单选题A company is about to install a second network connect on with a new ISP. Which of the followingrouting protocols is the BEST choice?（）AIS-ISBBGPCOSPFDRIP
单选题
A company is about to install a second network connect on with a new ISP. Which of the followingrouting protocols is the BEST choice?（）
A
IS-IS
B
BGP
C
OSPF
D
RIP
参考解析
解析：
暂无解析
相关考题：
You are the administrator of your company's network. The network is configured as shown in the exhibit.You want to install Windows 2000 Professional on 10 non-PXE-compliant computers that are on the marketing segment of your network. You start one of the computers by using a RIS boot disk. However, you cannot connect to the RIS server.You verify that the existing client computers on the network can connect to network servers, including the RIS server. The network router does not support BOOTP, so existing client computers use manually configured TCP/IP addresses. You want to enable the computers to connect to the RIS server.What should you do?A．Add a computer running DHCP Relay Agent to the marketing segment.B．Add a computer running the network monitor driver to the marketing segment.C．Move the Windows 2000 Server computer running WINS to the marketing segment.D．Move the Windows 2000 Server computer running Active Directory to the marketing segment.
You are the administrator for your company's network. The network is configured as shown in the exhibit.You want to install Windows 2000 Professional on 20 new PXE-compliant computers on the marketing segment of your network. The new computers do not have operating systems installed.You create a RIS image. You load the image onto the RIS server. You then start the new computers.You find that the new computers cannot connect to the RIS server. You verify that the new computers cannot connect to the RIS server. You verify that the existing client computers in the network can connect to the network servers, including the RIS server. You want to enable the new computers to connect to the RIS server.What should you do?A．Add a Windows 2000 Server computer running WINS to the network.B．Add a Windows 2000 Server computer running DHCP to the network.C．Add the domain Everyone group to the RIS OS image security settings.D．Place the new computers on the same segment as the RIS server.
A PC cannot connect to the network. A network card was purchased without documentation ordriver discs. Which of the following is the BEST way to install it into this machine?() A. Download and install the driversB. Run Windows update to install driversC. Copy drivers to flash drive and installD. Purchase the disc online and install
A company is about to install a second network connect on with a new ISP. Which of the followingrouting protocols is the BEST choice?() A. IS-ISB. BGPC. OSPFD. RIP
Which of the following desdription is WRONG .about Wi-Fi? ( ).A.Any standard Wi~Fi device. will work anywhere in the world with global operative set of standaedsB.Now most laptops are built with wireless network adapters insideC.One can connect Wi-Fi devices in ad-hoc mode for client-to-client connections without a routerD.Communications between two devices need the involvement of an access point with Wi-Fi
Company.com has recently received a new p5-570 in the data center and intends to Micro-Partition the server. In which order should installation steps be taken？（）A、Connect to the network,power on the server,Micro-Partition the serverB、Connect to the HMC,power on the server,Micro-Partition the server,connect to the networkC、Power on server,connect to the network,Micro-Partition the server,connect to the HMCD、Power on the server,connect to the HMC,Micro-Partition the server,connect to the network
A company is installing IP phones. The phones and office computers connect to the same device. To ensure maximum throughput for the phone data, the company needs to make sure that the phone traffic is on a different network from that of the office computer data traffic. What is the best network device to which to directly connect the phones and computers, and what technology should be implemented on this device? (Choose two.)（）A、hubB、routerC、switchD、STPE、subinterfacesF、VLAN
A company is installing IP phones. The phones and office computers connect to the same devicE.To ensure maximum throughput for the phone data, the company needs to make sure that the phone traffic is on a different network from that of the office computer data traffiC.What is the best network device to which to directly connect the phones and computers, and what technology should be implemented on this device? （）A、hubB、routerC、switchD、STPE、subinterfacesF、VLAN
A PC cannot connect to the network. A network card was purchased without documentation ordriver discs. Which of the following is the BEST way to install it into this machine?（）A、Download and install the driversB、Run Windows update to install driversC、Copy drivers to flash drive and installD、Purchase the disc online and install
A company is about to install a second network connect on with a new ISP. Which of the followingrouting protocols is the BEST choice?（）A、IS-ISB、BGPC、OSPFD、RIP
Your company’s network includes client computers that run Windows 7. You design a wireless network to use Extensible Authentication Protocol-Transport Level Security （EAP-TLS）. The Network Policy Server has a certificate installed. Client computers are unable to connect to the wireless access points. You need to enable client computers to connect to the wireless network. What should you do？（）A、Configure client computers to use Protected Extensible Authentication Protocol-Microsoft Challenge Handshake Authentication Protocol version 2 （PEAP-MS-CHAP v2）.B、Configure client computers to use Protected Extensible Authentication Protocol-Transport Layer Security （PEAP-TLS）.C、Install a certificate in the Trusted Root Certification Authorities certificate store.D、Install a certificate in the Third-Party Root Certification Authorities certificate store.
You are 1 of 75 consultants employed by an IT services company named Contoso.com. As part of your job，you and other team members provide network support for over 150 businesses in your city. Your company is about to implement a business process in which consultants must connect to an application server on the Contoso.com network while working at customer premises. When connected tothe application server， consultants provide critical information about each assignment in the field. Toconnect to the Contoso.com application server， consultants are expected to use Remote DesktopConnection on customer computers running Windows XP or Windows Vista. You have been asked todetermine whether your company needs to purchase client access licenses （CALs） for Terminal Services. Which of the following options best suits the needs of your organization？（）A、Use Remote Desktop for Administration on the application server， and purchase per user CALs.B、Use Remote Desktop for Administration on the application server， but do not purchase any CALs.C、Install Terminal Services on the application server， and purchase per device CALs.D、Install Terminal Services on the application server， and purchase per user CALs.
You need to design a Security strategy for the wireless network at all resort locations.What should you do？（）A、Connect the wireless access points to a dedicated subnet. Allow the subnet direct access to the Internet，but not to the company network.Require company users to establish a VPN to access company resourcesB、Install Internet Authentication Service （IAS） on a domain controller.Configure the wireless access points to require IEEE 802.1x authenticationC、Establish IPSec policies on all company servers to request encryption from all computers that connect from the wireless IP networksD、Configure all wireless access points to require the Wired Equivalent Privacy （WEP） protocol for all connections. Use a Group Policy object （GPO） to distribute the WEP keys to all computers in the domain
All client computers on your company network run Windows 7 and are members of an Active Directory Domain Services domain. Employees using portable computers report that they get connected to a coffee shop wireless network from the company conference room. You need to ensure that the employees connect to the company wireless network by default from anywhere within the company premises. What should you do?（）A、Configure the Network authentication (Shared mode) setting.B、Apply a Wireless Network Policy to set the network type to WPA-PSK.C、Apply a Wireless Network Policy to automatically connect to the company wireless network.D、Apply a Wireless Network Policy to set the company wireless network as the preferred network.
You want to connect to your company network from your Windows 2000 Professional computer at home. You have an ISDN line that is used for internet connectivity. You create a VPN connection and are able to connect successfully to the company network. While connected to the company network, you are unable to access the Internet. What must you do so that you can access the Internet?（）A、Configure the ISDN connection to use SLIP instead of PPP.B、Select the Enable Internet Connection Sharing for this connection check box in the ISDN connection properties.C、Clear the Use default gateway on remote network check box.D、Install and configure the SAP Agent service.
Network topology exhibit: You are the administrator at ExamSheet.net. You use TCP/IP as the only protocol on your network. The network is configured as in the network topology exhibit. All existing computers and devices use 255.255.240.0 as the subnet mask. You install Windows 2000 Professional on a computer named ExamSheet2. You configure ExamSheet2 to have a TCP/IP address of 10.10.20.234, a default gateway of 10.10.20.1, a subnet mask of 255.255.0.0 and a WINS server address of 10.10.13.10. You cannot connect to shared resources on ExamSheetB by using its UNC name. You want ExamSheet2 to be able to connect to ExamSheetB. What should you do? （）A、Install a WINS server on the same segment as Company2B、Install and configure a DNS server and configure Company2 to use the DNS Server service.C、Configure Company2 with a default gateway address 10.10.13.1.D、Configure Company2 with a default gateway address of 10.10.30.1.E、Configure Company2 with a TCP/IP address of 10.10.20.234.
You are the network administrator for Company.You need to connect to Company’s network from your Windows 2000 Professional computer at home.You have a DSL line that is used for Internet connectivity. You create an L2TP virtual private network（VPN） connection and are able to connect successfully to Company’s network. While connected toCompany’s network， you are unable to access the Internet.You want to be able to access the Internet while connected to Company’s network.How should you configure the connection properties？（）A、Configure the DSL connection to use PPTP instead of L2TP. B、Enable Internet Connection Sharing for the DSL connection properties. C、CLEAR THE Use default gateway on remote network check box. D、Clear the Require data encryption check box.
You are the desktop administrator for your company. The company's network contains a RIS server, a DHCP server, and a DNS server. You need to install Windows XP Professional on a computer that does not have a CD-ROM drive. The computer has the following configuration: a Pentium III 1-GHz processor, a 5-GB hard disk, 128 MB of RAM, a modem in the first PCI slot ,an Ethernet card in the last ISA slot. You attempt to install Windows XP Professional on the computer by using a RIS bootable floppy disk. However, you are unable to connect to the RIS server. What should you do?（） A、Move the Ethernet card to the first ISA slot. B、Remove the Ethernet card and replace it with an Ethernet card that is PXE compliant. C、Share the RIS image on the RIS server. Create a network bootable floppy disk. Insert the floppy disk, and install Windows XP Professional from the share. D、Place the NDIS network drivers in the root directory of the RIS bootable floppy disk. Use the floppy disk to connect to the RIS server.
You are the network administrator for your company. Your network consists of a single Active Directory domain. All network servers run Windows Server 2003, and all client computers run Windows 2000 Professional. You install Windows Server 2003 with default settings on a new computer named Server1. You install and share several printers on Server1. You instruct all users to connect to these printers by using the address http://Server1/Printers. However, users report that they cannot connect to this address. You need to ensure that all users can connect to the printers by using HTTP. Which two actions should you perform?（） (Each correct answer presents part of the solution. Choose two.)A、Publish all shared printers that are installed on Server1.B、Create a virtual directory named Printers on Server1.C、Install IIS with default settings on Server1.D、Reshare all printers on Server1.E、Install the Internet Printing component of IIS.F、Type Net Start W3SVC at a command prompt.
单选题Your company has just upgraded its CATAGORY 5 Ethernet network from 10Mbps to 100Mbps. After the upgrade， the 20 Windows 2000 Professional computers in the marketing department can no longer connect to the network. The remaining 80 Windows 2000 computers in the company can connect， however. Your company uses NWLink as the only network protocol.You need to connect the computers in the marketing department to the network. What must you do？ （）AConfigure the NWLink frame type of the network adapters to be ethernet 802.3.BConfigure the NWLink frame type of the network adapters to be ethernet II.CReplace the network adapters with 10/100 BNC adapters.DReplace the network adapters with 10/100 UTP network adapters.
单选题You want to connect your Windows 2000 Professional computer to multiple TCP/IP subnets on your company’s network. Your computer currently has an ISA network adapter installed. You install a second ISA network adapter. After you restart your computer， you notice that the second ISA network adapter is not functioning. What should you do？（）ASet the driver signing option to block.BSet the driver signing option to ignore.CIn the computer’s BIOS， reserve an unused IRQ for ISA devices.DIn the Device Manager， configure the second ISA network adapter to use an unused IRQ.
单选题You install Windows 2000 Professional on your portable computer. You create a new dial up connection to connect to your company’s remote access server. You connect to the remote access server by using the dial up connection. You can connect to the servers on the same segment as the remote access server. You cannot access the shared resources that are on the remote segments from the remote access server. What should you do？ （）AConfigure the company remote access server to accept multilink connections.BConfigure the TCP/IP program for the dial up connection to disable IP header compression.CConfigure the TCP/IP properties for the dial up connection to use the default gateway on theremote network.DGrant your user account dial in permission on the company remote access server.
多选题A company is installing IP phones. The phones and office computers connect to the same device. To ensure maximum throughput for the phone data, the company needs to make sure that the phone traffic is on a different network from that of the office computer data traffic. What is the best network device to which to directly connect the phones and computers, and what technology should be implemented on this device (Choose two.)（）。AhubBrouterCswitchDSTPEsubinterfacesFVLAN
多选题A company is installing IP phones. The phones and office computers connect to the same devicE.To ensure maximum throughput for the phone data, the company needs to make sure that the phone traffic is on a different network from that of the office computer data traffiC.What is the best network device to which to directly connect the phones and computers, and what technology should be implemented on this device? （）AhubBrouterCswitchDSTPEsubinterfacesFVLAN
单选题You install a wireless router and disable the Service Set Identifier （SSID） broadcast feature. You need to configure your computer to connect to the wireless network. What should you do？ （）AClick the Connect to a network link， right-click the appropriate network， and then click the Connect option.BClick the View computers and devices link， right-click the wireless router， and then click the Enable option.CClick the Set up a connection or network link， and then click the Set up a wireless Ad hoc network option.DClick the Set up a connection or network link， and then click the Manually connect to a wireless network option.
单选题Company.com has recently received a new p5-570 in the data center and intends to Micro-Partition the server. In which order should installation steps be taken？（）AConnect to the network,power on the server,Micro-Partition the serverBConnect to the HMC,power on the server,Micro-Partition the server,connect to the networkCPower on server,connect to the network,Micro-Partition the server,connect to the HMCDPower on the server,connect to the HMC,Micro-Partition the server,connect to the network
单选题Network topology exhibit: You are the administrator at ExamSheet.net. You use TCP/IP as the only protocol on your network. The network is configured as in the network topology exhibit. All existing computers and devices use 255.255.240.0 as the subnet mask. You install Windows 2000 Professional on a computer named ExamSheet2. You configure ExamSheet2 to have a TCP/IP address of 10.10.20.234, a default gateway of 10.10.20.1, a subnet mask of 255.255.0.0 and a WINS server address of 10.10.13.10. You cannot connect to shared resources on ExamSheetB by using its UNC name. You want ExamSheet2 to be able to connect to ExamSheetB. What should you do? （）AInstall a WINS server on the same segment as Company2BInstall and configure a DNS server and configure Company2 to use the DNS Server service.CConfigure Company2 with a default gateway address 10.10.13.1.DConfigure Company2 with a default gateway address of 10.10.30.1.EConfigure Company2 with a TCP/IP address of 10.10.20.234.