An administrator needs to be able to restore a mksysb created on SERVER_A using a 4MM tape drive， to SERVER_B that only has an 8MM tape drive. There is an additional server that has a 4MM drive at /dev/rmt0 and an 8MM drive at /dev/rmt1. Which of the following procedures should be followed to convert from the 4MM to 8MM format（）A、tcopy /dev/rmt0.1 /dev/rmt1.1B、dd if=/dev/rmt0.1 of=/dev/rmt1.1C、tar -xvf /dev/rmt0.1tar -cvf /dev/rmt1.1D、cpio -ivcBDUM /dev/rmt0.1cpio -ovcBDUM. /dev/rmt1.1
An administrator needs to be able to restore a mksysb created on SERVER_A using a 4MM tape drive， to SERVER_B that only has an 8MM tape drive. There is an additional server that has a 4MM drive at /dev/rmt0 and an 8MM drive at /dev/rmt1. Which of the following procedures should be followed to convert from the 4MM to 8MM format（）
- A、tcopy /dev/rmt0.1 /dev/rmt1.1
- B、dd if=/dev/rmt0.1 of=/dev/rmt1.1
- C、tar -xvf /dev/rmt0.1tar -cvf /dev/rmt1.1
- D、cpio -ivcBDUM < /dev/rmt0.1cpio -ovcBDUM. >/dev/rmt1.1
相关考题：
Which of the following sequence of commands should be used to list the directories and files saved on a mksyst tape that has been rewound and placed in device rmt0?() A.tet1 -f /dev/rmt0 fsf 2; restore -xqvf /dev/rmt0B.tet1 -f /dev/rmt0.1 fsf2; restore -Tvf /dev/rmt0.1C.tet1 -f /dev/rmt0.1 fsf3; restore Tqvf /dev/rmt0.1D.tet1 -f /dev/rmt0.1 fsf3; restore -Tvf /dev/rmt0.1
A company has recently upgraded all backup hardware and media from DLT IV to LTO3 tapes and tape drives. Several weeks after the upgrade， the development team discovers a corruption in one of the application servers and must restore from one of the DLT IV tapes. Which of the following steps arenecessary for the server administrator to use these tapes？（）A、 Reformat the DLT IV tape in LTO3 format. Load the tape.B、 Install the DLT IV driver on the LTO3 drive. Load the tape.C、 Load the DLT IV tape into the LTO3 drive.D、 Replace the LTO3 drive with a DLT IV tape drive. Load the tape.
A SAN attached production file server is required to be backed up nightly according to company policy. Recently the data to be backed up has increased to approximately 4TB. Currently, the server has a single attached LTO2 tape drive. Which of the following should the server administrator do to provide enough backup capacity for the nightly job?（）A、Replace the backup software with a more efficient application.B、Reduce the amount of data to be backed up.C、Replace the LTO2 tape drive with an LTO3 tape drive.D、Replace the single tape drive with a tape library
Company.com wants to create four partitions on a pSeries p5-570 8-way with one SCSI PCI adapter connected to an external LTO tape drive. The partitions are to be created from an existing system image backup tape. Which of the following actions will enable the creation of the partitions with minimal intervention？（）A、Install a VIO partition to share the tape drive.B、Purchase three external SCSI adapters and physically move the tape drive when needed.C、Create the partition definitions with the SCSI adapter as a desired resource and use DLPAR commands to move the tape drive.D、Create the partition definitions with the SCSI adapter as a required resource for all partitions and use DLPAR commands to move the tape drive.
A system administrator has a failed disk drive that is mirrored to another disk drive. They successfully removed the logical volume copies off of the failed disk drive. Which of the following commands should be used to remove the failed disk drive from the volume group？（）A、chvgB、rmdevC、reducevgD、exportvg
A support specialist started to apply an APAR on a system by inserting the tape into the tape drive， and loaded the fix using smitty installp. The following error message is displayed： tape not in backup format Which of the following will resolve this problem？（）A、Change density setting to 2B、Set tape device to /dev/rmt0C、Set block size to 0 for variableD、Enable compression on tape device
A server has a single failed hard drive in an array that is accessed through a hot plug backplane to ease replacement of failed drives. After replacing the drive several times， each of the replacement drives failed to power up and rebuild as the failed drive. Which of the following is the MOST likely cause of the failures？（）A、 The backplane has failed and needs to be replaced.B、 The array must be disbanded and recreated from a backup source to recognize the replacement drive.C、 There is a conflict with the optical drive on the server.D、 The server power supply is failing and not providing enough power for all the drives.
A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables areconnected， the drive has power， and the drive shows up in Device Manager； however， the My Computerwindow does not show the drive that was previously working and formatted with NTFS. Which of the following would be the FIRST step in regaining access to the drive？ （）A、 Reformat the NTFS partition.B、 Recreate the partition that was deleted.C、 Rewrite the MBR.D、 Run a check disk on the drive.
A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables are connected, the drive has power, and the drive shows up in Device Manager; however, the My Computer window does not show the drive that was previously working and formatted with NTFS. Which of the following would be the FIRST step in regaining access to the drive?（）A、Reformat the NTFS partition.B、Recreate the partition that was deleted.C、Rewrite the MBR.D、Run a check disk on the drive
An administrator is up grading the back up server from a single tape drive to a SCSI tape library. The library has been unpackaged， mounted， and the library drivers installed. Which of the following items should the administrator have to connect the device to the backup server？（）A、 SCSI cableB、 SCSI interface adapter on the tape libraryC、 SCSI termination card on the serverD、 iSCSI cable
An administrator has added a new hard drive to a server that is running out of space on its C Drive and is experiencing slow performance. The administrator needs to free up space on the C Drive.Which of the following is the BEST action for the administrator to take to free up space on the drive？（）A、Move the page file to the new drive.B、Copy the system32 directory to the new drive.C、Convert the C drive to a basic disk.D、Setup a software RAID to mirror the C drive.
A SAN attached production file server is required to be backed up nightly according to company policy.Recently the data to be backed up has increased to approximately 4TB. Currently， the server has a single attached LTO2 tape drive. Which of the following should the server administrator do to provide enough backup capacity for the nightly job？ （）A、 Replace the backup software with a more efficient application.B、 Reduce the amount of data to be backed up.C、 Replace the LTO2 tape drive with an LTO3 tape drive.D、 Replace the single tape drive with a tape library.
A server has 500GB of data that must be backed up nightly. The administrator has upgraded the oldLTO2 drive to an LTO3， but the data still will not fit on a single tape. Which of the following additional stepsshould the administrator perform to accommodate the data？（）A、 Enable compression on the new driveB、 Reformat all tapesC、 Delete unnecessary system filesD、 Purchase LTO3 tapes for use in the new driveE、 Purchase new backup software
An administrator has replaced a faulty drive in a server using software RAID. The drive needs to now be partitioned before being added back to the array. Which of the following tools should the administrator use to accomplish this？（）A、chkdskB、mountC、fsckD、diskpart
A System p administrator has an application that has the data in volume group appvg. Which of the following commands will back up the contents of appvg to the tape in /dev/rmt0 and check for any read errors （）A、savevg -mf /dev/rmt0 appvgB、savevg -cvf /dev/rmt0 appvgC、savevg -vf /dev/rmt0 appvgD、savevg -f /dev/rmt0 -V appvg
A System p administrator is attempting to restore some files from a backup tape. The restore failed. The system administrator suspects the block size of the tape drive is incorrect. Which of the following commands can be used to determine the block size of the backup tape （）A、ddB、tarC、cpioD、restore
A system administrator is attempting to restore some files from a backup tape. The restore failed. The system administrator suspects the block size of the tape drive is incorrect. Which of the following commands can be used to determine the block size of the backup tape？（）A、ddB、tarC、cpioD、restore
A client has an existing Logical Partition (LPAR) on a p650 running AIX 5.2 and will be porting this LPAR to a p5 590. A mksysb has been run to tape, and a compatible tape drive is available and allocated to the target LPAR on the p5 590. What additional resource needs to be available on the p5 590?（）A、A CD or DVD with installation mediaB、An internal SCSI adapter in the target LPARC、An Ethernet adapter for access to an FTP serverD、Advanced Power Virtualization feature of the p5 590
Which of the following sequence of commands should be used to list the directories and files saved on a mksyst tape that has been rewound and placed in device rmt0?（）A、tet1 -f /dev/rmt0 fsf 2; restore -xqvf /dev/rmt0B、tet1 -f /dev/rmt0.1 fsf2; restore -Tvf /dev/rmt0.1C、tet1 -f /dev/rmt0.1 fsf3; restore Tqvf /dev/rmt0.1D、tet1 -f /dev/rmt0.1 fsf3; restore -Tvf /dev/rmt0.1
A system administrator has an application that has the data in volume group appvg. Which of the following commands will back up the contents of appvg to the tape in /dev/rmt0 and check for any read errors？（）A、savevg -mf /dev/rmt0 appvgB、savevg -cvf /dev/rmt0 appvgC、savevg -xvf /dev/rmt0 appvgD、savevg -f /dev/rmt0 -V appvg
Which of the following commands will remove the hardware definition of the tape drive rmt0 from a system？（）A、rm /dev/rmt0B、rmdel -s rmt0C、rmdev -dl rmt0D、tctl -f /dev/rmt0 erase
单选题A SAN attached production file server is required to be backed up nightly according to company policy.Recently the data to be backed up has increased to approximately 4TB. Currently， the server has a single attached LTO2 tape drive. Which of the following should the server administrator do to provide enough backup capacity for the nightly job？ （）A Replace the backup software with a more efficient application.B Reduce the amount of data to be backed up.C Replace the LTO2 tape drive with an LTO3 tape drive.D Replace the single tape drive with a tape library.
单选题A System p administrator is attempting to restore some files from a backup tape. The restore failed. The system administrator suspects the block size of the tape drive is incorrect. Which of the following commands can be used to determine the block size of the backup tape （）AddBtarCcpioDrestore
单选题An administrator is up grading the back up server from a single tape drive to a SCSI tape library. The library has been unpackaged， mounted， and the library drivers installed. Which of the following items should the administrator have to connect the device to the backup server？（）A SCSI cableB SCSI interface adapter on the tape libraryC SCSI termination card on the serverD iSCSI cable
单选题A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables areconnected， the drive has power， and the drive shows up in Device Manager； however， the My Computerwindow does not show the drive that was previously working and formatted with NTFS. Which of the following would be the FIRST step in regaining access to the drive？ （）A Reformat the NTFS partition.B Recreate the partition that was deleted.C Rewrite the MBR.D Run a check disk on the drive.
单选题A system administrator is attempting to restore some files from a backup tape. The restore failed. The system administrator suspects the block size of the tape drive is incorrect. Which of the following commands can be used to determine the block size of the backup tape？（）AddBtarCcpioDrestore
单选题A company has recently upgraded all backup hardware and media from DLT IV to LTO3 tapes and tape drives. Several weeks after the upgrade， the development team discovers a corruption in one of the application servers and must restore from one of the DLT IV tapes. Which of the following steps arenecessary for the server administrator to use these tapes？（）A Reformat the DLT IV tape in LTO3 format. Load the tape.B Install the DLT IV driver on the LTO3 drive. Load the tape.C Load the DLT IV tape into the LTO3 drive.D Replace the LTO3 drive with a DLT IV tape drive. Load the tape.