登录7302 cli，以下是命令show xdsl operational-data near-end channel 1/1/4/3执行后的结果信息。 ============================================================ channel table ============================================================ if-index actual-bitrate-up attain-bitrate-up interleave-delay-down imp-noise-prot-down ------------------------------------------------------------------------------------------------------------------------------------ 1/1/4/3 128 704 8 11 ------------------------------------------------------------------------------------------------------------------------------------ channel count : 1 ============================================================ 根据以上信息判断，端口1/1/4/3上下行最大可达速率为（）kbit/s。A、128B、704C、8D、无法确定
登录7302 cli，以下是命令show xdsl operational-data near-end channel 1/1/4/3执行后的结果信息。 ============================================================ channel table ============================================================ if-index actual-bitrate-up attain-bitrate-up interleave-delay-down imp-noise-prot-down ------------------------------------------------------------------------------------------------------------------------------------ 1/1/4/3 128 704 8 11 ------------------------------------------------------------------------------------------------------------------------------------ channel count : 1 ============================================================ 根据以上信息判断，端口1/1/4/3上下行最大可达速率为（）kbit/s。
- A、128
- B、704
- C、8
- D、无法确定
相关考题：
Which CLI command displays the PPPoE customers that are currently connected to the ERX?() A. show usersB. show connectedC. show subscribersD. show ip subscribers
Which CLI command displays the IS－IS level used by each interface?() A. show clns neighborB. show isis neighborC. show clns interfaceD. show isis interface
登录7302 cli，以下是命令info configure system management 执行后的结果信息。 #----------------------------------------------------------------------------------------------------------------------------------- echo "system" #----------------------------------------------------------------------------------------------------------------------------------- management host-ip-address manual:172.17.4.10/28 default-route 172.17.4.1 exit exit #----------------------------------------------------------------------------------------------------------------------------------- 根据以上信息判断，以下地址中与7302管理地址不是同网段的是（）。A、172.17.4.8B、172.17.4.12C、172.17.4.14D、172.17.4.16
登录7302 cli，以下是命令info configure system shub执行后的结果信息。 #----------------------------------------------------------------------------------------------------------------------------------- echo "system" #----------------------------------------------------------------------------------------------------------------------------------- sntp server-ip-addr 61.139.37.226 enable exit filter shub-manager 1 src-ip-addr 61.139.37.226 exit exit entry ip def-ip-addr 10.0.0.1/8 def-gateway 10.0.0.3 exit id contact location exit software sw-ver-name LANX sw-release-num 1.0.0.1 exit vlan ext-vlan-id 4003 exit exit #----------------------------------------------------------------------------------------------------------------------------------- 根据以上信息判断，该节点的管理VLAN是（）。A、4003B、4093C、4094D、无法确定
登录7302 cli，以下是命令info configure system management 执行后的结果信息。 #----------------------------------------------------------------------------------------------------------------------------------- echo "system" #----------------------------------------------------------------------------------------------------------------------------------- management host-ip-address manual:172.17.4.10/28 default-route 172.17.4.1 exit exit #----------------------------------------------------------------------------------------------------------------------------------- 根据以上信息判断，7302管理IP地址的子网掩码是（）。A、255.255.255.0B、255.255.255.192C、255.255.255.240D、255.255.255.252
登录7302 cli，以下是命令show vlan fdb 120执行后的结果信息。 ============================================================ fdb table ============================================================ vlanid mac port bridge-port status ------------------------------------------------------------------------------------------------------------------------------------ 120 00:e0:8e:d1:ed:3a 1/1/4/20:0:35 52 learned ------------------------------------------------------------------------------------------------------------------------------------ fdb count : 1 ============================================================ 根据以上信息判断，该VLAN 120上所学习到的MAC地址00:e0:8e:d1:ed:3a是（）。A、属于用户端口1/1/4/20：0：35B、属于uplink端口C、属于shub上对应的LT板卡的端口D、无法确定
登录7302 cli，以下是命令show vlan fdb 2101执行后的结果信息。 ============================================================ fdb table ============================================================ vlanid mac port bridge-port status ------------------------------------------------------------------------------------------------------------------------------------ 2101 00:e0:8e:d1:7e:67 1/1/4/1:8:35 753 learned ------------------------------------------------------------------------------------------------------------------------------------ fdb count : 1 ============================================================ 根据以上信息判断，与VLAN 2101绑定的用户端口是（）kbit/s。A、1/1/4/1：0：35B、1/1/4/1：8：32C、1/1/4/1：8：35D、无法确定
登录7302 cli，以下是命令info configure vlan执行后的部分结果信息。 vlan broadcast-frames priority-policy port-default id 1001 mode cross-connect exit shub id 1001 mode cross-connect egress-port lt:1/1/6 exit egress-port network:4 exit exit exit exit 根据以上信息判断，有关VLAN 1001，以下说法中错误的是（）。A、VLAN 1001是该节点的管理VLANB、VLAN 1001是crossconnection模式C、VLAN 1001所对应的LT板卡是第3块LT板卡D、VLAN 1001所对应的uplink端口是NTI/O接口板卡上的端口1
登录7302 cli，以下是命令info configure ip执行后的结果信息。同时可知，AWS地址61.139.37.226可以ping通该节点。 #----------------------------------------------------------------------------------------------------------------------------------- echo "ip" #----------------------------------------------------------------------------------------------------------------------------------- shub vrf 0 name defaultVRF route-dest 127.0.0.0/24 next-hop 0.0.0.0 vlan-id 4094 exit route-dest 61.139.37.224/30 next-hop 172.17.4.1 vlan-id 4003 exit route-dest 172.17.4.0/24 next-hop 0.0.0.0 vlan-id 4003 exit exit exit #----------------------------------------------------------------------------------------------------------------------------------- 根据以上信息判断，7302的管理VLAN是（）。A、4003B、4093C、4094D、无法确定
登录7302 cli，以下是命令info configure bridge port 1/1/4/1:0:35执行后的结果信息。 #----------------------------------------------------------------------------------------------------------------------------------- echo "bridge" #----------------------------------------------------------------------------------------------------------------------------------- port 1/1/4/1:0:35 pvid 1001 max-unicast-mac 4 vlan-id 1001 exit exit #----------------------------------------------------------------------------------------------------------------------------------- 根据以上信息判断，端口1/1/4/1上设定的最多可学习的MAC地址数是（）。A、1B、2C、4D、8
在7302 cli中执行命令show interface Shub port，部分结果如下。 isadmin# show interface shub port ============================================================ port table ============================================================ port admin-status oper-status speed type duplex ------------------------------------------------------------------------------------------ 1 up up ten-mbps network half 2 up down one-gb network full 3 down down one-gb unused full ============================================================ 以下说法错误的是：（）。A、该节点启用了2个网络口B、该7302节点的网络口1link已经UpC、该节点网络口1协商后的模式为10M半双工D、该节点的网络口1即NTIO板卡上的端口1
登录7302 cli，以下是命令info configure system management 执行后的结果信息。 #----------------------------------------------------------------------------------------------------------------------------------- echo "system" #----------------------------------------------------------------------------------------------------------------------------------- management host-ip-address manual:172.17.4.10/28 default-route 172.17.4.1 exit exit #----------------------------------------------------------------------------------------------------------------------------------- 根据以上信息判断，7302的网关地址是（）。A、172.17.4.10B、172.17.4.11C、172.17.4.1D、172.17.4.255
登录7302 cli，以下是命令info configure bridge port 1/1/4/1:0:35执行后的结果信息。 #----------------------------------------------------------------------------------------------------------------------------------- echo "bridge" #----------------------------------------------------------------------------------------------------------------------------------- port 1/1/4/1:0:35 pvid 1001 max-unicast-mac 4 vlan-id 1001 exit exit #----------------------------------------------------------------------------------------------------------------------------------- 根据以上信息判断，端口1/1/4/1上绑定的VLAN ID是（）。A、1000B、1001C、4093D、无法判断
Which CLI command ensures that RADIUS packets are being sent to and received from the RADIUS server?（）A、show radiusB、show aaa domain-mapC、show aaa statisticsD、show radius authentication server
申请UAP3300的license时，获取ESN的途径有（）。A、读取机框上贴的整机条码B、读取外包装木箱上贴的整机条码C、登录UAP3300，执行命令“show ESN”D、登录UAP3300，执行命令“show license”
Which CLI command displays the metrics associated with each advertised route?（）A、show clns databaseB、show isis database detailC、show clns database detailD、show isis database extensive
Which CLI command displays the currently connected PPPoA subscribers?（）A、show usersB、show subscribersC、show aaa subscriberD、show connected subscriber
Which CLI command displays the IS-IS level used by each interface?（）A、show clns neighborB、show isis neighborC、show clns interfaceD、show isis interface
What are two ways to view the system log files on a WX device? （）(Choose two.)A、Use the CLI and enter show log.B、Use the CLI and enter show all.C、Use the CLI and enter show logging.D、In WebView, choose Admin Tools Display System Log.
多选题What are two ways to view the system log files on a WX device? （）(Choose two.)AUse the CLI and enter show log.BUse the CLI and enter show all.CUse the CLI and enter show logging.DIn WebView, choose Admin Tools Display System Log.
多选题申请UAP3300的license时，获取ESN的途径有（）。A读取机框上贴的整机条码B读取外包装木箱上贴的整机条码C登录UAP3300，执行命令“show ESN”D登录UAP3300，执行命令“show license”