单选题A customer requires a deskside solution that they will rack-mount in the future. Space is at a premium. The solution must support two AIX 5.2 applications that require two processors each. Which of the following deskside configurations should the pSeries Technical Specialist recommend？（）AOne p5-550 4-wayBTwo 2-way p5-520sCOne p630 4-wayDTwo 2-way p615s
单选题
A customer requires a deskside solution that they will rack-mount in the future. Space is at a premium. The solution must support two AIX 5.2 applications that require two processors each. Which of the following deskside configurations should the pSeries Technical Specialist recommend？（）
A
One p5-550 4-way
B
Two 2-way p5-520s
C
One p630 4-way
D
Two 2-way p615s
参考解析
解析：
暂无解析
相关考题：
A customer needs a new 4-way p630 with three partitions to support three AIX 5.2 applications. Each partition requires two of the following： OS boot drives， fiber adapters， and gigabit Ethernet adapters. The customer has an HMC with an available serial port. In addition to the model 6C4， which of the following is required to meet the customer’s requirements？（）A、One 7311-D20 drawerB、Two 7311-D20 drawersC、Two 7311-D10 drawersD、One 7311-D10 drawers
A customer is looking for a low-cost pSeries solution. The pSeries technical specialist is recommending several p650 Express Configurations. When reviewing the options with the customer， the pSeries technical specialist should emphasize which of the following limitations？（）A、Some Express Configurations limit the amount of maximum memory at order time.B、The customer must meet minimum system requirements to obtain Express Configuration pricing. C、The Express Configurations offer less than the maximum number of processors.D、The Express Configurations are only offered through the QuickShip Program.
A customer has an 8-way p5-570 with eight internal disk drives and AIX 5.2. Which of the following must be added， if anything， to the configuration to support four LPARs， assuming each LPAR requires twodisk drives？（）A、7311-D20 drawer with four disksB、Upgrade to AIX 5.3C、Fiber adapters to attach to SAND、Nothing
Company.com has ordered an 8-way p5-570 and plans to deploy four AIX 5L v5.3 LPARs. The pre-installation system design has all eight processors being placed in the shared processor pool， and four Micro-Partitions being assigned resources from the pool. Prior to the implementation of the system， the customer informs the technical specialist that one of the applications is only supported on AIX 5L 5.2. Which of the following changes to the system design should the technical specialist make to accommodate this change？（）A、Create all the partitions as AIX 5.2， each having two dedicated processors.B、Purchase a system with two additional processors that can be assigned to the AIX 5.2 Partition.C、Specify an AIX 5.2 partition using dedicated processors， reducing the number of processors in the shared pool.D、Use the virtual I/O server to manage the disks and network connections removing the need for different levels of device drivers.
A customer wishes to replace 12 older small UNIX systems. They are running out of floor space in their data center and any solution must take this into consideration. Assuming that the applications are supported on all AIX versions， which of the following would best meet the customer’s requirements？（）A、A p650 running AIX v5.3B、A p5-550 running AIX v5.3C、A p5-570 running Advanced POWER VirtualizationD、Multiple rack-mounted p615s running dynamic LPAR
A customer is interested in obtaining an AIX solution from IBM. They have two primary global requirements： ？ Availability （although HACMP is not required） ？ Low cost Which of the following approaches should the pSeries technical specialist use to meet the customer’s requirements and ensure customer satisfaction？（）A、Design the least-cost solution to prevent the competition from winning the business.B、Design a disaster recovery （DR） solution and convince the customer why DR is important to their business.C、Use the HACMP specialist to design the solution and include HA SmoothStart services as part of the proposal.D、Design a solution with redundant parts and explain to the customer the incremental cost associated with the redundancy.
A customer is having problems after an AIX version upgrade from 5.2 to 5.3. Which of the following should the pSeries technical specialist recommend that the customer call？（）A、IBM TechlineB、IBM SupportlineC、IBM Software DistributionD、IBM Hardware Support
A customer requires a deskside solution that they will rack-mount in the future. Space is at a premium. The solution must support two AIX 5.2 applications that require two processors each. Which of the following deskside configurations should the pSeries Technical Specialist recommend？（）A、One p5-550 4-wayB、Two 2-way p5-520sC、One p630 4-wayD、Two 2-way p615s
The pSeries technical specialist is designing a two LPAR p5-570 with eight total processors. The system is a test system to run AIX 5.2. The customer has stated a preference for internal disks for the boot devices. The customer has said they may later need to run three or four LPARs without increasing the number of processors. What should the pSeries technical specialist tell the customer about the ability of the p5-570 to meet their requirements？（）A、It will require additional SCSI adapters and I/O drawers or external disks to support more than two LPARs.B、It has sufficient built-in SCSI controllers and disk enclosures to support four total LPARs by only adding the necessary additional disks.C、It is unable to use internal disks for LPARs and therefore additional adapters I/O drawers or external disks must be used to support all LPARs.D、It can support six LPARs with internal disks but will require special features， cables and an adapter to support the additional LPARs with internal disks.
A space-constrained customer is currently running AIX 5.2 on a number of p650 servers and a pair of new p5-550 servers. They have four identical new applications each requiring a minimum of seven processors and 96GB of memory. Which solution would best meet the customer’s requirements？（）A、Two p670 serversB、Four p650 serversC、Two p5-570 serversD、Four p5-550 servers
A large customer is consolidating their pSeries systems onto a p5 590. They will have a requirement for a single device (disk, lun) to have multiple paths through different adapters in a single LPAR. The primary applications were written for AIX 5.2. Which of the following would be the recommended solution to satisfy this requirement?（）A、Assign the adapters to a Virtual IO partitionB、Use the MPIO function included in AIX 5.2C、Migrate the application to AIX 5.3 and use the MPIO functionD、Set up two Virtual IO partitions and attach both partitions to the device
A customer would like to implement an IBM System Storage DS8000 solution that requires 225 TB raw capacity. They are convinced that 450 GB is the optimum size for their business applications. There is limited space available for additional machines in the data center. Which solution meets best this requirement（）A、DS8700 system with three framesB、DS8800 system with threeframeC、DS8700 system with two framesD、DS8800 system with two frames
An HP UNIX server customer running Oracle is interested in knowing more about IBM’s future direction because of the uncertainty of HP hardware platforms changing to Itanium. Which of the following advantages should be communicated as a compelling reason to consider a pSeries server solution？（）A、IBM pSeries servers support Oracle on both POWER4 and ItaniumB、AIX has Itanium affinity with any ISV application including OracleC、Oracle and thousands of other ISV applications are already available for AIX on pSeriesD、IBM Data Migration Services can migrate the HP UNIX operating system to a pSeries solution
单选题A customer is having problems after an AIX version upgrade from 5.2 to 5.3. Which of the following should the pSeries technical specialist recommend that the customer call？（）AIBM TechlineBIBM SupportlineCIBM Software DistributionDIBM Hardware Support
单选题A large customer is consolidating their pSeries systems onto a p5 590. They will have a requirement for a single device (disk, lun) to have multiple paths through different adapters in a single LPAR. The primary applications were written for AIX 5.2. Which of the following would be the recommended solution to satisfy this requirement?（）AAssign the adapters to a Virtual IO partitionBUse the MPIO function included in AIX 5.2CMigrate the application to AIX 5.3 and use the MPIO functionDSet up two Virtual IO partitions and attach both partitions to the device
单选题A customer has two different applications， each requiring two processors. They are evaluating the following three alternatives： 1） Two p5-520s each with two processors and 4GB memory 2） One partitioned p5-550 with four processors and 8GB memory 3） One partitioned p5-570 with four processors and 8GB memory All three solutions will work. However， when helping the customer decide which solution is best for their environment， the pSeries technical specialist should convey which of the following pieces of information？（）A AB BC CD D
单选题A space-constrained customer is currently running AIX 5.2 on a number of p650 servers and a pair of new p5-550 servers. They have four identical new applications each requiring a minimum of seven processors and 96GB of memory. Which solution would best meet the customer’s requirements？（）ATwo p670 serversBFour p650 serversCTwo p5-570 serversDFour p5-550 servers
单选题A customer wishes to replace 12 older small UNIX systems. They are running out of floor space in their data center and any solution must take this into consideration. Assuming that the applications are supported on all AIX versions， which of the following would best meet the customer’s requirements？（）AA p650 running AIX v5.3BA p5-550 running AIX v5.3CA p5-570 running Advanced POWER VirtualizationDMultiple rack-mounted p615s running dynamic LPAR
单选题A customer is looking for a low-cost pSeries solution. The pSeries technical specialist is recommending several p650 Express Configurations. When reviewing the options with the customer， the pSeries technical specialist should emphasize which of the following limitations？（）ASome Express Configurations limit the amount of maximum memory at order time.BThe customer must meet minimum system requirements to obtain Express Configuration pricing. CThe Express Configurations offer less than the maximum number of processors.DThe Express Configurations are only offered through the QuickShip Program.
单选题A customer has an 8-way p5-570 with eight internal disk drives and AIX 5.2. Which of the following must be added， if anything， to the configuration to support four LPARs， assuming each LPAR requires twodisk drives？（）A7311-D20 drawer with four disksBUpgrade to AIX 5.3CFiber adapters to attach to SANDNothing
单选题A customer would like to implement an IBM System Storage DS8000 solution that requires 225 TB raw capacity. They are convinced that 450 GB is the optimum size for their business applications. There is limited space available for additional machines in the data center. Which solution meets best this requirement（）ADS8700 system with three framesBDS8800 system with threeframeCDS8700 system with two framesDDS8800 system with two frames
单选题A customer is interested in obtaining an AIX solution from IBM. They have two primary global requirements： ？ Availability （although HACMP is not required） ？ Low cost Which of the following approaches should the pSeries technical specialist use to meet the customer’s requirements and ensure customer satisfaction？（）ADesign the least-cost solution to prevent the competition from winning the business.BDesign a disaster recovery （DR） solution and convince the customer why DR is important to their business.CUse the HACMP specialist to design the solution and include HA SmoothStart services as part of the proposal.DDesign a solution with redundant parts and explain to the customer the incremental cost associated with the redundancy.
单选题A customer needs a new 4-way p630 with three partitions to support three AIX 5.2 applications. Each partition requires two of the following： OS boot drives， fiber adapters， and gigabit Ethernet adapters. The customer has an HMC with an available serial port. In addition to the model 6C4， which of the following is required to meet the customer’s requirements？（）AOne 7311-D20 drawerBTwo 7311-D20 drawersCTwo 7311-D10 drawersDOne 7311-D10 drawers
单选题A customer needs a new Microsoft Windows 2003 Server. They are running an application that requires substantial memory. They would like a rack mountable system， which will support four Xeon processors with 2MB of L3 cache. Which of the following is the minimum configuration to satisfy the customer’s requirements？（）Ax445 with four Xeon MP processors and 8GB of memoryBx445 with four Xeon MP processors and 16GB of memory in a single SMP moduleCx445 with four Xeon DP processors and 16GB of memory in a single SMP moduleDx445 with two SMP modules each containing two Xeon DP processors and 8GB of memory
单选题Company.com has ordered an 8-way p5-570 and plans to deploy four AIX 5L v5.3 LPARs. The pre-installation system design has all eight processors being placed in the shared processor pool， and four Micro-Partitions being assigned resources from the pool. Prior to the implementation of the system， the customer informs the technical specialist that one of the applications is only supported on AIX 5L 5.2. Which of the following changes to the system design should the technical specialist make to accommodate this change？（）ACreate all the partitions as AIX 5.2， each having two dedicated processors.BPurchase a system with two additional processors that can be assigned to the AIX 5.2 Partition.CSpecify an AIX 5.2 partition using dedicated processors， reducing the number of processors in the shared pool.DUse the virtual I/O server to manage the disks and network connections removing the need for different levels of device drivers.
单选题A customer requires a deskside solution that they will rack-mount in the future. Space is at a premium. The solution must support two AIX 5.2 applications that require two processors each. Which of the following deskside configurations should the pSeries Technical Specialist recommend？（）AOne p5-550 4-wayBTwo 2-way p5-520sCOne p630 4-wayDTwo 2-way p615s
单选题The pSeries technical specialist is designing a two LPAR p5-570 with eight total processors. The system is a test system to run AIX 5.2. The customer has stated a preference for internal disks for the boot devices. The customer has said they may later need to run three or four LPARs without increasing the number of processors. What should the pSeries technical specialist tell the customer about the ability of the p5-570 to meet their requirements？（）AIt will require additional SCSI adapters and I/O drawers or external disks to support more than two LPARs.BIt has sufficient built-in SCSI controllers and disk enclosures to support four total LPARs by only adding the necessary additional disks.CIt is unable to use internal disks for LPARs and therefore additional adapters I/O drawers or external disks must be used to support all LPARs.DIt can support six LPARs with internal disks but will require special features， cables and an adapter to support the additional LPARs with internal disks.
单选题An HP UNIX server customer running Oracle is interested in knowing more about IBM’s future direction because of the uncertainty of HP hardware platforms changing to Itanium. Which of the following advantages should be communicated as a compelling reason to consider a pSeries server solution？（）AIBM pSeries servers support Oracle on both POWER4 and ItaniumBAIX has Itanium affinity with any ISV application including OracleCOracle and thousands of other ISV applications are already available for AIX on pSeriesDIBM Data Migration Services can migrate the HP UNIX operating system to a pSeries solution