单选题An existing cluster has an application node and database node. Changes in the application require both nodes to have access to the other’s data all of the time. Which facility managed by HACMP can be implemented with the least amount of impact？（）A NFSB AFSC DFSD GPFS
单选题
An existing cluster has an application node and database node. Changes in the application require both nodes to have access to the other’s data all of the time. Which facility managed by HACMP can be implemented with the least amount of impact？（）
A
NFS
B
AFS
C
DFS
D
GPFS
参考解析
解析：
暂无解析
相关考题：
A customer has a resource group rg1 configured on a two node cluster with the following policies：The customer has observed the following scenarios as nodes join the cluster during cluster start up. Scenario 1 Node1 joins cluster as first node - rg1 is acquired by Node1 Node2 joins cluster as second node - rg1 ismoved from Node1 to Node2 Scenario 2 Node2 joins cluster as first node - rg1 is acquired by Node2 Node1 joins cluster as second node - rg1 remainson Node2 Which of the following is the reason for this behavior？（）A、rg1 is configured with a delayed fallback timerB、Settling time policy has not been configured for rg1C、Node1 does not have sufficient resources to support rg1D、Node2 is the first in the ’Default Node Priority’ list for resource group rg1
Company.com has a six-node concurrent resource group with an application that is accessed by a web connection to the cluster nodes. How is the workload moved to another cluster node during a node failure？（） A、 The concurrent application must control the web interface through application monitoring.B、 A second resource group will be required to move the web application and IP label to a new node during a node failure.C、 The concurrent resource group can support multiple IP labels through IP aliasing so all IP labels are defined in the concurrent resource group.D、 The dynamic node priority facility in HACMP will relocate the web application and the IP label，if it is correctly defined in the application start and stop script.
A cluster node has a failed fibre adapter requiring the node to be halted to replace it. To minimize downtime， what is the appropriate method of performing this repair？（）A、 Perform the cIRGmove command to move the node’s resources to another cluster node.B、 Perform a graceful stop of the cluster，replace the adapter，and restart the cluster.C、 Perform a force stop of the cluster node，replace the adapter，and restart the cluster. D、 Perform a graceful takeover of the cluster，replace the adapter，and restart the cluster.
A three-node cluster experienced a node failure. The resource groups were acquired as cexpected. The node has been repaired，and HACMP has been restarted. How does the operator determine that the node has successfully re-integrated into the cluster？（） A、 Use the clstat command.B、 Use the cIRGinfor command.C、 Tail the /etc/hacmp.out file and wait for "node_up_complete" to finish successfully.D、 Tail the /usr/es/adm/cluster.log file and wait for "node_up_complete" to finish successfully.
An existing cluster has an application node and database node. Changes in the application require both nodes to have access to the other’s data all of the time. Which facility managed by HACMP can be implemented with the least amount of impact？（） A、 NFSB、 AFSC、 DFSD、 GPFS
A new administrator is performing fallover testing on a two-node cluster and is concerned that the cascading resource group belonging to Node ’A’ did not reintegrate properly after the cluster was restarted on Node ’A’. A stable cluster is reported by clstat，and clRGinfo reports the resource group online on Node ’B’. What type of configuration would cause this type of behavior？（） A、 The resource group DNP has been configured.B、 The resource group option CWOF has been enabled.C、 The resource group option Inactive Takeover is set.D、 A resource group fallback timer has been configured.
During cluster fallover testing，the administrator determines that additional work is required to stop existing test applications on the standby node，prior to starting the production applications on the surviving node. To manage this type of requirement，which step should be performed first？（） A、 Create a custom pre/post event.B、 Add a custom user defined event.C、 Define custom error notification.D、 Modify the test application server.
An administrator has made several topology and resource group changes on one node in a running cluster.During verification and synchronization， using the "Emulate" option， many errors are reported. Theadministrator decided the best course of action was to roll back the changes. Prior to the changes beingmade， a cluster snapshot was taken. Which of the following actions will roll back the changes with the least disruption？（）A、Perform a synchronization from a node without the changes.B、Apply the cluster snapshot on both nodes while the cluster is running.C、"Restore HACMP Configuration Database from Active Configuration" on the node where the changes weremadeD、Stop the cluster using the option "Unmanage Resource Groups" and apply the cluster snapshot on thenode where the changes were made
An enterprise has three nodes： -Node ’A’ is a production database， -Node ’B’ is a production Application server， and -Node ’C’ is a test and development node. Node ’C’ is used by six programmers to develop and the production application as business critical and would like to make it highly available with HACMP. Application development and testing is not business critical. Which of the following describes the best solution？（） A、 There is not an adequate solution because HACMP should not be configured in this environment without a dedicated standby node.B、 Nodes ’A’ and ’B’ should be configured in a cluster with mutual fallover of two cascading resource groups to provide both nodes will deliver acceptable response time with both resource groups.C、 Nodes ’A’ and ’C’ should be configured in one cluster， and Nodes ’B’ and ’C’ in another cluster to prevent both the database and application server from falling over to Node ’C’ at the same time.D、 Nodes ’A’， ’B’， and ’C’ should be configured in a cluster with Node ’C’ the hot standby for both the database and application server resource groups. Workload Manager （WLM） must be configured on database and application developers from over utilizing the CPU resources.
During initial cluster planning session， a requirement is mandated that application monitoring will Be used to monitor the production database and three application servers. Since all the application servers rely on the database being active， only one resource group has been planned to manage the starting/stopping of the cluster resources. How ill the initial design impact the use of application monitoring？（） A、 Only one application server per resource group can be monitored.B、 Process monitoring is part of RSCT and requires no special scripts.C、 Any application can be monitored as long as it has an application server.D、 Having all application servers in one resource group improves recovery time.
An enterprise has two nodes： -Node ’A’ runs a large relational database and ha six CPUs and 32GB of memory. -Node ’B’ is an application server with three CPU’s and 16GB of memory. During peak production periods， the CPU load for Node ’A’ is normally between 30% and 40%. For Node ’B’， the CPU load is 10% to 20% during peak production periods. Which of the following describes the best solution for an HACMP cluster？（） A、 Two cluster with two resource groups in a mutual takeover configuration.B、 One cluster with two cascading resource groups in a mutual takeover configuration.C、 One cluster with two rotating resource groups in a one-sided hot standby configuration.D、 Two clusters with two resource groups in a hot-standby configuration with a newly acquired third node.
An HACMP cluster has three nodes of unequal size. The largest node is Node ’A’. The primary application on Node ’A’ has two components. One component is memory intensive， the other is IO intensive. Nodes ’B’ and ’C’ are running web servers and databases that access information produced by applications on Node ’A’. The customer requires the most performance from the primary application and wants all nodes available for fallover processing. Which of the following is the best solution for meeting the customer requirements？（） A、 Use nodes of equal size.B、 Create multiple resource groups and use loadlever.C、 Use dynamic node priority to manage resource groups.D、 Use an ordered list to manage resource group fallover.
How can an Oracle WebLogic cluster’s capacity be increased ？（）A、 by adding server instances to the cluster on an existing machineB、 by adding machines to host server for more clustered instancesC、 by adding machines to the cluster to host the incremental server instancesD、 by adding node managers to an existing machine
You are the network administrator for your company. The network consists of a single Active Directory domain. All computers on the network are members of the domain. You administer a Network Load Balancing cluster that consists of three nodes. Each node runs Windows Server 2003 and contains a single network adapter. The Network Load Balancing cluster can run only in unicast mode. The Network Load Balancing cluster has converged successfully. To increase the utilization of the cluster， you decide to move a particular application to each node of the cluster. For this application to run， you must add a Network Load Balancing port rule to the nodes of the cluster. You start Network Load Balancing Manager on the second node of the cluster. However， Network Load Balancing Manager displays a message that it cannot communicate with the other two nodes of the cluster. You want to add the port rule to the nodes of the cluster. What should you do？ （）A、 Use Network Load Balancing Manager on the Network Load Balancing default host to add the port rule.B、 Change the host priority of the second node to be the highest in the cluster， and then use Network Load Balancing Manager to add the port rule.C、 Run the nlb.exe drain command on each node， and then use Network Load Balancing Manager to add the port rule.D、 Add the port rule through Network Connections Properties on each node.
You are the network administrator for your company. The network consists of a single Active Directory domain. All computers on the network are members of the domain. You administer a three-node Network Load Balancing cluster. Each cluster node runs Windows Server 2003 and has a single network adapter. The cluster has converged successfully. You notice that the nodes in the cluster run at almost full capacity most of the time. You want to add a fourth node to the cluster. You enable and configure Network Load Balancing on the fourth node. However， the cluster does not converge to a four-node cluster. In the System log on the existing three nodes， you find the exact same TCP/IP error event. The event has the following description： "The system detected an address conflict for IP address 10.50.8.70 with the system having network hardware address 02：BF://0A：32：08：46." In the System log on the new fourth node， you find a similar TCP/error event with the following description： "The system detected an address conflict for IP address 10.50.8.70 with the system having network hardware address 03：BF://0A：32：08：46." Only the hardware address is different in the two descriptions. You verify that IP address 10.50.8.70 is configured as the cluster IP address on all four nodes. You want to configure a four-node Network Load Balancing cluster. What should you do？ （）A、 Configure the fourth node to use multicast mode.B、 Remove 10.50.8.70 from the Network Connections Properties of the fourth node.C、 On the fourth node， run the nlb.exe resume command.D、 On the fourth node， run the wlbs.exe reload command.
You are a network administrator for your company. The network contains four Windows Server 2003 computers configured as a four-node server cluster. Each cluster node is the preferred owner of a clustered instance of Microsoft SQL Server 2000， and each cluster node is configured as a possible owner of all other instances of SQL Server. All nodes have identically configured hardware. All four nodes operate at a sustained 70 percent CPU average. You add a server that has identically configured hardware to the cluster as a fifth node. You want each SQL Server instance to continue operating at the same level of performance in the event of a single node failure. What should you do？ （）A、 Clear the Affect group check box in the cluster resource properties for each SQL Server instance.B、 Configure the fifth node as the only possible owner other than the existing preferred owner of the cluster resources that are associated with each SQL Server instance.C、 Configure the fifth node as the preferred owner of each cluster group that contains an SQL Server instance.D、 Enable failback on each group that contains an SQL Server instance.
You are configuring a failover cluster for a database server. You are assigning four nodes to the cluster. Allnodes have access to a SAN，and adequate storage is available. Which of the following options should youchoose for your quorum configuration？（）A、Node MajorityB、Node And Disk MajorityC、Node And File Share MajorityD、No Majority： Disk Only
Company.com has a two-node HACMP cluster with a single cascading resource group. Node ’A’ is the normal production node， and Node ’B’ is the standby node. One of the first steps in the HACMP test plan is to start the cluster and to verify that al elements for the resource group have been acquired. The administrator who is conducting the HACMP test starts the HACMP daemons on Node ’B’ with the ’smitty clstart" command. The administrator notices that Node ’B’ acquires the elements of the resource group， including a service IP labels，a shared volume group， and an application server that has been started. The expectation was that Node ’B’ would enter the cluster in a standby status， rather than acquiring production resources. What should the administrator do to correct this problem？（） A、 Change the cluster to a rotating design.B、 Change the Cascading without Fallback flag to true.C、 Change the Inactive Takeover field to false in the cluster configuration.D、 Nothing should be done. This is the default behavior for cascading resource groups，and node ’A’ should have been started first.
You work in a company which uses SQL Server 2008. You are the administrator of the company database. Now you are in charge of a SQL Server 2008 cluster. According to the company requirement, the failover response of the cluster has to be tested. The company assigns this task to you. On the cluster, you have to implement a manual failover. What should you do? （） A、The contents of a shared folder on the active node should be encrypted by using Encrypting File System (EFS) B、You should restore a backup to the active node C、You should get rid of the shared array from the active node D、From the active node, you have to uplug the network cable(s)
单选题You have a server that runs Windows Server 2008 Enterprise Edition. The server has the Failover Clustering feature installed. The server has three nodes named NODE1， NODE2， and NODE3. The Microsoft Distributed Transaction Coordinator （MSDTC） resource is installed on the cluster. The cluster has a dedicated cluster group named Group1 that includes the MSDTC resource. You discover that Group1 is unable to failover to NODE3 from NODE1 or NODE2. The failover from NODE1 to NODE2 functions without errors. You need to configure Group1 to support the failover between all cluster nodes. What should you do？（）ARemove the MSDTC resource from Group1.BSelect NODE3 as a preferred owner for Group1.CRemove NODE3 as a possible owner from all cluster resources in Group1.DConfigure NODE3 as a possible owner for all cluster resources in Group1.
单选题Node ’C’ has just completed reintegration in a three-node cluster. The hacmp.out logifle displays The event node_up_complete for Node ’C’. The cluster administrator wishes to verify that the cluster is stable. In addition to reviewing the cluster log files，what utility should be run to verify the cluster state？（）A clstatB clinfoC cldiagD clverify
单选题A three-node cluster experienced a node failure. The resource groups were acquired as cexpected. The node has been repaired，and HACMP has been restarted. How does the operator determine that the node has successfully re-integrated into the cluster？（）A Use the clstat command.B Use the cIRGinfor command.C Tail the /etc/hacmp.out file and wait for node_up_complete to finish successfully.D Tail the /usr/es/adm/cluster.log file and wait for node_up_complete to finish successfully.
多选题How can an Oracle WebLogic cluster’s capacity be increased ？（）Aby adding server instances to the cluster on an existing machineBby adding machines to host server for more clustered instancesCby adding machines to the cluster to host the incremental server instancesDby adding node managers to an existing machine
单选题The en0 interface on Node1 of a two-node cluster has failed. This adapter is configured with a boot addressand under stable operations also has the service address of the cluster’s single resource group. The resourcegroup is configured with the fallback option. The HA network was configured for IPAT via aliasing and now theservice address is on the en1 interface in the cluster. The en0 interface has already been physically replacedand configured with the boot address. Which of the following will return the cluster to its original state andminimize cluster downtime？（）ARun cluster synchronization.BRestart cluster services on Node1.CPerform a swap_adapter using C-SPOCDRestart cluster services on both nodes
单选题Company.com has a two-node HACMP cluster with a single cascading resource group. Node ’A’ is the normal production node， and Node ’B’ is the standby node. One of the first steps in the HACMP test plan is to start the cluster and to verify that al elements for the resource group have been acquired. The administrator who is conducting the HACMP test starts the HACMP daemons on Node ’B’ with the ’smitty clstart" command. The administrator notices that Node ’B’ acquires the elements of the resource group， including a service IP labels，a shared volume group， and an application server that has been started. The expectation was that Node ’B’ would enter the cluster in a standby status， rather than acquiring production resources. What should the administrator do to correct this problem？（）A Change the cluster to a rotating design.B Change the Cascading without Fallback flag to true.C Change the Inactive Takeover field to false in the cluster configuration.D Nothing should be done. This is the default behavior for cascading resource groups，and node ’A’ should have been started first.
单选题A customer has a resource group rg1 configured on a two node cluster with the following policies：The customer has observed the following scenarios as nodes join the cluster during cluster start up. Scenario 1 Node1 joins cluster as first node - rg1 is acquired by Node1 Node2 joins cluster as second node - rg1 ismoved from Node1 to Node2 Scenario 2 Node2 joins cluster as first node - rg1 is acquired by Node2 Node1 joins cluster as second node - rg1 remainson Node2 Which of the following is the reason for this behavior？（）Arg1 is configured with a delayed fallback timerBSettling time policy has not been configured for rg1CNode1 does not have sufficient resources to support rg1DNode2 is the first in the ’Default Node Priority’ list for resource group rg1
单选题During initial cluster planning session， a requirement is mandated that application monitoring will Be used to monitor the production database and three application servers. Since all the application servers rely on the database being active， only one resource group has been planned to manage the starting/stopping of the cluster resources. How ill the initial design impact the use of application monitoring？（）A Only one application server per resource group can be monitored.B Process monitoring is part of RSCT and requires no special scripts.C Any application can be monitored as long as it has an application server.D Having all application servers in one resource group improves recovery time.