单选题The IP address of POWER6 595 is showing up in the HMC instead of the server name.Next to the IP address is the status，which shows Failed Authentication.The system administrator needs to enter a password. Which password is needed to restore connection for the POWER6 595 to the HMC？（）AThe hscroot user password.BThe CE password.CThe HMC password.DThe ASM admin password.
单选题
The IP address of POWER6 595 is showing up in the HMC instead of the server name.Next to the IP address is the status，which shows Failed Authentication.The system administrator needs to enter a password. Which password is needed to restore connection for the POWER6 595 to the HMC？（）
A
The hscroot user password.
B
The CE password.
C
The HMC password.
D
The ASM admin password.
参考解析
解析：
暂无解析
相关考题：
A user reports that their laptop does not have network connectivity, but was working fine lastweek. The technician executes IPCONFIG to see what the IP address is but it comes up with a169.254.254.1 address. This address is not part of the company‘s subnet.Which of the following MOST likely identifies this address type?（）A.MulticastB.DHCPC.APIPAD.Broadcast
What type of network connection is recommended for HMC and POWER6 Service Processor communication?() A.OpenB.PublicC.PrivateD.Virtual
An administrator has an existing HMC and POWER6 570 connected to a network switch. The administrator is planning to install two POWER6 570s with a dedicated HMC.Which infrastructure is required for the new HMC?（）A.An additional switch for the new HMCB.Asynchronous adapters on the new HMCC.The two 570 servers are directly connected to the new HMCD.One 570 is directly connected to the new HMC and the other is directly connected to the existing HMC
在MGWR4上配置的IP地址，从用途上可以分成（）.A、IP Address for SignalingB、IP Address for TrafficC、IP Address for OMD、IP Address for Backup
An administrator has an existing HMC and POWER6 570 connected to a network switch. The administrator is planning to install two POWER6 570s with a dedicated HMC. Which infrastructure is required for the new HMC？（）A、An additional switch for the new HMc B、Asynchronous adapters on the new HMcC、The two 570 servers are directly connected to the new HMc D、One 570 is directly connected to the new HMC and the other is directly connected to the existing HMc
For the p5 590 and p5 595 servers, the HMC must be directly attached. Why is the use of a private service network between HMC and the p5 590 required?（）A、The Bulk Power Controllers are dependent upon the HMC to provide them with DHCP addresses.B、A firewall is required to isolate the private network from any of the open networks to which the HMC is attached.C、Network communications can be implemented through an open network. No private network is required but it is recommended.D、All p5 590 and 595 servers are shipped with one service processor card. A private network is required to manage DHCP addresses.
A system administrator has determined that there is no network connectivity with the en0 interface. By doing a netstat -in, it is determined that the en0 interface is not showing up. Which of the following commands should be used to determine that en0 is defined in ODM with an IP address?（）A、 entstat -d B、 ifconfig -a C、 lsattr -El en0 D、 odmget -q "name=ent0 and attribute=netaddr" CuDv
Companycom is installing a p5 595 with AIX 5.3. The DLPAR option for the resources cannot be selected on the HMC menus. However, the daemons are running on both the HMC and LPARs. Which of the following is a prerequisite for DLPAR functionality?（）A、The resources must be unallocated in an LPARB、The microcode on the pSeries must be currentC、All network adapters on the LPAR must be definedD、Network connectivity and name resolution capability between HMC and LPARs
The IP address of POWER6 595 is showing up in the HMC instead of the server name.Next to the IP address is the status，which shows Failed Authentication.The system administrator needs to enter a password. Which password is needed to restore connection for the POWER6 595 to the HMC？（）A、The hscroot user password.B、The CE password.C、The HMC password.D、The ASM admin password.
What type of network connection is recommended for HMC and POWER6 Service Processorcommunication？（） A、OpenB、PublicC、PrivateD、Virtual
A customer plans to consolidate several systems onto POWER7. Their immediate requirement is to have a single Power 770, and they will buy a second Power 770 at a later stage. They want to keep their existing three POWER5 570s and three POWER6 520s which are all managed by an HMC (7310-CR3). Which of these statements is true and would minimize the cost?（）A、All the machines can be connected to the existing HMC, as long as it is updated to code level 7.7.1 or laterB、The Power 770 requires an HMC (7042-CR5 or later), so they must buy one. All of the systems can be managed by this new HMCC、They should buy a new HMC for the Power 770 system, and leave the POWER5 and POWER6 based systems connected to the existing oneD、The Power 770 requires an HMC, so they should connect the Power 770 to the HMC and convert the POWER5 and POWER6 based servers to IVM
Companycom currently has three p650 servers in their environment and they are implementing a p5 595. The p650 servers are running in an SMP environment, but are connected to a pair of HMCs. In order to follow best practices in the enterprise server environment and maintain HMC connectivity to the p650s, what else will needs to be ordered in addition to the p5 595?（）A、Include a new HMC in the order to connect to the p5 595B、Include a pair of new HMCs in the order to connect to the p5 595C、Include a media set for POWER5 HMC in the order to upgrade one of the existing HMC’s to POWER5 capabilitiesD、Include a media set for POWER5 HMC in the order to upgrade both of the existing HMC to POWER5 capabilities Include a media set for POWER5 HMC in the order to upgrade both of the existing HMC? To POWER5 capabilities
What type of network connection is recommended for HMC and POWER6 Service Processor communication？（）A、OpenB、PublicC、PrivateD、Virtual
ompany.com has recently received a new p5-570 in the data center and wants to connect it to an existing HMC environment where each of the existing POWER5 servers has been assigned a static IP address. Which of the following actions should the technical specialist perform to set the service processor network address for a static IP？（）A、Configure the IP address through the first client partition.B、Configure the IP address through the ASMI menus.C、Configure the POWER5 service processor for DHCP from the HMC DHCP server.D、Configure the HMC to use the default IP address on the service processor when acquiring the managed server.
The IP address of POWER6 595 is showing up in the HMC instead of the server name. Next to the IP address is the status， which shows ailedThe IP address of POWER6 595 is showing up in the HMC instead of the server name. Next to the IP address is the status， which shows ailed Authentication The system administrator needs to enter a password. Which password is needed to restore connection for the POWER6 595 to the HMC？（） A、The hscroot user password.B、The CE password.C、The HMC password.D、The ASM admin password.
A POWER6 595 LPAR has two dedicated processors. The LPAR is active and running AIX 6.1. What must be done to donate any unusedprocessing capacity to the shared processor pool?（）A、In the HMC Properties, select the options to allow processor sharing when the partition is inactive and active.B、In the LPAR Properties, select the options to allow processor sharing when the partition is inactive and active.C、In the LPAR Profile Properties, select the options to allow processor sharing when the partition is inactive and active.D、In the 595 Managed System Properties, select the options to allow processor sharing when partitions are inactive and active.
Which four components make up the Network Entity Title （NET） of an IS-IS router？（）A、AFB、AFIC、MACD、AreaE、SysIDF、A-SelectorG、N-SelectorH、IP-address
单选题An administrator types in the command router ospf 1 and receives the er ror message: "OSPF process 1 cannot start." (Output is omitted.) What should be done to correctly set up OSPF？（）AEnsure that an interface has been configured with an IP addressBEnsure that IP classless is enabledCEnsure that the interfaces can ping their directly connected neighborsDEnsure that an interface has been configured with an IP address and is up
单选题Companycom is trying to communicate with the service processor of the a new p5 590. However, the customer can not access the service processor. What needs to be done to fix this problem?（）AEnable DHCP server on the HMCBConfigure host name and IP address on DNS serverCManually set the IP address of the service processorDConnect a RS-232 cable from the HMC to the service processor
单选题The IP address of POWER6 595 is showing up in the HMC instead of the server name. Next to the IP address is the status, which shows ailedThe IP address of POWER6 595 is showing up in the HMC instead of the server name. Next to the IP address is the status, which shows ?ailed Authentication? The system administrator needs to enter a password. Which password is needed to restore connection for the POWER6 595 to the HMC?（）AThe hscroot user password.BThe CE password.CThe HMC password.DThe ASM admin password.
单选题For the p5 590 and p5 595 servers, the HMC must be directly attached. Why is the use of a private service network between HMC and the p5 590 required?（）AThe Bulk Power Controllers are dependent upon the HMC to provide them with DHCP addresses.BA firewall is required to isolate the private network from any of the open networks to which the HMC is attached.CNetwork communications can be implemented through an open network. No private network is required but it is recommended.DAll p5 590 and 595 servers are shipped with one service processor card. A private network is required to manage DHCP addresses.
单选题The System Administrator wants to do a backup of the HMC and notices that there are two options on the HMC menu: Backup Critical Console data and Save Upgrade Data. Which of the following best describes the differences between the two options?（）ABoth options back up user and partition profile data. Only the Backup Critical Console Data backs up TCP/IP settings or preferencesBBoth options back up partition profile information. Only the Backup Critical Console Data backs up service function settings, such as Inventory Scout, Service Agent, and Service Focal PointCThe Backup Critical Console Data should be performed just before the HMC software update operation. The Save Upgrade Data should be performed each time configuration changes are made to the system or the HMCDThe Save Upgrade Data should be performed just before the HMC software update operation. The Backup Critical Console Data should be performed each time configuration changes are made to the system or the HMC
单选题A POWER6 595 LPAR has two dedicated processors. The LPAR is active and running AIX 6.1. What must be done to donate any unusedprocessing capacity to the shared processor pool?（）AIn the HMC Properties, select the options to allow processor sharing when the partition is inactive and active.BIn the LPAR Properties, select the options to allow processor sharing when the partition is inactive and active.CIn the LPAR Profile Properties, select the options to allow processor sharing when the partition is inactive and active.DIn the 595 Managed System Properties, select the options to allow processor sharing when partitions are inactive and active.
单选题A user reports that their laptop does not have network connectivity, but was working fine last week. The technician executes IPCONFIG to see what the IP address is but it comes up with a 169.254.254.1 address. This address is not part of the company's subnet. Which of the following MOST likely identifies this address type?（）AMulticastBDHCPCAPIPADBroadcast
单选题An administrator has an existing HMC and POWER6 570 connected to a network switch. The administrator is planning to install two POWER6 570s with a dedicated HMC. Which infrastructure is required for the new HMC？（）AAn additional switch for the new HMc BAsynchronous adapters on the new HMcCThe two 570 servers are directly connected to the new HMc DOne 570 is directly connected to the new HMC and the other is directly connected to the existing HMc
单选题A system administrator has determined that there is no network connectivity with the en0 interface. By doing a netstat -in, it is determined that the en0 interface is not showing up. Which of the following commands should be used to determine that en0 is defined in ODM with an IP address?（）A entstat -d B ifconfig -a C lsattr -El en0 D odmget -q name=ent0 and attribute=netaddr CuDv
单选题The IP address of POWER6 595 is showing up in the HMC instead of the server name.Next to the IP address is the status，which shows Failed Authentication.The system administrator needs to enter a password. Which password is needed to restore connection for the POWER6 595 to the HMC？（）AThe hscroot user password.BThe CE password.CThe HMC password.DThe ASM admin password.
单选题An administrator has an existing HMC and POWER6 570 connected to a network switch. The administrator is planning to install two POWER6 570s with a dedicated HMC. Which infrastructure is required for the new HMC?（）AAn additional switch for the new HMCBAsynchronous adapters on the new HMCCThe two 570 servers are directly connected to the new HMCDOne 570 is directly connected to the new HMC and the other is directly connected to the existing HMC