单选题The system administrator did a new install of AIX on a server about a week ago. The system was not rebooted after the installation. CDE is running on this system as is TCPIP. The system administrator has started configuring the system percompany directives. The power cable was inadvertently disconnected from the wall causing the sever to lose power. Upon reboot, the system appears to hang during log in from the console or from Xterminals. Which of the following is the most probable cause?（）AIt is a hardware problem caused by the power failure.BThere is a network problem, most probably with name resolution.CSine the system was never rebooted, devices are marked defined instead of available and need to be activated.DSome filesets may be marked as broken and need to be reinstalled.
单选题
The system administrator did a new install of AIX on a server about a week ago. The system was not rebooted after the installation. CDE is running on this system as is TCPIP. The system administrator has started configuring the system percompany directives. The power cable was inadvertently disconnected from the wall causing the sever to lose power. Upon reboot, the system appears to hang during log in from the console or from Xterminals. Which of the following is the most probable cause?（）
A
It is a hardware problem caused by the power failure.
B
There is a network problem, most probably with name resolution.
C
Sine the system was never rebooted, devices are marked defined instead of available and need to be activated.
D
Some filesets may be marked as broken and need to be reinstalled.
参考解析
解析：
暂无解析
相关考题：
A system administrator has just applied an update to an AIX system to correct a problem, The APAR number is IX49035 and was shipped as part of the PTF number U437542. After applying the APAR fix, the administrator wants to ensure that the fix is applied before informing the system users of the corrected problem. Which of the following commands should the system administrator run to verify that the APAR fix has been applied to the system?（）A.lslpp -f IX49035B.lslpp -fB U437542C.instfix -f IX49035D.instfix -ik IX49035
A system was rebooted and is taking a long time toreturn. The administrator has logged into the HMC and sees reference code 0c9.What does this mean?() A.The system is configuring a device.B.A system initiated dump has started.C.The system is varyingon a volume group.D.The system is running an inbuilt self test.
The system administrator did a new install of AIX on a server about a week ago. The system was not rebooted after the installation. CDE is running on this system as is TCPIP. The system administrator has started configuring the system percompany directives. The power cable was inadvertently disconnected from the wall causing the sever to lose power. Upon reboot, the system appears to hang during log in from the console or from Xterminals. Which of the following is the most probable cause?（）A.It is a hardware problem caused by the power failure.B.There is a network problem, most probably with name resolution.C.Sine the system was never rebooted, devices are marked defined instead of available and need to be activated.D.Some filesets may be marked as broken and need to be reinstalled.
A system administrator has edited the necessary files for setup of an AIX system to serve as a bootp server. Which of the following commands is required to complete the activation？（）A、telinit -qB、startsrc -s bootpdC、refresh -s inetd
An administrator has added a new device to a system and wants to determine if it has been correctly added to the ODM database. Which command would the system administrator use？（）A、odmgetB、odmaddC、odmshowD、odmcreate
A System p administrator plans to install a new system with AIX 5.3 TL5 using a NIM server. Which of the following provide post install diagnostics（）A、SPOTB、lpp_sourceC、mksysbD、install CD
A system administrator will be migrating a server from AIX 5.1 to AIX 5.2 and is uncertain if the application running on the server will function properly after the migration. What is the fastest way to return to the previous AIX level if the application does not work？（）A、Use base media to restore system to AIX 5.1.B、Use an alt_disk_install and boot back to the AIX 5.1 rootvg.C、Make a mksysb of the original AIX to restore back to the AIX 5.1 level.D、Perform the AIX 5.2 upgrade using update_all with the commit option and reject filesets to return to AIX 5.1.
The administrator has just installed a new memory module into the server. Now， the server is not showing the new memory. Which of the following should the administrator perform FIRST？（）A、System rebootB、Reseat the memoryC、Install the latest firmwareD、Install the latest driver
A system administrator has just finished upgrading a system to AIX 5.2. If there are future problems， the system administrator would like to add an entry to the AIX errorlog to record this event. Which of the following commands can be issued for this purpose？（）A、/usr/bin/errmsg "System upgraded to AIX 5.2"B、/usr/bin/errlog "System upgraded to AIX 5.2"C、/usr/bin/errupdate "System upgraded to AIX 5.2"D、/usr/bin/errlogger "System upgraded to AIX 5.2"
A new application has been added to a system which needs to automatically be started at system startup. The system administrator has decided to accomplish this by using the /etc/inittab file. Which command would be used to accomplish this in a supported manner？（）A、viB、mkitabC、telinitD、startsrc
After completing an installation of new software， a system administrator notices the system is slow. To troubleshoot the performance， which single AIX command could be used to provide a real-time display of CPU， memory and disk utilization（）A、topasB、vmoC、iostatD、netstat
A system administrator was able to boot a system from the AIX installation CDROM. The migration install was selected, but the process hung at 92% complete. The system administrator then rebooted the system, which subsequently hung at LED 552. Which of the following options is the most probable cause?（）A、The ODM is corrupted.B、There is a hardware failure.C、The bosboot command failed.D、Not enough space is available in the filesystems.
A system was rebooted and is taking a long time toreturn. The administrator has logged into the HMC and sees reference code 0c9. What does this mean?（）A、The system is configuring a device.B、A system initiated dump has started.C、The system is varyingon a volume group.D、The system is running an inbuilt self test.
A system administrator will use a mksysb from a uniprocessor microchannel server running AIX 5.1 to install a multiprocessor chrp server. What else is required？（）A、A 5.1 AIX base media setB、A 5.1 Additional Device Driver CDC、A mksysb of the multiprocessor chrp serverD、A savevg of the uniprocessor microchannel server
A system administrator has just applied an update to an AIX system to correct a problem, The APAR number is IX49035 and was shipped as part of the PTF number U437542. After applying the APAR fix, the administrator wants to ensure that the fix is applied before informing the system users of the corrected problem. Which of the following commands should the system administrator run to verify that the APAR fix has been applied to the system?（）A、lslpp -f IX49035B、lslpp -fB U437542C、instfix -f IX49035D、instfix -ik IX49035
单选题The system administrator did a new install of AIX on a server about a week ago. The system was not rebooted after the installation. CDE is running on this system as is TCPIP. The system administrator has started configuring the system percompany directives. The power cable was inadvertently disconnected from the wall causing the sever to lose power. Upon reboot, the system appears to hang during log in from the console or from Xterminals. Which of the following is the most probable cause?（）AIt is a hardware problem caused by the power failure.BThere is a network problem, most probably with name resolution.CSine the system was never rebooted, devices are marked defined instead of available and need to be activated.DSome filesets may be marked as broken and need to be reinstalled.
单选题A system administrator has just finished upgrading a system to AIX 5.2. If there are future problems， the system administrator would like to add an entry to the AIX errorlog to record this event. Which of the following commands can be issued for this purpose？（）A/usr/bin/errmsg System upgraded to AIX 5.2B/usr/bin/errlog System upgraded to AIX 5.2C/usr/bin/errupdate System upgraded to AIX 5.2D/usr/bin/errlogger System upgraded to AIX 5.2
单选题A system administrator has edited the necessary files for setup of an AIX system to serve as a bootp server. Which of the following commands is required to complete the activation？（）Atelinit -qBstartsrc -s bootpdCrefresh -s inetd
单选题A system administrator was able to boot a system from the AIX installation CDROM. The migration install was selected, but the process hung at 92% complete. The system administrator then rebooted the system, which subsequently hung at LED 552. Which of the following options is the most probable cause?（）AThe ODM is corrupted.BThere is a hardware failure.CThe bosboot command failed.DNot enough space is available in the filesystems.
单选题A system administrator will use a mksysb from a uniprocessor microchannel server running AIX 5.1 to install a multiprocessor chrp server. What else is required？（）AA 5.1 AIX base media setBA 5.1 Additional Device Driver CDCA mksysb of the multiprocessor chrp serverDA savevg of the uniprocessor microchannel server
单选题A System p administrator plans to install a new system with AIX 5.3 TL5 using a NIM server. Which of the following provide post install diagnostics（）ASPOTBlpp_sourceCmksysbDinstall CD
单选题A system was rebooted and is taking a long time toreturn. The administrator has logged into the HMC and sees reference code 0c9. What does this mean?（）AThe system is configuring a device.BA system initiated dump has started.CThe system is varyingon a volume group.DThe system is running an inbuilt self test.
单选题A system administrator will be migrating a server from AIX 5.1 to AIX 5.2 and is uncertain if the application running on the server will function properly after the migration. What is the fastest way to return to the previous AIX level if the application does not work？（）AUse base media to restore system to AIX 5.1.BUse an alt_disk_install and boot back to the AIX 5.1 rootvg.CMake a mksysb of the original AIX to restore back to the AIX 5.1 level.DPerform the AIX 5.2 upgrade using update_all with the commit option and reject filesets to return to AIX 5.1.
单选题A new application has been added to a system which needs to automatically be started at system startup. The system administrator has decided to accomplish this by using the /etc/inittab file. Which command would be used to accomplish this in a supported manner？（）AviBmkitabCtelinitDstartsrc
单选题A system administrator decides to review the system error log after installing new hardware. Which of the following is the correct command to use？（）AerrptBsyslogCprtdiagDerrlogger
单选题After completing an installation of new software， a system administrator notices the system is slow. To troubleshoot the performance， which single AIX command could be used to provide a real-time display of CPU， memory and disk utilization（）AtopasBvmoCiostatDnetstat
单选题A system administrator has just applied an update to an AIX system to correct a problem, The APAR number is IX49035 and was shipped as part of the PTF number U437542. After applying the APAR fix, the administrator wants to ensure that the fix is applied before informing the system users of the corrected problem. Which of the following commands should the system administrator run to verify that the APAR fix has been applied to the system?（）Alslpp -f IX49035Blslpp -fB U437542Cinstfix -f IX49035Dinstfix -ik IX49035
单选题An administrator has added a new device to a system and wants to determine if it has been correctly added to the ODM database. Which command would the system administrator use？（）AodmgetBodmaddCodmshowDodmcreate