A new trunk has been configured on a switch in the Ezonexam LAN. By default, which VLANs are allowed over this trunk link?A. No VLANsB. Only the VLANs that are specified when creating the trunkC. Only VLANs 1-64D. All VLANsE. All VLAN's except VLAN 1F. None of the above
A new trunk has been configured on a switch in the Ezonexam LAN. By default, which VLANs are allowed over this trunk link?
A. No VLANs
B. Only the VLANs that are specified when creating the trunk
C. Only VLANs 1-64
D. All VLANs
E. All VLAN's except VLAN 1
F. None of the above
相关考题：
A new Ezonexam switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?A．All defined VLANs are allowed on the trunk by default.B．Each VLAN, or VLAN range, that is specified with the switchport mode command.C．Each VLAN, or VLAN range, that is specified with the vtp domain command.D．Each VLAN, or VLAN range, that is specified with the vlan database command.E．None of the above
What are some of the characteristics of a typical VLAN arrangement, found throughout the Ezonexam switched LAN? (Select all that apply)A. VLANs logically divide a switch into multiple, independent switches at Layer 2.B. Trunk links can carry traffic for multiple VLANs.C. VLAN implementation significantly increases traffic due to added trunking information.D. A VLAN can span multiple switches.E. VLANs typically increase the number of switches neededF. VLANs typically decrease the number of switches needed
Refer to Topic TestKing.com in iPAD document.What happens to the network when TestKingX is reconnected and a trunk exists between the two switches?() A. All VLANs except the default VLAN will be removed from all switches.B. All existing switches will have the students, admin, faculty, Servers, Management,Production, and no-where VLANs.C. The VLANs Servers, Management, Production, and no-where will replace the VLANs on SwX.D. The VLANs Servers, Management, Production, and no-where will be removed from existing switches.
When a new trunk link is configured on an IOS based switch, which VLANs are allowed over the link?() A. All defined VLANs are allowed on the trunk by default.B. Each VLAN, or VLAN range, that is specified with the switchport mode command.C. Each VLAN, or VLAN range, that is specified with the vtp domain command.D. Each VLAN, or VLAN range, that is specified with the vlan database command.
A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?() A. All defined VLANs are allowed on the trunk by default.B. Each VLAN, or VLAN range, that is specified with the switchport mode command.C. Each VLAN, or VLAN range, that is specified with the vtp domain command.D. Each VLAN, or VLAN range, that is specified with the vlan database command.
A company has a small network,consisting of a single switch and a single router.The switch has been configured with two vlans,and route-on-a-stick is being configured on the router for inter-vlan routing.A trunk is configured to connect the switch to the router.What is the minimum number of router subinterfaces that are required for all the vlans to communicate?（）A. oneB. threeC. twoD. zero
Refer to the exhibit.All switch ports are assigned to the correct VLANs, but none of the hosts connected to SwitchA can communicate with hosts in the same VLAN connected to SwitchB. Based on the output shown, what is the most likely problem?（）A.The access link needs to be configured in multiple VLANs.B.The link between the switches is configured in the wrong VLAN.C.The link between the switches needs to be configured as a trunk.D.VTP is not configured to carry VLAN information between the switches.E.Switch IP addresses must be configured in order for traffic to be forwarded between the switches
When a new trunk link is configured on an IOS based switch, which VLANs are allowed over the link()。 A.By default, all defined VLANs are allowed on the trunk.B.Each single VLAN, or VLAN range, must be specified with the switchport mode command.C.Each single VLAN, or VLAN range, must be specified with the vtp domain command.D.Each single VLAN, or VLAN range, must be specified with the vlan database command.
A company has a small network，consisting of a single switch and a single router. The switch has been configured with two vlans，and route-on-a-stick is being configured on the router for inter-vlan routing. A trunk is configured to connect the switch to the router.What is the minimum number of router subinterfaces that are required for all the vlans to communicate？（）A.oneB.threeC.twoD.zero
When a new trunk is configured on a 2950 switch, which VLANs by default are allowed over the trunk link()。 A.no VLANsB.all VLANsC.only VLANs 1 - 64D.only the VLANs that are specified when creating the trunk
Which statement is most correct regarding vNICs and VLANs?（）A、only the default vlan has traffic that is taggedB、All vNICs have to be associated with one or more VLANs except for the default vlanC、vlan must be configured before configuring them into a vNICD、Tagging is done by the operating system NIC if the flag is set to tag traffic
You have configured voice VLANs on Catalyst switch R1. Which two statements are true about the operation of voice VLANs on this device？ （）A、 When the voice VLAN feature is enabled， all untagged traffic is sent according to the default CoS priority of the port.B、 Enabling voice VLANs enables the switch to create multiple queues for traffic that is entering a port.C、 When voice VLANs are configured on a trunk link， UplinkFast must also be enabled.D、 Voice VLANs are configured to enable the switch to forward frames marked with the proper CoS values over separate physical links.E、 Enabling voice VLANs enables the switch to forward frames with a specific 802.1P marking.
A switch has been configured with two vlans and is connected to a router with a trunk for inter-vlan routing.OSPF has been configured on the router，as the routing protocol for the network.Which statement about thisnetwork is true？（）A、For the two vlans to communicate，a network statement for the trunk interface needs to be added to the OSPF configuration.B、For the two vlans to communicate， a network statement for each subinterface needs to be added to the OSPF configuration.C、Direct inter-vlan communication does not require OSPFD、OSPF cannot be used if router-on-a-stick is configured on the router
Refer to Topic TestKing.com in iPAD document.What happens to the network when TestKingX is reconnected and a trunk exists between the two switches?（）A、All VLANs except the default VLAN will be removed from all switches.B、All existing switches will have the students, admin, faculty, Servers, Management,Production, and no-where VLANs.C、The VLANs Servers, Management, Production, and no-where will replace the VLANs on SwX.D、The VLANs Servers, Management, Production, and no-where will be removed from existing switches.
The DAI feature has been implemented in the Company switched LAN. Which three statements are true about the dynamic ARP inspection （DAI） feature？ （）A、 DAI can be performed on ingress ports only.B、 DAI can be performed on both ingress and egress ports.C、 DAI is supported on access ports， trunk ports， EtherChannel ports， and private VLAN ports. D、 DAI should be enabled on the root switch for particular VLANs only in order to secure the ARP caches of hosts in the domain.E、 DAI should be configured on all access switch ports as untrusted and on all switch ports connected to other switches as trusted.F、 DAI is supported on access and trunk ports only.
A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?（）A、All defined VLANs are allowed on the trunk by default.B、Each VLAN, or VLAN range, that is specified with the switchport mode command.C、Each VLAN, or VLAN range, that is specified with the vtp domain command.D、Each VLAN, or VLAN range, that is specified with the vlan database command.
You are troubleshooting a Catalyst 5000 trunk in the network. What should you do if there’s adisagreement about the VLANs configured to use the trunk？（）A、Reload the active VLAN configurationB、Clear the affected port and bring it up againC、Explicitly set the trunk for the VLAN to be onD、Remove all the VLANs set
Refer to the exhibit A frame on vlan 1on switch s1 is sent to switch s2 when the frame is received on vlan 2,what causes this behavior?（）A、trunk mode mismatchesB、vlans that do not correspond to a unique IP subnetC、native vlan mismatchesD、allowing only vlan 2 on the destination.
When a new trunk is configured on a 2950 switch, which VLANs by default are allowed over the trunk link（）。A、no VLANsB、all VLANsC、only VLANs 1 - 64D、only the VLANs that are specified when creating the trunk
When a new trunk link is configured on an IOS based switch, which VLANs are allowed over the link?（）A、All defined VLANs are allowed on the trunk by default.B、Each VLAN, or VLAN range, that is specified with the switchport mode command.C、Each VLAN, or VLAN range, that is specified with the vtp domain command.D、Each VLAN, or VLAN range, that is specified with the vlan database command.
单选题Refer to the exhibit A frame on vlan 1 on switch s1 is sent to switch s2 when the frame is received on vlan 2,what causes this behavior?（）A trunk mode mismatchesB vlans that do not correspond to a unique IP subnetC native vlan mismatchesD allowing only vlan 2 on the destination.
多选题You have configured voice VLANs on Catalyst switch R1. Which two statements are true about the operation of voice VLANs on this device？ （）AWhen the voice VLAN feature is enabled， all untagged traffic is sent according to the default CoS priority of the port.BEnabling voice VLANs enables the switch to create multiple queues for traffic that is entering a port.CWhen voice VLANs are configured on a trunk link， UplinkFast must also be enabled.DVoice VLANs are configured to enable the switch to forward frames marked with the proper CoS values over separate physical links.EEnabling voice VLANs enables the switch to forward frames with a specific 802.1P marking.
单选题A switch has been configured with two vlans and is connected to a router with a trunk for inter-vlan routing.OSPF has been configured on the router，as the routing protocol for the network.Which statement about thisnetwork is true？（）AFor the two vlans to communicate，a network statement for the trunk interface needs to be added to the OSPF configuration.BFor the two vlans to communicate， a network statement for each subinterface needs to be added to the OSPF configuration.CDirect inter-vlan communication does not require OSPFDOSPF cannot be used if router-on-a-stick is configured on the router
多选题The DAI feature has been implemented in the Company switched LAN. Which three statements are true about the dynamic ARP inspection （DAI） feature？ （）ADAI can be performed on ingress ports only.BDAI can be performed on both ingress and egress ports.CDAI is supported on access ports， trunk ports， EtherChannel ports， and private VLAN ports.DDAI should be enabled on the root switch for particular VLANs only in order to secure the ARP caches of hosts in the domain.EDAI should be configured on all access switch ports as untrusted and on all switch ports connected to other switches as trusted.FDAI is supported on access and trunk ports only.
单选题When a new trunk link is configured on an IOS based switch, which VLANs are allowed over the link?（）AAll defined VLANs are allowed on the trunk by default.BEach VLAN, or VLAN range, that is specified with the switchport mode command.CEach VLAN, or VLAN range, that is specified with the vtp domain command.DEach VLAN, or VLAN range, that is specified with the vlan database command.
单选题When a new trunk is configured on a 2950 switch, which VLANs by default are allowed over the trunk link（）。Ano VLANsBall VLANsConly VLANs 1 - 64Donly the VLANs that are specified when creating the trunk
单选题A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?（）AAll defined VLANs are allowed on the trunk by default.BEach VLAN, or VLAN range, that is specified with the switchport mode command.CEach VLAN, or VLAN range, that is specified with the vtp domain command.DEach VLAN, or VLAN range, that is specified with the vlan database command.