单选题During the installation of a cluster， the non-IP network failed. The cause was a connector that was Not properly secured. The customer wants a better notification method in the event that the non-IP network fails in the future. How could customization of the cluster be accomplished？（）A Customize the node up event script to send an email to the operator.B Have HACMP send mail when the non-IP network fails by customizing the RG_MMOVE event script.C Change the network module to be slower so that a temporary failure of the non-IP network would not report an error.D Use snmp or clinfo to monitor the status of the non-IP network and dispatch some type of warning message.
单选题
During the installation of a cluster， the non-IP network failed. The cause was a connector that was Not properly secured. The customer wants a better notification method in the event that the non-IP network fails in the future. How could customization of the cluster be accomplished？（）
A
Customize the node up event script to send an email to the operator.
B
Have HACMP send mail when the non-IP network fails by customizing the RG_MMOVE event script.
C
Change the network module to be slower so that a temporary failure of the non-IP network would not report an error.
D
Use snmp or clinfo to monitor the status of the non-IP network and dispatch some type of warning message.
参考解析
解析：
暂无解析
相关考题：
After a technician replaces a laptop display, the technician now notices that the wireless no longer works. Which of the following would be the MOST likely cause?() A. The wireless switch was damaged during the display installation.B. The network card has failed.C. The new display is interfering with the wireless signal.D. The antenna connector was not reconnected.
A customer has just received three enterprise systems that support a total of 48 LPARs. Which installation method expedite the process?() A.Network installation managerB.Boot from installation mediaC.A migration installD.Copy the system using the HMC
After a technician replaces a laptop display, the technician now notices that the wireless no longer works. Which of the following would be the MOST likely cause？（）A、The wireless switch was damaged during the display installation.B、The network card has failed.C、The new display is interfering with the wireless signal.D、The antenna connector was not reconnected.
A customer has a requirement to build a 4 node cluster. Disk heartbeating will be used as the non-IP network.What is the maximum number of disk heartbeat point-to-point links one would need to implement in order toachieve the highest level of availability？（）A、4B、6C、8D、12
During normal cluster processing in a five-node cluster，one of the nodes unexpectedly crashes. A review of the system dump indicates that a DMS timeout has occurred. The cluster is configured to use disk heartbeats as a Point-to-Point network. What should be done to address the problem with this configuration？（） A、 More disk should be added to the disk heartbeat network，allowing more paths for heartbeats.B、 An RS232 network is required to supply a more robust non-IP network when disk heartbeating is implemented.C、 The network tunable parameters should be changed to allow more missed heartbeats since the disks may be heavily used.D、 An error notification method is required to determine the action to take in response to a failure of the disk heartbeat.
When deploying IPCC Express 4.0 for the first time, when and where is the licensing of the customer specified? （）A、during Installation Cluster Setup, in the CRS Installer B、after installation, during first-time login, in CRS Application Administration C、after installation, in CRS License Update Utility D、during Installation Server Setup, in the CRS Installer
A network consultant is asked to set up a wireless network in a home. The home user wants the wireless network to be available in every comer of the house. Which of the following additional information will the technician need to determine the equipment for the installation? （）(Select TWO)A、The length of the houseB、How many rooms are in the houseC、How many users will be using the wireless networkD、The building material of the houseE、The cost of the house
During system boot, rootvg fails to vary on, causing an LED code of 0552. What is the most likely cause for rootvg not varying on?（）A、Missing blvB、Network problemC、Wrong boot tableD、Corrupted file system
During the initial cluster design，a disk heartbeat，Point-to-Point non-IP network is being planned as part of a three-node cluster implementation. The disk environment will use LVM mirroring for disk redundancy. The volume groups will be created as Enhanced Concurrent Capable. To facilitate disk heartbeating，how many disks per node and how many networks will be required？（） A、 One disk per node，one networkB、 Two disks per node，one networkC、 Two disks per node，six networksD、 Two disks per node，three networks
A cluster administrator is trying to configure tmssa for the non-IP network. Having installed the devices.ssa.tm.rte fileset， what is the next step that must be performed to create the target mode devices？（） A、 Reboot each cluster node.B、 Change the ssa node number to a non-zero value.C、 Change the SSAR device state from defined to available.D、 Run the cfgmgr process on each node to create the target mode devices.
The Cluster Administrator wants to use disk heartbeats as a non-IP network. What Volume Group consideration must be accounted for prior to configuring disk heartbeats？（） A、 The Volume Group major number must be the same on all nodes.B、 The Shared Volume Group must be created with the Big VG format.C、 The Volume Group must be created as Enhanced Concurrent Capable.D、 The "t factor" must be doubled to create the reserved area for disk hearbeats.
While executing a Cluster Test Plan， the administrators realize that they will need to email the Operations and network on-call staff in the event of a network outage. What can be done to alert the on-call staff of network failures？（） A、 Customize clstat to send a mail message.B、 Customize an Event Notification method.C、 Customize an Error Notification method.D、 Customize clinfo to send an SNMP trap.
A customer has just received three enterprise systems that support a total of 48 LPARs. Which installation method expedite the process?（）A、Network installation managerB、Boot from installation mediaC、A migration installD、Copy the system using the HMC
A system administrator wants to ensure that the cluster will failover if quorum is lost for appAvg in RG1 whichis mirrored between hdisk3 and hdisk5. Automatic error notification has been configured in this cluster. Which of the following actions should be usedto test that the cluster fails over correctly when quorum is lost for appAvg？（）A、Emulate the errpt entry from the HACMP Error Notification menuB、Execute a custom test procedure from the HACMP Cluster Test Tool menuC、Emulate the LVM_SA_QUORCLOSE event from the HACMP Event Emulation menuD、Execute the automated test procedure from the HACMP Cluster Test Tool menu
An administrator has had a request from the data center for method to monitor the status of an HACMP cluster. The monitoring software environment currently used is not compatible with SNM at this time， and there is not time to crate a new tool. There is also a restriction that the data center personnel not be allowed to login to the HACMP cluster nodes. What method will provide the solution for customer？（） A、 The clstat.cgi program will provide a solution.B、 The customer must install Tivoli with the HACMP plugin for monitoring the cluster.C、 The clinfo program included in the HACMP distribution will solve the monitoring issues.D、 Customize the cluster to send error notifications for every event to an email at the network control center.
During the installation of a cluster， the non-IP network failed. The cause was a connector that was Not properly secured. The customer wants a better notification method in the event that the non-IP network fails in the future. How could customization of the cluster be accomplished？（） A、 Customize the node up event script to send an email to the operator.B、 Have HACMP send mail when the non-IP network fails by customizing the RG_MMOVE event script.C、 Change the network module to be slower so that a temporary failure of the non-IP network would not report an error.D、 Use snmp or clinfo to monitor the status of the non-IP network and dispatch some type of warning message.
A cluster indicates that a remote site has failed. What facilities exist in HACMP/XD://HAGeo to ensure that the failure is not just a TCP/IP communication failure？（） A、 Electronic Service Agent software provides a redundant heartbeat between sites.B、 A non-IP network and Dial Back Fail Safe provide redundant heartbeats between sites.C、 The GeoMirror Devices provide a link validation facility that guarantees the validity between sites.D、 The Site Notification Daemon maintains a heartbeat between sites via short haul Modems/line drivers and dark fibre.
单选题A customer has a requirement to build a 4 node cluster. Disk heartbeating will be used as the non-IP network.What is the maximum number of disk heartbeat point-to-point links one would need to implement in order toachieve the highest level of availability？（）A4B6C8D12
单选题The Cluster Administrator wants to use disk heartbeats as a non-IP network. What Volume Group consideration must be accounted for prior to configuring disk heartbeats？（）A The Volume Group major number must be the same on all nodes.B The Shared Volume Group must be created with the Big VG format.C The Volume Group must be created as Enhanced Concurrent Capable.D The t factor must be doubled to create the reserved area for disk hearbeats.
单选题During the initial cluster design，a disk heartbeat，Point-to-Point non-IP network is being planned as part of a three-node cluster implementation. The disk environment will use LVM mirroring for disk redundancy. The volume groups will be created as Enhanced Concurrent Capable. To facilitate disk heartbeating，how many disks per node and how many networks will be required？（）A One disk per node，one networkB Two disks per node，one networkC Two disks per node，six networksD Two disks per node，three networks
单选题An administrator has had a request from the data center for method to monitor the status of an HACMP cluster. The monitoring software environment currently used is not compatible with SNM at this time， and there is not time to crate a new tool. There is also a restriction that the data center personnel not be allowed to login to the HACMP cluster nodes. What method will provide the solution for customer？（）A The clstat.cgi program will provide a solution.B The customer must install Tivoli with the HACMP plugin for monitoring the cluster.C The clinfo program included in the HACMP distribution will solve the monitoring issues.D Customize the cluster to send error notifications for every event to an email at the network control center.
单选题A cluster indicates that a remote site has failed. What facilities exist in HACMP/XD://HAGeo to ensure that the failure is not just a TCP/IP communication failure？（）A Electronic Service Agent software provides a redundant heartbeat between sites.B A non-IP network and Dial Back Fail Safe provide redundant heartbeats between sites.C The GeoMirror Devices provide a link validation facility that guarantees the validity between sites.D The Site Notification Daemon maintains a heartbeat between sites via short haul Modems/line drivers and dark fibre.
单选题A system administrator wants to ensure that the cluster will failover if quorum is lost for appAvg in RG1 whichis mirrored between hdisk3 and hdisk5. Automatic error notification has been configured in this cluster. Which of the following actions should be usedto test that the cluster fails over correctly when quorum is lost for appAvg？（）AEmulate the errpt entry from the HACMP Error Notification menuBExecute a custom test procedure from the HACMP Cluster Test Tool menuCEmulate the LVM_SA_QUORCLOSE event from the HACMP Event Emulation menuDExecute the automated test procedure from the HACMP Cluster Test Tool menu
单选题After a technician replaces a laptop display, the technician now notices that the wireless no longer works. Which of the following would be the MOST likely cause？（）AThe wireless switch was damaged during the display installation.BThe network card has failed.CThe new display is interfering with the wireless signal.DThe antenna connector was not reconnected.
单选题While executing a Cluster Test Plan， the administrators realize that they will need to email the Operations and network on-call staff in the event of a network outage. What can be done to alert the on-call staff of network failures？（）A Customize clstat to send a mail message.B Customize an Event Notification method.C Customize an Error Notification method.D Customize clinfo to send an SNMP trap.
单选题A cluster administrator is trying to configure tmssa for the non-IP network. Having installed the devices.ssa.tm.rte fileset， what is the next step that must be performed to create the target mode devices？（）A Reboot each cluster node.B Change the ssa node number to a non-zero value.C Change the SSAR device state from defined to available.D Run the cfgmgr process on each node to create the target mode devices.
单选题During normal cluster processing in a five-node cluster，one of the nodes unexpectedly crashes. A review of the system dump indicates that a DMS timeout has occurred. The cluster is configured to use disk heartbeats as a Point-to-Point network. What should be done to address the problem with this configuration？（）A More disk should be added to the disk heartbeat network，allowing more paths for heartbeats.B An RS232 network is required to supply a more robust non-IP network when disk heartbeating is implemented.C The network tunable parameters should be changed to allow more missed heartbeats since the disks may be heavily used.D An error notification method is required to determine the action to take in response to a failure of the disk heartbeat.