单选题A customer requires an 8-way 16GB AIX system. They are evaluating the following three systems： ？ p5-570 ？ p5-570 Express ？ p650 The pSeries technical specialist has been asked to explain the pros and cons of the three solutions. What information will help the customer decide on the best solution for their environment？（）AThe p5-570 Express can support DDR2 memory.BThe p650 and p5-570 Express provide faster processors.CThe p5-570 Express is limited to eight 1.5GHz processors.DNeither the p5-570 nor the p5-570 Express supports Capacity on Demand.
单选题
A customer requires an 8-way 16GB AIX system. They are evaluating the following three systems： ？ p5-570 ？ p5-570 Express ？ p650 The pSeries technical specialist has been asked to explain the pros and cons of the three solutions. What information will help the customer decide on the best solution for their environment？（）
A
The p5-570 Express can support DDR2 memory.
B
The p650 and p5-570 Express provide faster processors.
C
The p5-570 Express is limited to eight 1.5GHz processors.
D
Neither the p5-570 nor the p5-570 Express supports Capacity on Demand.
参考解析
解析：
暂无解析
相关考题：
What is one reason you might recommend a solution using only autonomous access points to a customer？ （）A、 The customer requires Layer 3 roaming.B、 The customer requires immediate wire line integration with a catalyst 6500 switch.C、 The customer needs an outdoor-ready access point.D、 The customer wants the option to migrate to LWAPP.
A customer is considering multiple options for a particular set of workloads on AIX v5.2. They need to run ten identical LPARS， each containing four fibre cards， two 2-port Ethernet cards， and one SCSI card as well as two internal boot disks. They want the LPARS to be split across two physical systems for redundancy purposes； cost is an issue. They need a total of approximately 40 rPerf for all ten workloads. Which of the following solutions best fits these needs？（）A、2 x p655 1.7ghz 8-way servers （21.87 rPerf each）B、2 x p670 1.5ghz 8-way servers （24.18 rPerf each）C、2 x p690 1.7ghz 8-way servers （27.11 rPerf each）D、2 x p650 1.45ghz 8-way servers （18.67 rPerf each）
A customer has an 8-way p5-570 with eight internal disk drives and AIX 5.2. Which of the following must be added， if anything， to the configuration to support four LPARs， assuming each LPAR requires twodisk drives？（）A、7311-D20 drawer with four disksB、Upgrade to AIX 5.3C、Fiber adapters to attach to SAND、Nothing
Company.com has ordered an 8-way p5-570 and plans to deploy four AIX 5L v5.3 LPARs. The pre-installation system design has all eight processors being placed in the shared processor pool， and four Micro-Partitions being assigned resources from the pool. Prior to the implementation of the system， the customer informs the technical specialist that one of the applications is only supported on AIX 5L 5.2. Which of the following changes to the system design should the technical specialist make to accommodate this change？（）A、Create all the partitions as AIX 5.2， each having two dedicated processors.B、Purchase a system with two additional processors that can be assigned to the AIX 5.2 Partition.C、Specify an AIX 5.2 partition using dedicated processors， reducing the number of processors in the shared pool.D、Use the virtual I/O server to manage the disks and network connections removing the need for different levels of device drivers.
A customer has a failing HBA adapter and needs to identify the location of the adapter. Which of the following AIX commands should the specialist recommend the customer review？（）A、rmdevB、chdevC、drslotD、cfgmgr
A customer needs a new Microsoft Windows 2003 Server. They are running an application that requires substantial memory. They would like a rack mountable system， which will support four Xeon processors with 2MB of L3 cache. Which of the following is the minimum configuration to satisfy the customer’s requirements？（）A、x445 with four Xeon MP processors and 8GB of memoryB、x445 with four Xeon MP processors and 16GB of memory in a single SMP moduleC、x445 with four Xeon DP processors and 16GB of memory in a single SMP moduleD、x445 with two SMP modules each containing two Xeon DP processors and 8GB of memory
A customer requires an 8-way 16GB AIX system. They are evaluating the following three systems： ？ p5-570 ？ p5-570 Express ？ p650 The pSeries technical specialist has been asked to explain the pros and cons of the three solutions. What information will help the customer decide on the best solution for their environment？（）A、The p5-570 Express can support DDR2 memory.B、The p650 and p5-570 Express provide faster processors.C、The p5-570 Express is limited to eight 1.5GHz processors.D、Neither the p5-570 nor the p5-570 Express supports Capacity on Demand.
New AIX systems arrive without a CDROM drive. All systems do not have the system hardware configuration. Which of the following options is the most appropriate way to install AIX on the systems?（）A、Install CDROM drives or tape drives on the systems because that is the only way to install AIX.B、Install one system. Take a mksysb from the first system and resotre the mksysb to the remaining systems.C、Install one system. Mirror rootvg onto a disk from each of the remaining systems.D、Setup and NIM master and resources.
A customer requires management capabilities for installed pSeries systems via a Microsoft Windows system. Which of the following should be considered？（）A、TSMB、PSSPC、WebSMD、LoadLeveler
A p5-570 8-way 32GB system has been proposed to a customer as a new test system with four LPARs. The current applications are certified on AIX 5.2 but not yet on AIX 5.3. The customer wants to understand the advantages and disadvantages of this solution versus a pair of 4-way p5-550s with 16GB each in testing their current applications. Which of the following points should the pSeries technical specialist highlight？（）A、The p5-570 would save rack space over a pair of p5-550 servers.B、The p5-570 allows for more CPU and memory resources to be dynamically allocated to any LPAR for performance testing.C、The p5-570 can only be upgraded to 64GB of RAM without replacing memory.D、The p5-570 supports advanced features such as Micro-Partitioning and Virtual I/O allowing more LPARs of the customer’s applications with fewer processors and fewer I/O adapters.
A customer requires two 12X loops on their new POWER7 system. What is the smallest system that will support two loops?（）A、Power 710B、Power 720C、Power 730D、Power 740
A customer needs a new database server. The database application has a high memory overhead but does not benefit from 8-way processing. They would like a rack mountable system， which will support four Xeon processors with 512KB of L2 cache and 16GB of main system memory. Which of the following will satisfy the customer’s requirements？（）A、x445 with four Xeon DP processors and 16GB of memory in a single SMP moduleB、x445 with four Xeon MP processors and 16GB of memory in a single SMP moduleC、x445 with two SMP modules each containing two Xeon DP processors and 8GB of memoryD、x445 with two SMP modules each containing two Xeon MP processors and 8GB of memory
Which of the following environments is most closely addressed by the N series N3600?（）A、a customer that requires block level storage B、a customer that requires CIFS and AIX NFS environments C、a customer that requires good scalability and performance D、a customer that needs to consolidate multiple storage controllers under a single interface
The account team designed a p5-570 solution to strategically position the customer for future IBM announcements. The customer was dissatisfied upon implementing the solution. An AIX v5.1 partition was added to the requirements halfway through the solution design process and it was not considered in the final design. What should the pSeries technical specialist have done to prevent this situation？（）A、Submitted an RPQ （Request for Quote） for AIX v5.1 support on a p5-570B、Designed a p670 because it supports AIX 5.1 partitionsC、Initially designed a solution supporting AIX 5.1 partitionsD、Gained customer approval for the final design prior to ordering the system
A customer runs an application on a supported 8-way x445. The customer needs to monitor operations and wants to be alerted when problems arise. Which TWO of the following can be configured in IBM Director Base Pack to monitor the customer’s operations？（）A、Fan operationB、Bottleneck analysisC、Power supply operationsD、Planned versus unplanned outagesE、Application predictive failure analysis
A customer has a requirement for a single AIX LPAR to be highly available. The customer only has enough funding to purchase a single system. Which would be the most critical option to mitigate AIX availability？（）A、Dual power supplies.B、Twice the amount of disk.C、Two dual-port LHEA adapters.D、Two dual-port fibre channel adapters.
Companycom tells the technical sales specialist that recent announcements state that virtual lan in the datacenter is the best option. The customer wants to use interpartition communication to save on adapters and increase performance. The systems are going to have shared and dedicated processor partitions. Some of the partitions will be running AIX 5.2 and some will be running AIX 5.3. The second p5 590 will be running a mixture of AIX 5.3 and Linux partitions with 2.6 kernel. What limitations of vlan/interpartition communication should be discussed with this customer?（）A、Virtual Ethernet uses the system processors for all communication functions instead of offloading that load to processors on network adapter cards. Virtual Ethernet is supported on AIX 5L and Linux 2.5 and above. B、Virtual Ethernet can be used within groups of shared OR groups of dedicated processor partitions, but not both simultaneously. Virtual Ethernet comes with AIX 5L, and is supported in AIX 5.2 or AIX 5.3 partitions, but not Linux. C、Virtual Ethernet can be used in both shared and dedicated processor partitions. Virtual Ethernet can run in an AIX 5.3 or Linux 2.6 Kernel, but not AIX 5.2 partitions. Virtual Ethernet can only connect partitions within a single system. D、Virtual Ethernet uses the system processors for all communication functions instead of offloading that load to processors on network adapter cards. Virtual Ethernet can connect partitions between systems if the HMC is shared between systems.
A customer has a pSeries that needs to be upgraded from AIX Version 5.1 to AIX Version 5.2. The customer wants to retain /etc/passwd. Which of the following installation types should be used？（）A、Preservation InstallB、Retention InstallC、Overwrite InstallD、Migration Install
单选题A customer requires an 8-way 16GB AIX system. They are evaluating the following three systems： ？ p5-570 ？ p5-570 Express ？ p650 The pSeries technical specialist has been asked to explain the pros and cons of the three solutions. What information will help the customer decide on the best solution for their environment？（）AThe p5-570 Express can support DDR2 memory.BThe p650 and p5-570 Express provide faster processors.CThe p5-570 Express is limited to eight 1.5GHz processors.DNeither the p5-570 nor the p5-570 Express supports Capacity on Demand.
单选题Company.com with limited AIX skills has purchased a p5-520 2-way which will run Micro-Partitions. To reduce the initial cost of purchase， the customer will be sharing the system resources using a VIO server. The customer is concerned about managing the installation of the operating system. Which of the following should the customer perform？（）AUse alt_disk_install to install AIX on all logical partitions.BConfigure the DVD as a desired resource on all partitions.CConfigure all resources as shared resources between all partitions.DCreate a separate NIM server to manage the installation of all partitions.
单选题Which of the following environments is most closely addressed by the N series N3600?（）Aa customer that requires block level storage Ba customer that requires CIFS and AIX NFS environments Ca customer that requires good scalability and performance Da customer that needs to consolidate multiple storage controllers under a single interface
单选题A customer needs a system supporting four partitions， each with the following requirements： ？ 0.6 1.65GHz processors ？ 2GB memory ？ AIX 5.2 They also need the ability to grow the system in the future. Which pSeries system would be positioned best to meet this customer’s requirements？（）Ap5-550 with the Advanced POWER Virtualization feature and AIX 5.2Bp5-550 with the POWER5 processor technology and AIX 5.2Cp5-570 with the Advanced POWER Virtualization feature and AIX 5.3Dp5-570 with the POWER5 processor technology and AIX 5.2
单选题A customer is considering multiple options for a particular set of workloads on AIX v5.2. They need to run ten identical LPARS， each containing four fibre cards， two 2-port Ethernet cards， and one SCSI card as well as two internal boot disks. They want the LPARS to be split across two physical systems for redundancy purposes； cost is an issue. They need a total of approximately 40 rPerf for all ten workloads. Which of the following solutions best fits these needs？（）A2 x p655 1.7ghz 8-way servers （21.87 rPerf each）B2 x p670 1.5ghz 8-way servers （24.18 rPerf each）C2 x p690 1.7ghz 8-way servers （27.11 rPerf each）D2 x p650 1.45ghz 8-way servers （18.67 rPerf each）
多选题A customer runs an application on a supported 8-way x445. The customer needs to monitor operations and wants to be alerted when problems arise. Which TWO of the following can be configured in IBM Director Base Pack to monitor the customer’s operations？（）AFan operationBBottleneck analysisCPower supply operationsDPlanned versus unplanned outagesEApplication predictive failure analysis
单选题A customer plans to purchase a p5-570 that will run in SMP mode to host a large financial database on AIX 5.2. The application is sized for an 8-way 1.65-GHz machine. They do not currently have an existing HMC that supports p5 machines. This organization experiences unpredictable short-term spikes in processor utilization. To mitigate the risk to their business， they are interested in IBM’s CoD offering. In addition to the 8-way system， what else should the pSeries technical specialist recommend to the customer？（）AAnother p5-570 building blockBCapacity Backup p5-570 building blockCAnother p5-570 building block and at least one HMCDCapacity Backup p5-570 building block and at least one HMC
单选题What is one reason you might recommend a solution using only autonomous access points to a customer？ （）A The customer requires Layer 3 roaming.B The customer requires immediate wire line integration with a catalyst 6500 switch.C The customer needs an outdoor-ready access point.D The customer wants the option to migrate to LWAPP.
单选题A customer needs a new 4-way p630 with three partitions to support three AIX 5.2 applications. Each partition requires two of the following： OS boot drives， fiber adapters， and gigabit Ethernet adapters. The customer has an HMC with an available serial port. In addition to the model 6C4， which of the following is required to meet the customer’s requirements？（）AOne 7311-D20 drawerBTwo 7311-D20 drawersCTwo 7311-D10 drawersDOne 7311-D10 drawers
单选题A customer has a requirement to eliminate single points of failure for an application. They have allocated one Ethernet adapter to each VIO server on the system. Which features of PowerVM and AIX will support the customer requirement？（）AEtherchannel and trunkingBNetwork Interface Backup and EtherchannelCShared Ethernet Adapter （SEA） Failover and EtherchannelDNetwork Interface Backup and Shared Ethernet Adapter failover