多选题An RMAN backup job fails， displaying the following error： ORA-19809： limit exceeded for recovery files Your analysis shows that the Flash Recovery area is full. Which two actions could you take to resolve the error and avoid this error in the future？ （）Atake the backup of the flash recovery area less frequentlyBincrease the value of the UNDO_RETENTION initialization parameterCchange the value of the WORKAREA_SIZE_POLICY initialization parameter to AUTODchange the backup retention policy to retain the backups for a smaller period of timeEincrease the value of the DB_RECOVERY_FILE_DEST_SIZE initialization parameterFincrease the value of the CONTROL_FILE_RECORD_KEEP_TIME initialization parameter
多选题
An RMAN backup job fails， displaying the following error： ORA-19809： limit exceeded for recovery files Your analysis shows that the Flash Recovery area is full. Which two actions could you take to resolve the error and avoid this error in the future？ （）
A
take the backup of the flash recovery area less frequently
B
increase the value of the UNDO_RETENTION initialization parameter
C
change the value of the WORKAREA_SIZE_POLICY initialization parameter to AUTO
D
change the backup retention policy to retain the backups for a smaller period of time
E
increase the value of the DB_RECOVERY_FILE_DEST_SIZE initialization parameter
F
increase the value of the CONTROL_FILE_RECORD_KEEP_TIME initialization parameter
参考解析
解析：
暂无解析
相关考题：
In your database, the flash recovery area (FRA) is configured as the default for RMAN backups. You executed the following commands to configure the settings in RMAN:Which statement is true about the outcome?（）A. Only one channel is allocated and the backup is created in the flash recovery areaB. Only one channel is allocated and the backup is created in the destination specified for channelC. Two channels are allocated and backup sets are created in the destinations specified for channels 1 and 2D. Three channels are allocated and backup sets are created in the destinations specified for channels 1, 2, and FRA
You executed the following command to perform a backup of the USERS tablespace： SQL ALTER TABLESPACE users BEGIN BACKUP； ALTER TABLESPACE users BEGIN BACKUP * ERROR at line 1： ORA-01123： cannot start online backup； media recovery not enabled What could be the reason for this error（）A、The MTTR Advisor is disabled.B、The database is in NOARCHIVELOG mode.C、The tablespace is already in backup mode.D、The Flash Recovery Area is not configured.
You decided to change the location of the flash recovery area. You executed the following command： Which statement is true？（）A、The location can be changed only if the flash recovery area is empty.B、After executing the command， all new flash recovery area files will be created in the new location.C、The command will generate an error because you cannot change the flash recovery area while the database is open.D、All the existing files in the flash recovery area will be moved to the new location， and all new Flash Recovery Area files will be created in the new location.
Every Sunday， consistent backups are performed on your database. Because of a user error， you performed an incomplete recovery on Tuesday and opened the database with the RESETLOGS option. A user error occurs again on Thursday， which necessitates an incomplete recovery. Sunday’s backup is the most recent backup available. What would you do in this scenario？（）A、recovery cannot be performed because a backup was not performed after the last incomplete recoveryB、restore all the files from Sunday’s backup， and then perform an incomplete recovery up to the point in time when the user error occurred on ThursdayC、restore all the files from Sunday’s backup， and then recover up to the point in time when the RESETLOGS operation was performed on TuesdayD、restore all the files from Sunday’s backup， and open the database to reset the database to the point in time when the backup was performed on Sunday
Your database operates in ARCHIVELOG mode and all the tablespaces are online. Due to a user error， you decided to perform an incomplete recovery. Which two tasks would you be required to perform in the recovery process？（）A、 open the database with the RESTRICTED optionB、 open the database with the RESETLOGS optionC、 recover to the required SCN only that data file in which the error occurredD、 recover all the data files to the same system change number （SCN）
You are using the flash recovery area (fast recovery area in 11g Release 2) to store backup related files in your database. After regular monitoring of space usage in the Mash recovery area. You realize that the flash recovery area is jetting filled up very fast and it is running out of space. Your database flash recovery area is low on space and you have no more room on disk. Proactively, which two options could you use to make more space available in the flash recovery？（）A、Change the RMAN archived log deletion policyB、Use the RMAN CROSSCHECK command to reclaim the archived log spaceC、Change the RMAN retention policy to retain backups for a shorter period of timeD、Use OS command to move files from the flash recovery area to some other location
You configured the flash recovery area in the database. Which two files would you expect to find in the flash recovery area？（）A、 backup piecesB、 copies of all the parameter filesC、 trace file generated using BACKUP CONTROLFILE TO TRACED、 control file autobackups
You decided to change the location of the flash recovery area. You executed the following command： ALTER SYSTEM SET DB_RECOVERY_FILE_DEST=’+disk1’ SCOPE=BOTH SID=’*’； Which statement is true？（）A、 The location can be changed only if the flash recovery area is empty.B、 After executing the command， all new flash recovery area files will be created in the new location.C、 The command will generate an error because you cannot change the flash recovery area while the database is open.D、 All the existing files in the flash recovery area will be moved to the new location and all new Flash Recovery Area files will be created in the new location.
You have configured the flash recovery area to store online redo log files， control files， archived redo logs and RMAN backups. Which of the following files can you successfully delete from the flash recovery area if you want to reclaim the space within it？（）A、 multiplexed control filesB、 RMAN obsolete backupsC、 multiplexed online redo log filesD、 archived redo logs that have not been copied to tape
An RMAN backup job fails， displaying the following error： ORA/x7f19809： limit exceeded for recovery files Your analysis shows that the Flash Recovery area is full. Which two actions could you take to resolve the error and avoid this error in future？（）A、take the backup of the flash recovery area less frequentlyB、increase the value of the UNDO_RETENTION initialization parameterC、change the value of the WORKAREA_SIZE_POLICY initialization parameter to AUTOD、change the backup retention policy to retain the backups for a smaller period of time E、increase the value of the DB_RECOVERY_FILE_DEST_SIZE initialization parameterF、increase the value of the CONTROL_FILE_RECORD_KEEP_TIME initialization parameter
Your database operates in ARCHIVELOG mode and all the tablespaces are online. Due to a user error， you decided to perform an incomplete recovery. Which two tasks would you be required to perform in the recovery process？ （）A、open the database with the RESETLOGS optionB、open the database with the RESTRICTED optionC、recover all the data files to the same system change number （SCN）D、recover to the required SCN only that data file in which the error occurred
An RMAN backup job fails， displaying the following error message： ORA/x7f19809： limit exceeded for recovery files Your analysis shows that the Flash Recovery area is full. What would you do to resolve the error？（）A、increase the value of UNDO_RETENTIONB、change the value of WORKAREA_SIZE_POLICY to AUTOC、increase the value of DB_RECOVERY_FILE_DEST_SIZED、increase the value of CONTROL_FILE_RECORD_KEEP_TIME
The database is running in ARCHIVELOG mode and the FORMAT option is not configured in RMAN for disk backups. You configured the flash recovery area location and size by using the DB_RECOVERY_FILE_DEST and DB_RECOVERY_FILE_DEST_SIZE initialization parameters. Which statement is correct in this scenario？（）A、 If the FORMAT option to the RMAN BACKUP command is specified， then RMAN creates backup pieces and image copies in the flash recovery area with names in the Oracle Managed Files （OMF） format.B、 If any local destinations for LOG_ARCHIVE_DEST_n are set， then archived redo logs are stored in these destinations as well as in the flash recovery area.C、 If the flash recovery area location is configured using the DB_RECOVERY_FILE_DEST initialization parameter， then the RMAN backup of Oracle managed datafiles （OMF） only will go to the flash recovery area by default.D、 If no other destination is configured for recovery files， then RMAN places the control file autobackups in the flash recovery area by default.
You receive the following error： ORA-19804： cannot reclaim nnnnn bytes disk space from mmmmm limit Identify the reason for receiving the above error message？（）A、 The sort area is very small.B、 There is no more space in the Undo tablespace.C、 The flash recovery area is full.D、 The online redo log file is full.
ou are using the flash recovery area （fast recovery area in 11g Release 2） to store backup related files in your database. After regular monitoring of space usage in the Mash recovery area. You realize that the flash recovery area is （jetting filled up very fast and it is running out of space. Your database flash recovery area is low on specie and you have no more room on disk. Proactively， which two options could you use to make more space available in the flash recovery（）A、 Change the RMAN archived log deletion policy.B、 Use the RMAN CROSSCHECK command to reclaim the archived log space.C、 Change the RMAN retention policy to retain backups for a shorter period of time.D、 Use OS command to move files from the flash recovery area to some other location.
You performed a backup of the flash recovery area by using the following command for the first time： RMAN BACKUP RECOVERY AREA; Which files in the flash recovery area are backed up？（）A、flashback logsB、current control fileC、control file autobackupsD、incremental backup sets
多选题Your database operates in ARCHIVELOG mode and all the tablespaces are online. Due to a user error， you decided to perform an incomplete recovery. Which two tasks would you be required to perform in the recovery process？ （）Aopen the database with the RESETLOGS optionBopen the database with the RESTRICTED optionCrecover all the data files to the same system change number （SCN）Drecover to the required SCN only that data file in which the error occurred
多选题An RMAN backup job fails， displaying the following error： ORA/x7f19809： limit exceeded for recovery files Your analysis shows that the Flash Recovery area is full. Which two actions could you take to resolve the error and avoid this error in future？（）Atake the backup of the flash recovery area less frequentlyBincrease the value of the UNDO_RETENTION initialization parameterCchange the value of the WORKAREA_SIZE_POLICY initialization parameter to AUTODchange the backup retention policy to retain the backups for a smaller period of timeEincrease the value of the DB_RECOVERY_FILE_DEST_SIZE initialization parameterFincrease the value of the CONTROL_FILE_RECORD_KEEP_TIME initialization parameter
多选题You performed a backup of the flash recovery area by using the following command for the first time： RMAN BACKUP RECOVERY AREA; Which files in the flash recovery area are backed up？（）Aflashback logsBcurrent control fileCcontrol file autobackupsDincremental backup sets
多选题An RMAN backup job fails， displaying the following error： ORA-19809： limit exceeded for recovery files Your analysis shows that the Flash Recovery area is full. Which two actions could you take to resolve the error and avoid this error in the future？ （）Atake the backup of the flash recovery area less frequentlyBincrease the value of the UNDO_RETENTION initialization parameterCchange the value of the WORKAREA_SIZE_POLICY initialization parameter to AUTODchange the backup retention policy to retain the backups for a smaller period of timeEincrease the value of the DB_RECOVERY_FILE_DEST_SIZE initialization parameterFincrease the value of the CONTROL_FILE_RECORD_KEEP_TIME initialization parameter
多选题ou are using the flash recovery area （fast recovery area in 11g Release 2） to store backup related files in your database. After regular monitoring of space usage in the Mash recovery area. You realize that the flash recovery area is （jetting filled up very fast and it is running out of space. Your database flash recovery area is low on specie and you have no more room on disk. Proactively， which two options could you use to make more space available in the flash recovery（）AChange the RMAN archived log deletion policy.BUse the RMAN CROSSCHECK command to reclaim the archived log space.CChange the RMAN retention policy to retain backups for a shorter period of time.DUse OS command to move files from the flash recovery area to some other location.
单选题You receive the following error： ORA-19804： cannot reclaim nnnnn bytes disk space from mmmmm limit Identify the reason for receiving the above error message？（）A The sort area is very small.B There is no more space in the Undo tablespace.C The flash recovery area is full.D The online redo log file is full.
多选题You configured the flash recovery area in the database. Which two files would you expect to find in the flash recovery area？ （）Abackup piecesBcontrol file autobackupsCcopies of all the parameter filesDtrace file generated using BACKUP CONTROLFILE TO TRACE
多选题Your database operates in ARCHIVELOG mode and all the tablespaces are online. Due to a user error， you decided to perform an incomplete recovery. Which two tasks would you be required to perform in the recovery process？（）Aopen the database with the RESTRICTED optionBopen the database with the RESETLOGS optionCrecover to the required SCN only that data file in which the error occurredDrecover all the data files to the same system change number （SCN）
多选题You are using the flash recovery area (fast recovery area in 11g Release 2) to store backup related files in your database. After regular monitoring of space usage in the Mash recovery area. You realize that the flash recovery area is jetting filled up very fast and it is running out of space. Your database flash recovery area is low on space and you have no more room on disk. Proactively, which two options could you use to make more space available in the flash recovery？（）AChange the RMAN archived log deletion policyBUse the RMAN CROSSCHECK command to reclaim the archived log spaceCChange the RMAN retention policy to retain backups for a shorter period of timeDUse OS command to move files from the flash recovery area to some other location
单选题You executed the following command to perform a backup of the USERS tablespace： SQL ALTER TABLESPACE users BEGIN BACKUP； ALTER TABLESPACE users BEGIN BACKUP * ERROR at line 1： ORA-01123： cannot start online backup； media recovery not enabled What could be the reason for this error（）AThe MTTR Advisor is disabled.BThe database is in NOARCHIVELOG mode.CThe tablespace is already in backup mode.DThe Flash Recovery Area is not configured.
单选题You decided to change the location of the flash recovery area. You executed the following command： ALTER SYSTEM SET DB_RECOVERY_FILE_DEST=’+disk1’ SCOPE=BOTH SID=’*’； Which statement is true？（）A The location can be changed only if the flash recovery area is empty.B After executing the command， all new flash recovery area files will be created in the new location.C The command will generate an error because you cannot change the flash recovery area while the database is open.D All the existing files in the flash recovery area will be moved to the new location and all new Flash Recovery Area files will be created in the new location.
单选题Every Sunday， consistent backups are performed on your database. Because of a user error， you performed an incomplete recovery on Tuesday and opened the database with the RESETLOGS option. A user error occurs again on Thursday， which necessitates an incomplete recovery. Sunday’s backup is the most recent backup available. What would you do in this scenario？（）Arecovery cannot be performed because a backup was not performed after the last incomplete recoveryBrestore all the files from Sunday’s backup， and then perform an incomplete recovery up to the point in time when the user error occurred on ThursdayCrestore all the files from Sunday’s backup， and then recover up to the point in time when the RESETLOGS operation was performed on TuesdayDrestore all the files from Sunday’s backup， and open the database to reset the database to the point in time when the backup was performed on Sunday