多选题R1, an ABR between backbone area 0 and area 1, has intra - area routes in area 0 for 10.1.1.0/24,10.1.2.0/24, and 10.1.3.0/24. These routes have metrics of 21, 22, and 23, respectively. An engineer then adds the area 0 r ange 10.1.0.0 255.255.0.0 command under the OSPF process of R1. Which of the following is true?（）AR1 loses and then re - establishes neighborships with all neighbors.BR1 no longer advertises 10.1.1.0/24 to neighbors into area 1.CR1 advertises a 1 0.1.0.0/16 route into area 1 with a metric of 23 (largest metric).DR1 advertises a 10.1.0.0/16 route into area 1 with metric of 21 (lowest metric).
多选题
R1, an ABR between backbone area 0 and area 1, has intra - area routes in area 0 for 10.1.1.0/24,10.1.2.0/24, and 10.1.3.0/24. These routes have metrics of 21, 22, and 23, respectively. An engineer then adds the area 0 r ange 10.1.0.0 255.255.0.0 command under the OSPF process of R1. Which of the following is true?（）
A
R1 loses and then re - establishes neighborships with all neighbors.
B
R1 no longer advertises 10.1.1.0/24 to neighbors into area 1.
C
R1 advertises a 1 0.1.0.0/16 route into area 1 with a metric of 23 (largest metric).
D
R1 advertises a 10.1.0.0/16 route into area 1 with metric of 21 (lowest metric).
参考解析
解析：
暂无解析
相关考题：
路由器R1的拓扑连接和地址分配如下图所示，如果在R1上安装OSPF协议，运行命令：router ospf 200，则配置E0和E1端口的命令分别是______。A．network 10.1.1.0 255.255.255.0 area 0 network 192.168.1.0 255.255.255.0 area 1B．network 10.1.1.1 255.255.255.0 area 0 network 192.168.1.1 255.255.255.0 area 1C．network 10.1.1.255 0.0.0.8 area 0 network 192.168.1.255 0.0.0.8 area 1D．network 10.1.1.0 0.0.0．255 area 0.0.0.0 network 192.168.1.0 0.0.0.255 area 1
路由器R1的拓扑连接和地址分配如图1-9所示，如果在R1上安装OSPF协议，运行下列命令：router ospf 200，则配置E0和E1端口的命令分别是(40)。A．network 10.1.1.0 255.255.255.0 area 0 network 192.168.1.0 255.255.255.0 area 1B．network 10.1.1.1 255.255.255.0 area 0 network 192.168.1.1 255.255.255.0 area 1C．network 10.1.1.255 0.0.0.8 area 0 network 192.168.1.255 0.0.0.8 area 1D．network 10.1.1.0 0.0.0.255 area 0.0.0.0 network 192.168.1.0 0.0.0.255 area 1
ABR R1 has been configured with an area 1 stub no － summary command. Which stubby area type is area 1?() A. StubB. Totally stubbyC. NSSAD. Totally NSSA
Refer to the exhibit. What is the effect of the OSPF configuration on router B?() A. All interfaces will be in area 0B. The router will be an ABR with s1/0 in area 0 and f0/0 and 0/1 in area 1C. The route r will be an ABR with s1/0 in area 0 and f0/0 and 0/1 in area 2D. The router will be an ABR with s1/0 in area 0, f0/0 in area 1, and f0/1 in area 2
Refer to the exhibit. OSPF is configured on all routers in the network. On the basis of the show ip ospf n eighbor output, what prevents R1 from establishing a full adjacency with R2? () A. Router R1 will only establish full adjacency with the DR and BDR on broadcast multi- access networks.B. Router R2 has been elected as a DR for the broadcast multiaccess network in OSPF area 1.C. Routers R1 and R2 are configured as stub routers for OSPF area 1 and OSPF area 2.D. Router R1 and R2 are configured for a virtual link between OSPF area 1 and OSPF area 2.E. The Hello parameters on routers R1 and R2 do not m atch.
Which of the following are characteristics of OSPF areas?() A. Hierarchical OSPF networks need to be in one areaB. Multiple OSPF areas must connect to area 0C. Single area OSPF networks must be configured in area 1D. Areas can be assigned any number from 0 to 63535E. Area 0 is called the backbone areaF. Each OSPF area need to be configured with a loopback interface
Refer to the exhibit. During the process of configuring a virtual link to connect area 2 with the backbone area, the network administrator received this console message on R3:*Mar 1 00:2 5:01.084: %OSPF -4- ERRRCV: Received invalid packet: mismatch area ID, from backbone area must be virtual link but not found from 20.20.20.1, Serial 0 .How should the virtual link be configured on the OSPF routers to establish full connectivity between the areas?（）A.R1(config - router)# area 0 virtual - link 1.1.1.1R3(config - router)# area 2 virtual - link 3.3.3.3B.R1(config - router)# area 1 virtual - link 2.2.2.2 R3(config - router)# area 1 virtual - link 2.2.2.2C.R1(config - router)# area 1 virtual - link 20.20 .20.2 R3(config - router)# area 1 virtual - link 30.30.30.2D.R1(config - router)# area 1 virtual - link 30.30.30.3 R3(config - router)# area 1 virtual - link 20.20.20.1E.R1(config - router)# area 1 virtual - link 3.3.3.3 R3(config - router)# area 1 virtual - link 1.1 .1.1
路由器R1的拓扑连接和地址分配如图5-3所示，如果在R1上安装OSPF协议，运行命令router ospf 200，则配置E0和E1端口的命令分别是(26)。A．network 10.1.1.0255.255.255.0 area0 network 192.168.1.0 255.255.255.0 area 1B．network 10.1.1.1 255.255.255.0 area0 network 192.168.1.1 255.255.255.0 area 1C．network 10.1.1.255 0.0.0.8 area 0 network 192.168.1.255 0.0.0.8 area 1D．network 10.1.1.0 0.0.0.255 area 0.0.0.0 network 192.168.1.0 0.0.0.255 area 1
From a design perspective which two of the following OHPF Statements are most relevant？（）A、 OSPF stub areas can be thought of as a simple form of summarizationB、 OSPF cannot filter intra area routesC、 An ARR ran only exist in two areas - the backbone and one adjacent areaD、 Performance issues in the Backbone area can be offset by allowing some traffic to transit anon-backbone areaE、 the size of an area （the LSDB） will be constrained by the size of the IP MTU
R1, an ABR between backbone area 0 and area 1, has intra - area routes in area 0 for 10.1.1.0/24,10.1.2.0/24, and 10.1.3.0/24. These routes have metrics of 21, 22, and 23, respectively. An engineer then adds the area 0 r ange 10.1.0.0 255.255.0.0 command under the OSPF process of R1. Which of the following is true?（）A、R1 loses and then re - establishes neighborships with all neighbors.B、R1 no longer advertises 10.1.1.0/24 to neighbors into area 1.C、R1 advertises a 1 0.1.0.0/16 route into area 1 with a metric of 23 (largest metric).D、R1 advertises a 10.1.0.0/16 route into area 1 with metric of 21 (lowest metric).
R1 is internal to area 1, and R2 is internal to area 2. Subnet 10.1.1.0/24 exists in area 2 as a connected subnet off R2. ABR ABR1 connects area 1 to backbone area 0, and ABR2 c onnects area 0 to area 2. Which of the following LSAs must R1 use when calculating R1's best route for 10.1.1.0/24?（）A、R2's Type 1 LSAB、Subnet 10.1.1.0/24's Type 2 LSAC、ABR1's Type 1 LSA in area 0D、Subnet 10.1.1.0/24's Type 3 LSA in Area 0E、 Subnet 10.1.1.0/24's Type 3 LSA in Area 1
Router R1, an ASBR connected to the Internet and to backbone area 0, has been configured with a default - information originate command. Which of the following is true about the effects of this configuration command?（）A、R1 will always create and flood a default route into the OSPF domain.B、R1 will create and flood an LSA for prefix/length 0.0. 0.0/0 into the OSPF domain if R1's IP routing table has a route to 0.0.0.0/0.C、R1 will set a flag on the LSA for the subnet between itself and one of the ISPs, noting this subnet as a default network, regardless of whether R1 has a default route.D、R1 w ill set a flag on the LSA for the subnet between itself and one of the ISPs, noting this subnet as a default network, but only if R1 has a route to 0.0.0.0/0.
A network de sign shows area 1 with three internal routers, area 0 with four internal routers, and area 2 with five internal routers. Additionally, one ABR (ABR1) connects areas 0 and 1, plus a different ABR (ABR2) connects areas 0 and 2. How many Type 1 LSAs would b e listed in ABR2's LSDB?（）A、6B、7C、15D、12E、None of the other answers is correct.
Which of the following are characteristics of OSPF areas?（）A、Hierarchical OSPF networks need to be in one areaB、Multiple OSPF areas must connect to area 0C、Single area OSPF networks must be configured in area 1D、Areas can be assigned any number from 0 to 63535E、Area 0 is called the backbone areaF、Each OSPF area need to be configured with a loopback interface
Area Border Router （ABR） is a router located on the border of one or more OSPF areas that connect those areas to the backbone network. An ABR will inject a default route into which two types of areas？（）A、Area 0B、NSSAC、Totally stubbyD、Stub
The following command output was gathered from Router R1, an ABR between areas 0 (backbone) and area 1. In this internetwork, area 0 contains all the subnets of cla ss A network 10.0.0.0. R1's OSPF process has a distribute - list prefix question in command configured. Assuming the subnets listed in the answers actually exist in area 0. Which of the following occurs on router R1?（） R1#sh ip prefix - list ip prefix - list question: 4 entries seq 5 deny 10.1.2.0/24 ge 25 le 27 seq 15 deny 10.2.0.0/16 ge 30 le 30 seq 20 permit 0.0.0.0/0 le 32A、R1 will not create/flood a type 3 LSA for subnet 10.1.2.0/26 into area 1B、R1 will not create/flood a Type 3 LSA for subnet 1 0.1.2.0/24 into area 1C、R1 will not have an OSPF route for subnet 10.1.2.0/26 in its IP routing tablED、R1 will not have an OSPF route for subnet 10.1.2.0/24 in its IP routing tablE
Which of the following is true about an OSPF area border router (ABR)?（）A、The ABR must have multiple interfaces connected to the backbone areAB、An ABR is a router with two interfaces, each connected to a different nonbackbone areAC、The only requirement to be considered an ABR is at least one interface connected to the backbone areAD、An ABR must have at least one interface in the backbone area plus at least one other interface in a nonbackbone areA
单选题ABR R1 has been configured with an area 1 stub no - summary command. Which stubby area type is area 1?（）AStubBTotally stubbyCNSSADTotally NSSA
单选题Router R1, an ASBR connected to the Internet and to backbone area 0, has been configured with a default - information originate command. Which of the following is true about the effects of this configuration command?（）AR1 will always create and flood a default route into the OSPF domain.BR1 will create and flood an LSA for prefix/length 0.0. 0.0/0 into the OSPF domain if R1's IP routing table has a route to 0.0.0.0/0.CR1 will set a flag on the LSA for the subnet between itself and one of the ISPs, noting this subnet as a default network, regardless of whether R1 has a default route.DR1 w ill set a flag on the LSA for the subnet between itself and one of the ISPs, noting this subnet as a default network, but only if R1 has a route to 0.0.0.0/0.
单选题A network de sign shows area 1 with three internal routers, area 0 with four internal routers, and area 2 with five internal routers. Additionally, one ABR (ABR1) connects areas 0 and 1, plus a different ABR (ABR2) connects areas 0 and 2. How many Type 1 LSAs would b e listed in ABR2's LSDB?（）A6B7C15D12ENone of the other answers is correct.
多选题From a design perspective which two of the following OHPF Statements are most relevant？（）AOSPF stub areas can be thought of as a simple form of summarizationBOSPF cannot filter intra area routesCAn ARR ran only exist in two areas - the backbone and one adjacent areaDPerformance issues in the Backbone area can be offset by allowing some traffic to transit anon-backbone areaEthe size of an area （the LSDB） will be constrained by the size of the IP MTU
单选题R1 is internal to area 1, and R2 is internal to area 2. Subnet 10.1.1.0/24 exists in area 2 as a connected subnet off R2. ABR ABR1 connects area 1 to backbone area 0, and ABR2 c onnects area 0 to area 2. Which of the following LSAs must R1 use when calculating R1's best route for 10.1.1.0/24?（）AR2's Type 1 LSABSubnet 10.1.1.0/24's Type 2 LSACABR1's Type 1 LSA in area 0DSubnet 10.1.1.0/24's Type 3 LSA in Area 0E Subnet 10.1.1.0/24's Type 3 LSA in Area 1
单选题Which of the following is true about an OSPF area border router (ABR)?（）AThe ABR must have multiple interfaces connected to the backbone areABAn ABR is a router with two interfaces, each connected to a different nonbackbone areACThe only requirement to be considered an ABR is at least one interface connected to the backbone areADAn ABR must have at least one interface in the backbone area plus at least one other interface in a nonbackbone areA
单选题The following command output was gathered from Router R1, an ABR between areas 0 (backbone) and area 1. In this internetwork, area 0 contains all the subnets of cla ss A network 10.0.0.0. R1's OSPF process has a distribute - list prefix question in command configured. Assuming the subnets listed in the answers actually exist in area 0. Which of the following occurs on router R1?（） R1#sh ip prefix - list ip prefix - list question: 4 entries seq 5 deny 10.1.2.0/24 ge 25 le 27 seq 15 deny 10.2.0.0/16 ge 30 le 30 seq 20 permit 0.0.0.0/0 le 32AR1 will not create/flood a type 3 LSA for subnet 10.1.2.0/26 into area 1BR1 will not create/flood a Type 3 LSA for subnet 1 0.1.2.0/24 into area 1CR1 will not have an OSPF route for subnet 10.1.2.0/26 in its IP routing tablEDR1 will not have an OSPF route for subnet 10.1.2.0/24 in its IP routing tablE
多选题Area Border Router （ABR） is a router located on the border of one or more OSPF areas that connect those areas to the backbone network. An ABR will inject a default route into which two types of areas？（）AArea 0BNSSACTotally stubbyDStub