on the main RODC serverDConfigure and add a separate password replication policy on each RODC computer account
单选题You are designing a site topology to meet the business and technical requirements. What should you do？（）A Increase the replication interval between sites，B Use SMTP as the transport protocol for replication.C Create site links to represent the physical topology.D Disable the Knowledge Consistency Checker （KCC） and manually configure site replication.
多选题You are designing a name resolution strategy for the retail outlets to ensure that the existing bandwidth is used efficiently. Which three actions should you perform?（）AConfigure the DNS server service on the terminal servers as caching-only servers.BConfigure multiple sites to have site links and set up a specific replication schedule.CConfigure the default site to have the subnets of Atlanta and the branch offices.DCreate a new DNS zone and configure zone transfers to name servers only.ECreate an application partition to be used for DNS.FSpecify the scope of replication to be used for DNS.
多选题You are designing a name resolution strategy for the retail outlets to ensure that the existing bandwidth is used efficiently. Which three actions should you perform？（）AConfigure the DNS server service on the terminal servers as caching-only servers.BConfigure multiple sites to have site links and set up a specific replication schedule.CConfigure the default site to have the subnets of Atlanta and the branch offices.DCreate a new DNS zone and configure zone transfers to name servers only.ECreate an application partition to be used for DNSFSpecify the scope of replication to be used for DNS