单选题An engineer has added the following configuration snippet to an implementation planning document. The configuration will be added to Router R1, whose Fa0/0 interface connects to a LAN to which Routers R2 and R3 also connect. R2 and R3 are already EIGRP neighbors with each of her. Assuming the snippet shows all commands on R1 related to EIGRP authentication, which answer lists an appropriate comment to be made during the implementation plan peer review?() key chain fred key 3 key - string whehew interface fa0/0 ip authenticat ion key - chain eigrp 9 fredAThe configuration is missing one authentication - related configuration commandBThe configuration is missing two authentication - related configuration commandsCAuthentication type 9 is not supported; type 5 should be u sed insteaDDThe key numbers must begin with key 1, so change the key 3 command to key 1

单选题
An engineer has added the following configuration snippet to an implementation planning document. The configuration will be added to Router R1, whose Fa0/0 interface connects to a LAN to which Routers R2 and R3 also connect. R2 and R3 are already EIGRP neighbors with each of her. Assuming the snippet shows all commands on R1 related to EIGRP authentication, which answer lists an appropriate comment to be made during the implementation plan peer review?() key chain fred key 3 key - string whehew interface fa0/0 ip authenticat ion key - chain eigrp 9 fred
A

The configuration is missing one authentication - related configuration command

B

The configuration is missing two authentication - related configuration commands

C

Authentication type 9 is not supported; type 5 should be u sed insteaD

D

The key numbers must begin with key 1, so change the key 3 command to key 1


参考解析

解析: 暂无解析

相关考题:

Referring to the exhibit, what are two differences between the active and candidate configurations?() A. The ge-0/0/0 interface was added to the candidate configuration.B. Area 0 was added to the active configuration.C. Area 1 was added to the candidate configuration.D. The ge-0/0/0 interface was added to the active configuration.

An engineer is reviewing another engineer‘s sample configuration for a GRE tunnel used to pass IPv6 traffiC. The tunnel ha s not yet been configured on the router.Which of the following commands is not required for the configuration to pass IPv6 traffic?()A. tunnel sourceB. tunnel destinationC. tunnel modeD. All these commands are requireD

An engineer is preparing an implementation plan in which the configuration needs to influence BGP‘s choice of best path.Which of the following is least likely to be used by the configuration in this imple mentation plan?()A. WeightB. Origin codeC. AS_PathD. Local_Pref

Refer to the exhibit. A new TAC engineer came to you for advice. A GRE over IPsec tunnel was configured, but the tunnel is not coming up. W hat did the TAC engineer configure incorrectly?() A. The crypto isakmp configuration is not correct.B. The crypto map configuration is not correct.C. The interface tunnel configuration is not correct.D. The network configuration is not correct; netw ork 172.16.1.0 is missing.

An engineer has added the following configuration snippet to an implementation planning document. The configuration will be added to Router R1, whose Fa0/0 interface connects to a LAN to which Routers R2 and R3 also connect. R2 and R3 are already EIGRP neighbors with each of her. Assuming the snippet shows all commands on R1 related to EIGRP authentication, which answer lists an appropriate comment to be made during the implementation plan peer review?() key chain fred key 3 key - string whehew interface fa0/0 ip authenticat ion key - chain eigrp 9 fredA、The configuration is missing one authentication - related configuration commandB、The configuration is missing two authentication - related configuration commandsC、Authentication type 9 is not supported; type 5 should be u sed insteaDD、The key numbers must begin with key 1, so change the key 3 command to key 1

On router R1, which three of the following protocols will be forwarded to a host specified by the "iphelper-address" interface configuration command if the configuration has not been modified by the"ip forward-protocol udp" global configuration command?()A、BOOTPB、TFTPC、ARPD、DNSE、proxy-ARPF、FTPG、CDP

A switch has been configured with two vlans and is connected to a router with a trunk for inter-vlan routing.OSPF has been configured on the router,as the routing protocol for the network.Which statement about thisnetwork is true?()A、For the two vlans to communicate,a network statement for the trunk interface needs to be added to the OSPF configuration.B、For the two vlans to communicate, a network statement for each subinterface needs to be  added  to the OSPF configuration.C、Direct inter-vlan communication does not require OSPFD、OSPF cannot be used if router-on-a-stick is configured on the router

Which three of the following protocols will be forwarded to a host specified by the ip helper - address interface configuration command if the configuration has not been modified by the ip forward - protocol udp global con figuration command?()A、BOOTPB、TFTPC、ARPD、DNSE、proxy - ARPF、FTP

The technician has suspicions that a browser has been hijacked. Which of the following should the technician look for in this situation?()A、A new default gateway has been setup.B、A new Internet shortcut has been added.C、A new web browser has been installed and is now the default.D、A proxy server has been enabled.

Router R1 has been configured with the commands rout er eigrp 9 and network 172.16.2.0 0.0.0.255, with no other current EIGRP configuration. R1's (working) Fa0/0 interface has been configured with IP address 172.16.2.2/26. R1 has found three EIGRP neighbors reachable via interface Fa0/0, including the rou ter with IP address 172.16.2.20. When the engineer attempts to add the neighbor 172.16.2.20 fa0/0 command in EIGRP configuration mode. Which of the following occurs?()A、Fa0/0 failsB、The command is rejecteDC、The existing three neighbors failD、The neighborship with 172.16.2.20 fails and then reestablishesE、None of the other answers is correct

The following configuration exists on a router on one end of an IPv6 tunnel. Although the configuration added so far is correct, the configuration is incomplete. Which type of tunnel is most likely to be intended by the network engineer?() interface loopback 1 ip address 192.168.1.1 255.255.255.255 interface tunnel 2 ipv6 address 2002:C0A8:10 1::1/64 tunnel source loopback 1A、Automatic 6to4B、Manually configured tunnelC、ISATAPD、GRE

An engineer is preparing an implementation plan in which the configuration needs to influence BGP's choice of best path. Which of the following is least likely to be used by the configuration in this imple mentation plan?()A、WeightB、Origin codeC、AS_PathD、Local_Pref

As an experienced Network Engineer, you are responsible for network connectivity and system configuration. Which of the following protocols will be supported by Cisco Nonstop Forwarding (NSF)?()A、ISSU,OSPF,IS-ISB、IETF,OSPF,ISSUC、IS-IS,EIGRP,SSO,BGPD、EIGRP,BGP,OSPF,IS-IS

An engineer plans to configure summary routes with the ip summary - address eigrp asn prefix mask command. Which of the following, when added to such a command, would create a summary that includes all four of the following subnets: 10.1.100.0/25, 10.1.101.96/27, 10.1.101.224/28, and 10.1.100.128.25?()A、10.1.0.0 255.255.192.0B、10.1.64.0 255.255.192.0C、10.1.100.0 255.255.255.0D、10.1.98.0 255.255.252.0

A new array of hard drives has been added to an existing server; however, when the server is booted into the Windows OS the new drives fail to appear in My Computer.  From which of the following locations can the new storage drives be added?()A、 Format commandB、 HypervisorC、 Computer ManagementD、 Disk ManagementE、 Virtual Center

A user’s workstation currently has four connected IDE devices. Which of the following could be added to the workstation to allow more ATA devices to be added to the workstation?()A、Network Interface cardB、Port expansion cardC、Serial interface cardD、Modem card

An administrator has recently added a VLAN to the VIO server and wants to update the documentation. Which command displays the current VIO server VLAN configuration?()A、lsmap -allB、lsmap -netC、lsmap -entD、lsmap -vlan

A customer has an 8-way p5-570 with eight internal disk drives and AIX 5.2.  Which of the following must be added, if anything, to the configuration to support four LPARs, assuming each LPAR requires twodisk drives?()A、7311-D20 drawer with four disksB、Upgrade to AIX 5.3C、Fiber adapters to attach to SAND、Nothing

A p5 570 12 way was purchased with the plan to install six LPARs running AIX 5.2. The machine has 12 disks spread evenly over the internal server drawers. The customer would now like to add a seventh LPAR. Which of the following should be added for the seventh LPAR boot device?()A、An additional 7311-D10 drawerB、An adapter to boot off a SAN deviceC、An additional disk to the media bayD、Two disks to the internal configuration

单选题As an experienced Network Engineer, you are responsible for network connectivity and system configuration. Which of the following protocols will be supported by Cisco Nonstop Forwarding (NSF)?()AISSU,OSPF,IS-ISBIETF,OSPF,ISSUCIS-IS,EIGRP,SSO,BGPDEIGRP,BGP,OSPF,IS-IS

单选题An engineer plans to configure summary routes with the ip summary - address eigrp asn prefix mask command. Which of the following, when added to such a command, would create a summary that includes all four of the following subnets: 10.1.100.0/25, 10.1.101.96/27, 10.1.101.224/28, and 10.1.100.128.25?()A10.1.0.0 255.255.192.0B10.1.64.0 255.255.192.0C10.1.100.0 255.255.255.0D10.1.98.0 255.255.252.0

单选题An engineer has added the following configuration snippet to an implementation planning document. The configuration will be added to Router R1, whose Fa0/0 interface connects to a LAN to which Routers R2 and R3 also connect. R2 and R3 are already EIGRP neighbors with each of her. Assuming the snippet shows all commands on R1 related to EIGRP authentication, which answer lists an appropriate comment to be made during the implementation plan peer review?() key chain fred key 3 key - string whehew interface fa0/0 ip authenticat ion key - chain eigrp 9 fredAThe configuration is missing one authentication - related configuration commandBThe configuration is missing two authentication - related configuration commandsCAuthentication type 9 is not supported; type 5 should be u sed insteaDDThe key numbers must begin with key 1, so change the key 3 command to key 1

多选题On router R1, which three of the following protocols will be forwarded to a host specified by the "iphelper-address" interface configuration command if the configuration has not been modified by the"ip forward-protocol udp" global configuration command?()ABOOTPBTFTPCARPDDNSEproxy-ARPFFTPGCDP

多选题A new array of hard drives has been added to an existing server; however, when the server is booted into the Windows OS the new drives fail to appear in My Computer. From which of the following locations can the new storage drives be added?()AFormat commandBHypervisorCComputer ManagementDDisk ManagementEVirtual Center

单选题An engineer is reviewing another engineer's sample configuration for a GRE tunnel used to pass IPv6 traffiC. The tunnel ha s not yet been configured on the router. Which of the following commands is not required for the configuration to pass IPv6 traffic?()Atunnel sourceBtunnel destinationCtunnel modeDAll these commands are requireD

单选题The technician has suspicions that a browser has been hijacked. Which of the following should the technician look for in this situation?()AA new default gateway has been setup.BA new Internet shortcut has been added.CA new web browser has been installed and is now the default.DA proxy server has been enabled.

单选题A switch has been configured with two vlans and is connected to a router with a trunk for inter-vlan routing.OSPF has been configured on the router,as the routing protocol for the network.Which statement about thisnetwork is true?()AFor the two vlans to communicate,a network statement for the trunk interface needs to be added to the OSPF configuration.BFor the two vlans to communicate, a network statement for each subinterface needs to be  added  to the OSPF configuration.CDirect inter-vlan communication does not require OSPFDOSPF cannot be used if router-on-a-stick is configured on the router

多选题Which three of the following protocols will be forwarded to a host specified by the ip helper - address interface configuration command if the configuration has not been modified by the ip forward - protocol udp global con figuration command?()ABOOTPBTFTPCARPDDNSEproxy - ARPFFTP