单选题What will happen if a private IP address is assigned to a public interface connected to an ISP?（）AAddresses in a private range will be not routed on the Internet backbone.BOnly the ISP router will have the capability to access the public network.CThe NAT process will be used to translate this address in a valid IP address.DSeveral automated methods will be necessary on the private network.EA conflict of IP addresses happens, because other public routers can use the same range.
单选题
What will happen if a private IP address is assigned to a public interface connected to an ISP?（）
A
Addresses in a private range will be not routed on the Internet backbone.
B
Only the ISP router will have the capability to access the public network.
C
The NAT process will be used to translate this address in a valid IP address.
D
Several automated methods will be necessary on the private network.
E
A conflict of IP addresses happens, because other public routers can use the same range.
参考解析
解析：
暂无解析
相关考题：
In a PPP over ATM service offering, what is a valid method for assigning an address to the ERX Edge Router?() A.DHCP assigned addressesB.RADIUS assigned addressesC.IP numbered with a loopback referenceD.IP unnumbered with a loopback reference
In any NAT (network address translation) configuration, what is the Inside Global IP address?() A. The summarized address for all internal subnetted addresses.B. A private IP address assigned to a host on the inside network.C. A registered address that represents an inside host to an outside network.D. A unique IP address used on an internal networkE. Non of the above
If an ethernet port on a router was assigned an IP address of 172.16.112.1／20, what is the maximum number of hosts allowed on this subnet()。 A.1024B.2046C.4094D.4096E.8190
What is true about IP Source Guard with port security？（）A、Binding should be manually configured.B、It is not supported if IEEE 802.1x port-based authentication is enabled.C、The DHCP server must support option 82， or the client is not assigned an IP address.D、It filters based on source IP address only.
What does the "Inside Global" address represent in the configuration of NAT?（）A、the summarized address for all of the internal subnetted addressesB、the MAC address of the router used by inside hosts to connect to the InternetC、a globally unique， private IP address assigned to a host on the inside networkD、a registered address that represents an inside host to an outside network
On the network 131.1.123.0/27, what is the last IP address that can be assigned to a host?（）A、131.1.123.30B、131.1.123.31C、131.1.123.32D、131.1.123.33
When a DHCP server is configured, which two IP addresses should never be assignable to hosts? （）A、network or subnetwork IP addressB、broadcast address on the networkC、IP address leased to the LAND、IP address used by the interfacesE、manually assigned address to the clientsF、designated IP address to the DHCP server
What is the purpose of a network mask?（）A、It is used to identify the maximum hop count of a subnetworkB、It is used to identify an IP address as either private or publicC、It is used to identify the network to which an IP address belongsD、It is used to identify the total number of bits present in an IP address
In a PPP over ATM service offering, what is a valid method for assigning an address to the ERX Edge Router?（）A、DHCP assigned addressesB、RADIUS assigned addressesC、IP numbered with a loopback referenceD、IP unnumbered with a loopback reference
You have a Bridged 1483 service offering where each ATM PVC is assigned a /30 subnet. What are two characteristics of this configuration？（）A、It burns IP addresses.B、It conserves IP addresses.C、Both the client and the ERX Edge Router have IP addresses.D、The client has an IP address， but the ERX Edge Router uses an unnumbered address.
What is the principle reason to use a private IP address on an internal network?（）A、Subnet strategy for private companies.B、Manage and scale the growth of the internal network.C、Conserve public IP addresses so that we do not run out of them.D、Allow access reserved to the devices.
In any NAT (network address translation) configuration, what is the Inside Global IP address?（）A、The summarized address for all internal subnetted addresses.B、A private IP address assigned to a host on the inside network.C、A registered address that represents an inside host to an outside network.D、A unique IP address used on an internal networkE、Non of the above
What will happen if a private IP address is assigned to a public interface connected to an ISP?（）A、Addresses in a private range will be not routed on the Internet backbone.B、Only the ISP router will have the capability to access the public network.C、The NAT process will be used to translate this address in a valid IP address.D、Several automated methods will be necessary on the private network.E、A conflict of IP addresses happens, because other public routers can use the same range.
If an Ethernet port on a router was assigned an IP address of 172.1.1.1/20,what is the maximum number of hosts allowed on this subnet?（）A、4094B、1024C、8190D、2046E、4096
Which three options are supported as address allocation mechanisms for DHCP on Cisco routers?（）A、The IP address can be automatically assigned to a host.B、The IP address can be assigned as a random hash value of the burned - in - address of the lowest - numbered LAN interface on the router.C、The network administrator can assign a speci fic IP address to a specific host MAC address.D、The IP address can be assigned from configured pools in a reverse lexicographical order.E、The IP address can be assigned to a host for a limited time or until the host explicitly releases the address.F、The IP address can be assigned to a host until the host usurps the assigned value using its own dynamic override mechanism.
What is the purpose of a network mask?（）A、It is used to identify the maximum hop count of a subnetwork.B、It is used to identify an IP address as either private or public.C、It is used to identify the network to which an IP address belongs.D、It is used to identify the total number of bits present in an IP address.
单选题What will happen if a private IP address is assigned to a public interface connected to an ISP?（）AAddresses in a private range will be not routed on the Internet backbone.BOnly the ISP router will have the capability to access the public network.CThe NAT process will be used to translate this address in a valid IP address.DSeveral automated methods will be necessary on the private network.EA conflict of IP addresses happens, because other public routers can use the same range.
单选题On the network 131.1.123.0/27, what is the last IP address that can be assigned to a host?（）A131.1.123.30B131.1.123.31C131.1.123.32D131.1.123.33
单选题In any NAT (network address translation) configuration, what is the Inside Global IP address?（）AThe summarized address for all internal subnetted addresses.BA private IP address assigned to a host on the inside network.CA registered address that represents an inside host to an outside network.DA unique IP address used on an internal networkENon of the above
单选题What does the "Inside Global" address represent in the configuration of NAT（）。Athe summarized address for all of the internal subnetted addressesBthe MAC address of the router used by inside hosts to connect to the InternetCa globally unique, private IP address assigned to a host on the inside networkDa registered address that represents an inside host to an outside network
单选题You are the network administrator for Tailspin Toys. The company has a main office and two branch offices. The network in the main office contains 10 servers and 100 client computers. Each branch office contains 5 servers and 50 client computers. Each branch office is connected to the main office by a direct T1 line. The network design requires that company IP addresses must be assigned from a single classful private IP address range. The network is assigned a class C private IP address range to allocate IP addresses for servers and client computers. Tailspin Toys acquires a company named Wingtip Toys. The acquisition will increase the number of servers to 20 and the number of client computers to 200 in the main office. The acquisition is expected to increase the number of servers to 20 and the number of client computers to 200 in the branch offices. The acquisition will also add 10 more branch offices. After the acquisition， all branch offices will be the same size. Each branch office will be connected to the main office by a direct T1 line. The new company will follow the Tailspin Toys network design requirements. You need to plan the IP addressing for the new company. You need to comply with the network design requirement. What should you do？（）A Assign the main office and each branch office a new class A private IP address range. B Assign the main office and each branch office a new class B private IP address range.C Assign the main office and each branch office a subnet from a new class B private IP address range.D Assign the main office and each branch office a subnet from the current class C private IP address range.
单选题What is the purpose of a network mask?（）AIt is used to identify the maximum hop count of a subnetworkBIt is used to identify an IP address as either private or publicCIt is used to identify the network to which an IP address belongsDIt is used to identify the total number of bits present in an IP address
多选题In JUNOS software, what are two ways that the router ID is chosen?（）AChoose the lowest primary address.BIf assigned, always choose address of fxp0.CChoose numerically lowest IP address of fxp0.DChoose the non-127.0.0.1 primary address on lo0.
多选题In JUNOS software， what are two ways the router ID is chosen？（）AChoose the lowest primary address.BIf assigned，always choose address of fxp0.CChoose numerically highest IP address of lo0.DChoose numerically lowest IP address of fxp0.EChoose the non-127.0.0.1 primary address on lo0.
单选题What is the purpose of a network mask?（）AIt is used to identify the maximum hop count of a subnetwork.BIt is used to identify an IP address as either private or public.CIt is used to identify the network to which an IP address belongs.DIt is used to identify the total number of bits present in an IP address.