单选题Continuous availability is required for an application in a two-node cluster. There is one rotating resource group in the cluster， and the nodes are identical machines. Client telnet connections to the application cannot be broken because it takes 20 to 30 minutes to recycle the client workstations and transactions will be lost. What configuration best provides continuous connectivity to the application？（）A IPAT using IP Replacement without MAC address takeover.B IPAT using IP Aliasing and hardware MAC address takeover.C None because continuous telnet connectivity cannot be provided with HACMP.D Shared service IP address assigned to multiple network interface cards on each node.
单选题
Continuous availability is required for an application in a two-node cluster. There is one rotating resource group in the cluster， and the nodes are identical machines. Client telnet connections to the application cannot be broken because it takes 20 to 30 minutes to recycle the client workstations and transactions will be lost. What configuration best provides continuous connectivity to the application？（）
A
IPAT using IP Replacement without MAC address takeover.
B
IPAT using IP Aliasing and hardware MAC address takeover.
C
None because continuous telnet connectivity cannot be provided with HACMP.
D
Shared service IP address assigned to multiple network interface cards on each node.
参考解析
解析：
暂无解析
相关考题：
Continuous availability is required for an application in a two-node cluster. There is one rotating resource group in the cluster， and the nodes are identical machines. Client telnet connections to the application cannot be broken because it takes 20 to 30 minutes to recycle the client workstations and transactions will be lost. What configuration best provides continuous connectivity to the application？（） A、 IPAT using IP Replacement without MAC address takeover.B、 IPAT using IP Aliasing and hardware MAC address takeover.C、 None because continuous telnet connectivity cannot be provided with HACMP.D、 Shared service IP address assigned to multiple network interface cards on each node.
A cluster administrator decides ti implement application monitoring in order to monitor both a web application and its supporting database. The plan is to use a single resource group prod_rg and to configure one monitor method for the web app and one monitor method for the database. Which of the following statements best describes the need for custom resource monitor？（） A、 Multiple application servers must be in a single resource group.B、 Multiple application servers per resource group may be monitored.C、 Multiple resource groups must each contain a single application server.D、 Multiple application servers in a cluster cannot use process monitoring.
Company.com has a six-node concurrent resource group with an application that is accessed by a web connection to the cluster nodes. How is the workload moved to another cluster node during a node failure？（） A、 The concurrent application must control the web interface through application monitoring.B、 A second resource group will be required to move the web application and IP label to a new node during a node failure.C、 The concurrent resource group can support multiple IP labels through IP aliasing so all IP labels are defined in the concurrent resource group.D、 The dynamic node priority facility in HACMP will relocate the web application and the IP label，if it is correctly defined in the application start and stop script.
An administrator uses C-SPOC to change the user password for all nodes that belong to a Resource group. The administrator must perform this operation on a node that is：（） A、 included in the resource group.B、 currently managing the resource group.C、 not part of an application resource group.D、 included in a cluster_admin resource group.
Which of the following is required to ensure the completion of all tests within the automated procedure of thecluster test tool？（）A、Application monitoring has been configuredB、Only disk heartbeat networks have been usedC、Cluster nodes are attached to two IP networksD、Resource Group dependencies have been configured
An enterprise has three nodes： -Node ’A’ is a production database， -Node ’B’ is a production Application server， and -Node ’C’ is a test and development node. Node ’C’ is used by six programmers to develop and the production application as business critical and would like to make it highly available with HACMP. Application development and testing is not business critical. Which of the following describes the best solution？（） A、 There is not an adequate solution because HACMP should not be configured in this environment without a dedicated standby node.B、 Nodes ’A’ and ’B’ should be configured in a cluster with mutual fallover of two cascading resource groups to provide both nodes will deliver acceptable response time with both resource groups.C、 Nodes ’A’ and ’C’ should be configured in one cluster， and Nodes ’B’ and ’C’ in another cluster to prevent both the database and application server from falling over to Node ’C’ at the same time.D、 Nodes ’A’， ’B’， and ’C’ should be configured in a cluster with Node ’C’ the hot standby for both the database and application server resource groups. Workload Manager （WLM） must be configured on database and application developers from over utilizing the CPU resources.
During initial cluster planning session， a requirement is mandated that application monitoring will Be used to monitor the production database and three application servers. Since all the application servers rely on the database being active， only one resource group has been planned to manage the starting/stopping of the cluster resources. How ill the initial design impact the use of application monitoring？（） A、 Only one application server per resource group can be monitored.B、 Process monitoring is part of RSCT and requires no special scripts.C、 Any application can be monitored as long as it has an application server.D、 Having all application servers in one resource group improves recovery time.
Company.com has installed HACMP and is configuring a three-node cluster. One of the Applications uses the AIX hostname as a key for authorization to execute on the specific computer. The application vendor was contacted and consented to having multiple copies of the application but required that only one application be active at any one point in time. How can the AIX host name dependency be managed in an HACMP environment.（） A、 It cannot be managed because the application will not work properly with HACMP.B、 The application start and stop script for the application can manage the hostname.C、 HACMP will require customization to correctly manage a change in the hostname since it is tied to the primary network adapter.D、 HACMP will have to be restarted if the hostname is changed. This can be done with customization in the node_up and node_down event scripts.
One service IP label and one volume group are assigned to a resource group in a cluster. An Additional service IP label and volume group need to be added to the resource group. How can this be done with the minimum disruption of the cluster？（） A、 Make the changes in HACMP and synchronize the cluster.B、 It cannot， because changes like this cannot be made while the cluster is running.C、 Make the changes in HACMP and wait until the next failure for the changes to take affect.D、 Use the forced option to stop the cluster，make the changes，and restart cluster services.
An HACMP cluster has three nodes of unequal size. The largest node is Node ’A’. The primary application on Node ’A’ has two components. One component is memory intensive， the other is IO intensive. Nodes ’B’ and ’C’ are running web servers and databases that access information produced by applications on Node ’A’. The customer requires the most performance from the primary application and wants all nodes available for fallover processing. Which of the following is the best solution for meeting the customer requirements？（） A、 Use nodes of equal size.B、 Create multiple resource groups and use loadlever.C、 Use dynamic node priority to manage resource groups.D、 Use an ordered list to manage resource group fallover.
What is a prerequisite for using the application availability analysis tool in HACMP？（） A、 Tivoli is required to generate reports from the data collected.B、 An application monitor must be associated with the application to monitor.C、 An "aaatd" daemon must be started and added in as a post event to "node_up_complete".D、 Resource group is present on all of the systems in the cluster that have the desired application.
You are the network administrator for your company. The network consists of a single Active Directory domain. All computers on the network are members of the domain. You administer a Network Load Balancing cluster that consists of three nodes. Each node runs Windows Server 2003 and contains a single network adapter. The Network Load Balancing cluster can run only in unicast mode. The Network Load Balancing cluster has converged successfully. To increase the utilization of the cluster， you decide to move a particular application to each node of the cluster. For this application to run， you must add a Network Load Balancing port rule to the nodes of the cluster. You start Network Load Balancing Manager on the second node of the cluster. However， Network Load Balancing Manager displays a message that it cannot communicate with the other two nodes of the cluster. You want to add the port rule to the nodes of the cluster. What should you do？ （）A、 Use Network Load Balancing Manager on the Network Load Balancing default host to add the port rule.B、 Change the host priority of the second node to be the highest in the cluster， and then use Network Load Balancing Manager to add the port rule.C、 Run the nlb.exe drain command on each node， and then use Network Load Balancing Manager to add the port rule.D、 Add the port rule through Network Connections Properties on each node.
You are a network administrator for your company. You install Windows Server 2003 on two servers named Server1 and Server2. You configure Server1 and Server2 as a two-node cluster. You configure a custom application on the cluster by using the Generic Application resource， and you put all resources in the Application group. You test the cluster and verify that it fails over properly and that you can move the Applications group from one node to the other and back again. The application and the cluster run successfully for several weeks. Users then report that they cannot access the application. You investigate and discover that Server1 and Server2 are running but the Application group is in a failed state. You restart the Cluster service and attempt to bring the Application group online on Server1. The Application group fails. You discover that Server1 fails， restarts automatically， and fails again soon after restarting. Server1 continues to fail and restart until the Application group reports that it is in a failed state and stops attempting to bring itself back online. You need to configure the Application group to remain on Server2 while you research the problem on Server1. What should you do？ （）A、 On Server2， configure the failover threshold to 0.B、 On Server2， configure the failover period to 0.C、 Remove Server1 from the Possible owners list.D、 Remove Server1 from the Preferred owners list.
Company.com has a two-node HACMP cluster with a single cascading resource group. Node ’A’ is the normal production node， and Node ’B’ is the standby node. One of the first steps in the HACMP test plan is to start the cluster and to verify that al elements for the resource group have been acquired. The administrator who is conducting the HACMP test starts the HACMP daemons on Node ’B’ with the ’smitty clstart" command. The administrator notices that Node ’B’ acquires the elements of the resource group， including a service IP labels，a shared volume group， and an application server that has been started. The expectation was that Node ’B’ would enter the cluster in a standby status， rather than acquiring production resources. What should the administrator do to correct this problem？（） A、 Change the cluster to a rotating design.B、 Change the Cascading without Fallback flag to true.C、 Change the Inactive Takeover field to false in the cluster configuration.D、 Nothing should be done. This is the default behavior for cascading resource groups，and node ’A’ should have been started first.
单选题A cluster administrator is concerned about using the forced varyon resource group function. Although the function provides increased data availability if it is enabled for a cluster resource group， management is concerned about data integrity. If a varyonvg command fails， an HACMP forced varyon will only occur if which of the following is true？（）A A loss of quorum has occurred on one of the disks in the failed volume group.B Selective fallover caused by an application moves a resource group to a takeover node.C A check is made to ensure at least one complete copy of all data is available in the volume group.D The MISSING_PV=TRUE environment variable has been set causing the volume group to be forced online.
单选题You are the network administrator for your company. The network consists of a single Active Directory domain. All computers on the network are members of the domain. You administer a Network Load Balancing cluster that consists of three nodes. Each node runs Windows Server 2003 and contains a single network adapter. The Network Load Balancing cluster can run only in unicast mode. The Network Load Balancing cluster has converged successfully. To increase the utilization of the cluster， you decide to move a particular application to each node of the cluster. For this application to run， you must add a Network Load Balancing port rule to the nodes of the cluster. You start Network Load Balancing Manager on the second node of the cluster. However， Network Load Balancing Manager displays a message that it cannot communicate with the other two nodes of the cluster. You want to add the port rule to the nodes of the cluster. What should you do？ （）A Use Network Load Balancing Manager on the Network Load Balancing default host to add the port rule.B Change the host priority of the second node to be the highest in the cluster， and then use Network Load Balancing Manager to add the port rule.C Run the nlb.exe drain command on each node， and then use Network Load Balancing Manager to add the port rule.D Add the port rule through Network Connections Properties on each node.
单选题An HACMP cluster has three nodes of unequal size. The largest node is Node ’A’. The primary application on Node ’A’ has two components. One component is memory intensive， the other is IO intensive. Nodes ’B’ and ’C’ are running web servers and databases that access information produced by applications on Node ’A’. The customer requires the most performance from the primary application and wants all nodes available for fallover processing. Which of the following is the best solution for meeting the customer requirements？（）A Use nodes of equal size.B Create multiple resource groups and use loadlever.C Use dynamic node priority to manage resource groups.D Use an ordered list to manage resource group fallover.
单选题What is a prerequisite for using the application availability analysis tool in HACMP？（）A Tivoli is required to generate reports from the data collected.B An application monitor must be associated with the application to monitor.C An aaatd daemon must be started and added in as a post event to node_up_complete.D Resource group is present on all of the systems in the cluster that have the desired application.
单选题Company.com has installed HACMP and is configuring a three-node cluster. One of the Applications uses the AIX hostname as a key for authorization to execute on the specific computer. The application vendor was contacted and consented to having multiple copies of the application but required that only one application be active at any one point in time. How can the AIX host name dependency be managed in an HACMP environment.（）A It cannot be managed because the application will not work properly with HACMP.B The application start and stop script for the application can manage the hostname.C HACMP will require customization to correctly manage a change in the hostname since it is tied to the primary network adapter.D HACMP will have to be restarted if the hostname is changed. This can be done with customization in the node_up and node_down event scripts.
单选题One service IP label and one volume group are assigned to a resource group in a cluster. An Additional service IP label and volume group need to be added to the resource group. How can this be done with the minimum disruption of the cluster？（）A Make the changes in HACMP and synchronize the cluster.B It cannot， because changes like this cannot be made while the cluster is running.C Make the changes in HACMP and wait until the next failure for the changes to take affect.D Use the forced option to stop the cluster，make the changes，and restart cluster services.
单选题An enterprise has three nodes： -Node ’A’ is a production database， -Node ’B’ is a production Application server， and -Node ’C’ is a test and development node. Node ’C’ is used by six programmers to develop and the production application as business critical and would like to make it highly available with HACMP. Application development and testing is not business critical. Which of the following describes the best solution？（）A There is not an adequate solution because HACMP should not be configured in this environment without a dedicated standby node.B Nodes ’A’ and ’B’ should be configured in a cluster with mutual fallover of two cascading resource groups to provide both nodes will deliver acceptable response time with both resource groups.C Nodes ’A’ and ’C’ should be configured in one cluster， and Nodes ’B’ and ’C’ in another cluster to prevent both the database and application server from falling over to Node ’C’ at the same time.D Nodes ’A’， ’B’， and ’C’ should be configured in a cluster with Node ’C’ the hot standby for both the database and application server resource groups. Workload Manager （WLM） must be configured on database and application developers from over utilizing the CPU resources.
单选题Company.com has a six-node concurrent resource group with an application that is accessed by a web connection to the cluster nodes. How is the workload moved to another cluster node during a node failure？（）A The concurrent application must control the web interface through application monitoring.B A second resource group will be required to move the web application and IP label to a new node during a node failure.C The concurrent resource group can support multiple IP labels through IP aliasing so all IP labels are defined in the concurrent resource group.D The dynamic node priority facility in HACMP will relocate the web application and the IP label，if it is correctly defined in the application start and stop script.
单选题A cluster administrator decides ti implement application monitoring in order to monitor both a web application and its supporting database. The plan is to use a single resource group prod_rg and to configure one monitor method for the web app and one monitor method for the database. Which of the following statements best describes the need for custom resource monitor？（）A Multiple application servers must be in a single resource group.B Multiple application servers per resource group may be monitored.C Multiple resource groups must each contain a single application server.D Multiple application servers in a cluster cannot use process monitoring.
单选题You are a network administrator for your company. You install Windows Server 2003 on two servers named Server1 and Server2. You configure Server1 and Server2 as a two-node cluster. You configure a custom application on the cluster by using the Generic Application resource， and you put all resources in the Application group. You test the cluster and verify that it fails over properly and that you can move the Applications group from one node to the other and back again. The application and the cluster run successfully for several weeks. Users then report that they cannot access the application. You investigate and discover that Server1 and Server2 are running but the Application group is in a failed state. You restart the Cluster service and attempt to bring the Application group online on Server1. The Application group fails. You discover that Server1 fails， restarts automatically， and fails again soon after restarting. Server1 continues to fail and restart until the Application group reports that it is in a failed state and stops attempting to bring itself back online. You need to configure the Application group to remain on Server2 while you research the problem on Server1. What should you do？ （）A On Server2， configure the failover threshold to 0.B On Server2， configure the failover period to 0.C Remove Server1 from the Possible owners list.D Remove Server1 from the Preferred owners list.
单选题An administrator uses C-SPOC to change the user password for all nodes that belong to a Resource group. The administrator must perform this operation on a node that is：（）A included in the resource group.B currently managing the resource group.C not part of an application resource group.D included in a cluster_admin resource group.
单选题During initial cluster planning session， a requirement is mandated that application monitoring will Be used to monitor the production database and three application servers. Since all the application servers rely on the database being active， only one resource group has been planned to manage the starting/stopping of the cluster resources. How ill the initial design impact the use of application monitoring？（）A Only one application server per resource group can be monitored.B Process monitoring is part of RSCT and requires no special scripts.C Any application can be monitored as long as it has an application server.D Having all application servers in one resource group improves recovery time.
单选题An enterprise has two nodes： -Node ’A’ runs a large relational database and ha six CPUs and 32GB of memory. -Node ’B’ is an application server with three CPU’s and 16GB of memory. During peak production periods， the CPU load for Node ’A’ is normally between 30% and 40%. For Node ’B’， the CPU load is 10% to 20% during peak production periods. Which of the following describes the best solution for an HACMP cluster？（）A Two cluster with two resource groups in a mutual takeover configuration.B One cluster with two cascading resource groups in a mutual takeover configuration.C One cluster with two rotating resource groups in a one-sided hot standby configuration.D Two clusters with two resource groups in a hot-standby configuration with a newly acquired third node.